• 제목/요약/키워드: Performance based test procedure

검색결과 264건 처리시간 0.03초

Cyclic testing of scaled three-story special concentrically braced frame with strongback column

  • Chen, Chui-Hsin;Tsai, Yi-Rung;Tang, Yao
    • Earthquakes and Structures
    • /
    • 제17권2호
    • /
    • pp.163-173
    • /
    • 2019
  • For Special Concentrically Braced Frame (SCBF), it is common that the damage concentrates at a certain story instead of spreading over all stories. Once the damage occurs, the soft-story mechanism is likely to take place and possibly to result in the failure of the whole system with more damage accumulation. In this study, we use a strongback column which is an additional structural component extending along the height of the building, to redistribute the excessive deformation of SCBF and activate more structural members to dissipate energy and thus avoid damage concentration and improve the seismic performance of SCBF. We tested one-third-scaled, three-story, double-story X SCBF specimens with static cyclic loading procedure. Three specimens, namely S73, S42 and S0, which represent different combinations of stiffness and strength factors ${\alpha}$ and ${\beta}$ for the strongback columns, were designed based on results of numerical simulations. Specimens S73 and S42 were the specimens with the strongback columns, and S0 is the specimen without the strongback column. Test results show that the deformation distribution of Specimen S73 is more uniform and more brace members in three stories perform nonlinearly. Comparing Drift Concentration Factor (DCF), we can observe 29% and 11% improvement in Specimen S73 and S42, respectively. This improvement increases the nonlinear demand of the third-story braces and reduces that of the first-story braces where the demand used to be excessive, and, therefore, postpones the rupture of the first-story braces and enhances the ductility and energy dissipation capacity of the whole SCBF system.

유통 한약재의 잔류농약 및 잔류이산화황의 함량 분석 (The analysis of Residual Pesticides and Sulfur Dioxide in Commercial Medicinal Plants)

  • 김태희;장설;이아름;이아영;최고야;김호경
    • 대한본초학회지
    • /
    • 제27권6호
    • /
    • pp.43-48
    • /
    • 2012
  • Objectives : This study was investigated to determine the contents of pesticide residues and sulfur dioxide residues in commercial herbal medicines in Korea. Methods : Chromatographic test was performed on 100 samples consisted with 10 kinds of medicinal plants including improted and domestic products. To establish 19 pesticide residues (DDE, DDD, DDT, Dieldrin, Methoxychlor, BHC isomers, Aldrin, Endosulfan isomers, Endrin, Captan, Procymidone, Chlorpyrifos and Imidacloprid) in commercial herbal medicines, chromatographic equipments were used with the gas chromatography-mass detector and gas chromatography-electron capture detector for qualitative analysis. The imidacloprid analysis was performed by high performance liquid chromatograpgy-ultraviolet detector at 270 nm UV wavelength. The contents of sulfur dioxides were analyzed by modified Monnier-Williams method. All methods were based on notification procedure of Korea Food & Drug Administration (KFDA). Results : The residual pesticides were not founded in improted and domestic samples. Among 100 samples, the residues of sulfur dioxide in 73 samples were not detected and 25 samples showed contents in the range of 0~21.90 mg/kg. The excess samples of MRLs were 2 samples (30 mg/kg to medicinal herbs), Asiasari Radix et Rhizoma (Imported product) and the average amount of sulfur dioxide in 2 unsuitable samples were 14.83 mg/kg. These samples were found to transgress KFDA regulatory guidance of residual sulfur dioxide. Conclusion : These results are able to use as basic data to improve the reliability and value of commercial medicinal herbs.

교양 프로그래밍 수업에서 e-포트폴리오를 활용한 만족도와 학습 효과에 관한 연구 (A study on the satisfaction and learning effect using e-portfolio in liberal arts programming classes)

  • 이영석
    • 산업융합연구
    • /
    • 제20권2호
    • /
    • pp.45-50
    • /
    • 2022
  • 본 연구에서는 비대면 교육 환경에서의 질적 개선을 위하여 교수-학습 활동 전반적인 과정을 데이터로 처리하면서 학생들과 소통할 수 있는 e-포트폴리오 시스템을 구성하고 활용하였다. e-포트폴리오는 교수자의 수업 계획부터 성찰의 전 과정을 지원하면서, 수업 운영 과정에서 학습자의 이해도를 정기적으로 확인하고, 온라인상에서 의사소통하며 학습자 중심의 교육 활동을 지원할 수 있도록 구성하였다. 비전공 학생들이 어려워할 수 있는 교양의 프로그래밍 수업에서 e-포트폴리오를 활용한 교수자와 학습자의 의사소통 기반의 학습 효과인 효용성을 분석한 결과, 문제해결력 기반의 과제와 중간고사와 기말고사에서 유의미한 상관이 나타났다. 또한, e-포트폴리오의 만족도를 나타내는 확대 적용성을 분석한 결과, 학생들의 컴퓨팅사고력 검사 결과와 함께 과제, 학업 성적 등과 유의미한 상관이 나타났고, 컴퓨팅사고력의 향상에 유의미한 영향을 주는 것으로 나타났다. 제안하는 e-포트폴리오 시스템 형태를 활용하여 비대면 교육을 실시한다면, 학생들과 효율적으로 소통하면서 비대면 교육의 품질을 향상시킬 수 있을 것이다.

폭발하중을 받는 콘크리트 구조물의 실험적 거동분석 : (I) 실험수행절차 (Behavior Analysis of Concrete Structure under Blast Loading : (I) Experiment Procedures)

  • 이나현;김성배;김장호;최종권
    • 대한토목학회논문집
    • /
    • 제29권5A호
    • /
    • pp.557-564
    • /
    • 2009
  • 최근, 테러 및 전쟁과 관련된 폭발사고가 빈번히 발생하고 있으며, 특히 도심지에서는 이러한 폭발사고로 인해 인명피해 뿐 아니라 주요 시설물에도 큰 손상이 가해져 제2차, 3차의 피해가 발생하게 된다. 폭발사고에 대하여 인명 및 시설물을 안전하게 보호하기 위해서는 기본적으로 구조물에 가해지는 폭발하중 효과에 대한 이해가 필요하다. 폭발하중은 매우 빠른 시간 내에 콘크리트 구조물에 큰 압력으로 작용하는 하중이므로 변형률 속도와 구조물의 국부적인 손상을 고려하여 동적응답을 평가해야 한다. 일반적으로, 콘크리트는 다른 건설재료에 비해 상대적으로 높은 폭발저항성을 가진 재료로 알려져 있다. 그러나 폭발실험이라는 특수한 실험조건으로 인하여 국내외적으로 실험에 관련된 정보 및 결과 공유가 상당히 제한적으로 이뤄지고 있는 실정이다. 그러므로 본 논문에서는 폭발에 의한 압력하중이 철근콘크리트 구조물에 미치는 영향과 방호성능을 평가하기 위하여 국방과학시험연구소 다락대 시험장에서 $1.0m{\times}1.0m{\times}150mm$의 철근콘크리트 슬래브 구조물을 제작하여 시편으로부터 높이 1.5 m에서 TNT 9 lbs와 TNT 35 lbs으로 예비시험을 수행하였으며, 동일한 이격거리(standoff)에서 ANFO 35 lbs으로 본 실험을 수행하였다. 이는 국내 최초 민간에서 수행되어진 실험으로써, 첫 번째 논문에서는 폭발실험을 하기 위한 기본적인 실험 구성 및 구조물의 거동을 측정하기 위한 계측장비 구성에 대하여 검토하여 계측 시스템의 구축 및 폭파시험 수행절차를 구축하고자 한다. 센서, 시그널 컨디셔너, DAQ시스템, 소프트웨어로 구축된 계측 시스템을 바탕으로 정립된 폭파시험 수행절차는 향후 국내의 방호설계 및 폭발하중을 받는 구조물의 효과적인 거동계측 등 관련 연구분야의 기초자료가 될 것이라고 판단되는 바이다.

환경대기 중 저분자 PAHs 측정을 위한 흡착-열탈착-GC/MS 방법의 적용 (Application of Adsorption Sampling and Thermal Desorption with GC/MS Analysis for the Measurement of Low-Molecular Weight PAHs in Ambient Air)

  • 서석준;서영교;황윤정;정동희;백성옥
    • 한국대기환경학회지
    • /
    • 제30권4호
    • /
    • pp.362-377
    • /
    • 2014
  • Polycyclic aromatic hydrocarbons (PAHs) have been of particular concern since they are present both in the vapor and particulate phases in ambient air. In this study, a simple method was applied to determine the vapor phase PAHs, and the performance of the new method was evaluated with a conventional method. The simple method was based on adsorption sampling and thermal desorption with GC/MS analysis, which is generally applied to the determination of volatile organic compounds (VOCs) in the air. A combination of Carbotrap (300 mg) and Carbotrap-C (100 mg) sorbents was used as the adsorbent. Target compounds included two rings PAHs such as naphthalene, acenaphthylene, and acenaphthene. Among them, naphthalene was listed as one of the main HAPs together with a number of VOCs in petroleum refining industries in the USA. For comparison purposes, a method based on adsorption sampling and solvent extraction with GC/MS analysis was adopted, which is in principle same as the NIOSH 5515 method. The performance of the adsorption sampling and thermal desorption method was evaluated with respect to repeatabilities, detection limits, linearities, and storage stabilities for target compounds. The analytical repeatabilities of standard samples are all within 20%. Lower detection limits was estimated to be less than 0.1 ppbv. In the results from comparison studies between two methods for real air samples. Although the correlation coefficients were more than 0.9, a systematic difference between the two groups was revealed by the paired t-test (${\alpha}$=0.05). Concentrations of two-rings PAHs determined by adsorption and thermal desorption method consistently higher than those by solvent extraction method. The difference was caused by not only the poor sampling efficiencies of XAD-2 for target PAHs and but also sample losses during the solvent extraction and concentration procedure. This implies that the levels of lower molecular PAHs tend to be underestimated when determined by a conventional PAH method utilizing XAD-2 (and/or PUF) sampling and solvent extraction method. The adsorption sampling and thermal desorption with GC analysis is very simple, rapid, and reliable for lower-molecular weight PAHs. In addition, the method can be used for the measurement of VOCs in the air simultaneously. Therefore, we recommend that the determination of naphthalene, the most volatile PAH, will be better when it is measured by a VOC method instead of a conventional PAH method from a viewpoint of accuracy.

Forsythia suspensa Extract Has the Potential to Substitute Antibiotic in Broiler Chicken

  • Han, X.;Piao, X.S.;Zhang, H.Y.;Li, P.F.;Yi, J.Q.;Zhang, Q.;Li, P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권4호
    • /
    • pp.569-576
    • /
    • 2012
  • Two experiments were conducted to investigate the potential for Forsythia suspensa extract (FSE) to substitute for antibiotic in broiler chicken. First, a well-diffusion assay procedure and a 2-fold dilution method were used to determine the bacteriostatic activity of FSE on Escherichia coli K88, staphylococcus aureus, and salmonella was assayed. An inhibitory effect of FSE was observed on the growth of these bacteria. This effect seems to be dose depended, which disappeared after 25.00, 12.50, 1.56 mg/ml. Second, a 42-d trial with 252 broiler chickens (d 1, $38.7{\pm}1.1$ g BW) was conducted to evaluate the effect of dietary supplementation of FSE in broiler chicken. The feeding program consisted of a starter diet from d 1 to 21 and a finisher diet from d 22 to 42. Dietary treatments included were: i) NC: negative control fed a corn-soybean meal based diet; ii) PC: positive control group fed based diet with chlortetracycline; and iii) FC: a test group fed with 100 mg FSE/kg diet. In this study growth performance did not differ among treatments during the starter period. However, dietary supplemental chlortetracycline and FSE increased (p<0.05) average daily gain (ADG), average daily feed intake (ADFI) compared with NC during the finisher and overall phase. Apparent digestibility of calcium on d 21, digestibility of energy and calcium on d 42 of FC was greater (p<0.05) than NC. Moreover, cecal Escherichia coli counts for birds from FC were lower (p<0.05) than NC. Dietary FSE supplementation also improved (p<0.05) villus height and villus height to crypt depth ratios in both duodenum and ileum and decreased (p<0.05) crypt depth in the duodenum. Duodenum villus height and villus height to crypt depth ratio in both duodenum and ileum from the FC group were also greater (p<0.05). Serum growth hormone and IGF-1 were not influenced by different treatments. Apparently, FSE has the potential to substitute for antibiotic in broiler chicken.

실내공기질 공정시험법 중 VOCs 측정방법의 문제점 고찰 및 개선방안에 관한 연구 (Critical Evaluation of and Suggestions for the VOCs Measurement Method Established as the Korean Indoor Air Quality Standard Method)

  • 예진;정동희;백성옥
    • 한국대기환경학회지
    • /
    • 제30권6호
    • /
    • pp.586-599
    • /
    • 2014
  • During the last two decades, indoor air quality and volatile organic compounds (VOCs) have been of concern in Korean society due to their nature of potential health impacts. In order to investigate the pollution levels of VOCss in indoor environments, establishment of a solid test method for monitoring the airborne VOCss is essential. In Korea, a method based on adsorbent sampling and GC analysis coupled with thermal desorption was proclaimed as the Korea Standard Method for Indoor Air Quality Test. This study was carried out to examine some inherent problems of the VOCs measurement method. The VOCs method does not describe in detail preparing the standard samples. The standard samples may be prepared by impregnation of either liquid standard solutions or a mixture of standard gases. In this study, we investigated the optimal temperature condition for transferring the liquid standards onto a standard adsorbent tube. As a result, keeping the impregnation temperature at $250^{\circ}C$ will be recommended in regard of the boiling points of multiple target analytes and the thermal stability of the adsorbent. We also demonstrated some problems associated with handling of a syringe used for transferring the standard solutions onto the adsorbent tubes, and a best way to get rid of the syringe problems was suggested. Finally, a number of field works were conducted to evaluate the performance of adsorbent sampling methods. Comparison of different adsorbent tubes, i.e. tube packed with single sorbent (Tenax) and double sorbents (Tenax with Carbotrap), revealed that 30 to 40% differences between the two groups, implying that sampling efficiency is depending on the volatility and the strength of adsorbents. However, duplicate precisions for VOCs sampling with a same type of adsorbent and at same flow rates appeared to be satisfactory to be all within 20%, which is a quality control guideline. Distributed volume precisions were also found to be within a guideline value, 25%, although the precision was in general inferior to the duplicate precision. The Korea indoor VOCs test method should be more refined and improved in many aspects, particularly procedure and instrumentation for preparing the standard samples and specification of quality control assessment.

개선된 배깅 앙상블을 활용한 기업부도예측 (Bankruptcy prediction using an improved bagging ensemble)

  • 민성환
    • 지능정보연구
    • /
    • 제20권4호
    • /
    • pp.121-139
    • /
    • 2014
  • 기업의 부도 예측은 재무 및 회계 분야에서 매우 중요한 연구 주제이다. 기업의 부도로 인해 발생하는 비용이 매우 크기 때문에 부도 예측의 정확성은 금융기관으로서는 매우 중요한 일이다. 최근에는 여러 개의 모형을 결합하는 앙상블 모형을 부도 예측에 적용해 보려는 연구가 큰 관심을 끌고 있다. 앙상블 모형은 개별 모형보다 더 좋은 성과를 내기 위해 여러 개의 분류기를 결합하는 것이다. 이와 같은 앙상블 분류기는 분류기의 일반화 성능을 개선하는 데 매우 유용한 것으로 알려져 있다. 본 논문은 부도 예측 모형의 성과 개선에 관한 연구이다. 이를 위해 사례 선택(Instance Selection)을 활용한 배깅(Bagging) 모형을 제안하였다. 사례 선택은 원 데이터에서 가장 대표성 있고 관련성 높은 데이터를 선택하고 예측 모형에 악영향을 줄 수 있는 불필요한 데이터를 제거하는 것으로 이를 통해 예측 성과 개선도 기대할 수 있다. 배깅은 학습데이터에 변화를 줌으로써 기저 분류기들을 다양화시키는 앙상블 기법으로 단순하면서도 성과가 매우 좋은 것으로 알려져 있다. 사례 선택과 배깅은 각각 모형의 성과를 개선시킬 수 있는 잠재력이 있지만 이들 두 기법의 결합에 관한 연구는 아직까지 없는 것이 현실이다. 본 연구에서는 부도 예측 모형의 성과를 개선하기 위해 사례 선택과 배깅을 연결하는 새로운 모형을 제안하였다. 최적의 사례 선택을 위해 유전자 알고리즘이 사용되었으며, 이를 통해 최적의 사례 선택 조합을 찾고 이 결과를 배깅 앙상블 모형에 전달하여 새로운 형태의 배깅 앙상블 모형을 구성하게 된다. 본 연구에서 제안한 새로운 앙상블 모형의 성과를 검증하기 위해 ROC 커브, AUC, 예측정확도 등과 같은 성과지표를 사용해 다양한 모형과 비교 분석해 보았다. 실제 기업데이터를 사용해 실험한 결과 본 논문에서 제안한 새로운 형태의 모형이 가장 좋은 성과를 보임을 알 수 있었다.

Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns

  • Liu, Chanjuan;Wu, Xinling;Wakil, Karzan;Jermsittiparsert, Kittisak;Ho, Lanh Si;Alabduljabbar, Hisham;Alaskar, Abdulaziz;Alrshoudi, Fahed;Alyousef, Rayed;Mohamed, Abdeliazim Mustafa
    • Steel and Composite Structures
    • /
    • 제34권5호
    • /
    • pp.743-767
    • /
    • 2020
  • Due to the impressive flexural performance, enhanced compressive strength and more constrained crack propagation, Fibre-reinforced concrete (FRC) have been widely employed in the construction application. Majority of experimental studies have focused on the seismic behavior of FRC columns. Based on the valid experimental data obtained from the previous studies, the current study has evaluated the seismic response and compressive strength of FRC rectangular columns while following hybrid metaheuristic techniques. Due to the non-linearity of seismic data, Adaptive neuro-fuzzy inference system (ANFIS) has been incorporated with metaheuristic algorithms. 317 different datasets from FRC column tests has been applied as one database in order to determine the most influential factor on the ultimate strengths of FRC rectangular columns subjected to the simulated seismic loading. ANFIS has been used with the incorporation of Particle Swarm Optimization (PSO) and Genetic algorithm (GA). For the analysis of the attained results, Extreme learning machine (ELM) as an authentic prediction method has been concurrently used. The variable selection procedure is to choose the most dominant parameters affecting the ultimate strengths of FRC rectangular columns subjected to simulated seismic loading. Accordingly, the results have shown that ANFIS-PSO has successfully predicted the seismic lateral load with R2 = 0.857 and 0.902 for the test and train phase, respectively, nominated as the lateral load prediction estimator. On the other hand, in case of compressive strength prediction, ELM is to predict the compressive strength with R2 = 0.657 and 0.862 for test and train phase, respectively. The results have shown that the seismic lateral force trend is more predictable than the compressive strength of FRC rectangular columns, in which the best results belong to the lateral force prediction. Compressive strength prediction has illustrated a significant deviation above 40 Mpa which could be related to the considerable non-linearity and possible empirical shortcomings. Finally, employing ANFIS-GA and ANFIS-PSO techniques to evaluate the seismic response of FRC are a promising reliable approach to be replaced for high cost and time-consuming experimental tests.

전통시장 지원에 대한 지각된 혜택과 비용이 관계품질과 지지에 미치는 영향 (Effects of Perceived Benefits and Costs of Traditional Market Support on Relationship Quality and Support)

  • 서정석;양재장;이용기
    • 유통과학연구
    • /
    • 제12권12호
    • /
    • pp.43-54
    • /
    • 2014
  • Purpose - This study examines how perceived benefits and costs of traditional market support affect relationship quality and support for a marketeer. In addition, it investigates whether support for traditional market aid programs leads to support for the government. The author developed a structural model comprising several variables, in which perceived benefits and costs comprising economic, social, and environmental costs were proposed, to affect the relationship quality (satisfaction and trust) of traditional market aid programs and the government. Consequently, marketeers satisfied and trusted by traditional market aid programs and the government would support the traditional market aid program, resulting in higher support for the government. The model proposed that customer satisfaction would improve customer loyalty and business performance. Thus, the relationship quality (satisfaction and trust) of the traditional market aid program and government was proposed as a core mediating variable between perceived benefits and costs and support. Research design, data, and methodology - To analyze the proposed model, this study investigates the scenario with a traditional marketeer. Data were collected from 331 respondents, and analyzed with SPSS/PC 18.0 and AMOS 18.0. To test the unidimensionality and nomological validity of the measures of each construct, we employed a scale refinement procedure. The result of the reliability test with Cronbach's and confirmatory factor analysis warranted unidimensionality of the measures for each construct. In addition, nomological validity of the measures was warranted from the result of correlation analysis. Results - First, perceived benefit affects the relationship quality of traditional market aid programs and government. Second, perceived costs affect the satisfaction of traditional market aid programs and government. Third, the relationship quality of a traditional market aid program affects the support of a traditional market aid program, and the relationship quality of government affects the support of government. Finally, the support of traditional market aid program affects support of government. The results confirm the findings of previous studies that local development positively influences support, based on the social exchange theory. Conclusions - The theoretical and managerial contributions of this study are as follows. First, it is the first such study, and defines mediating variables, analyzing relationship quality (satisfaction and trust) between perceived benefits and costs and support for the traditional market industry. Further, it investigates the structural relationships between them with the AMOS program. Second, while most previous studies investigating the relationship between similar variables and those of the present study analyzed how perceived benefits and costs influenced support, this study identified the transfer relationship between the support for traditional market programs and support for the government. This study confirms that support for traditional market aid program increases support for the government. Therefore, government policy makers for traditional market aid programs should explain to marketeers the benefits and costs of traditional market development in terms of economic, social, and environmental factors. At the end, limitations, further research directions, and implications are suggested.