• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2006년도 춘계학술대회
• /
• pp.87-109
• /
• 2006

The purpose of this paper is to examine the present performance evaluation methods and to make Monte Carlo Simulation Model for the IT-based Government innovation project. It is suggested the proper ways in applying of Monte Carlo Simulation Model by integration of present evaluation methods. It develops the theoretical framework for this paper, examining the existing literature on proposing an approach to the key concepts of the economic impact analysis methods. It examines the actual conditions of performance evaluation focusing on the It-based Government Innovation project. It considers how the simulation model is applied to the performance management in the public innovation project focusing on the framework, process and procedure of performance management.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.49-54
• /
• 1998

This paper describes a simulation model to analyze the dynamic performance of Unified Power Flow Controller, which adjust flexibly the active and reactive power flow through the ac transmission line. The basic operation was analyzed in detail using equivalent circuits and the design of control system was developed using vector control method. A simulation model with EMTP code was conceived to evaluate the performance of the Unified power Flow Controller. The simulation results show that the developed simulation model is very effective to analyze the dynamic performance of the Unified Power Flow Controller.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.21-29
• /
• 2010

본 연구는 시뮬레이션 방법을 이용한 자동차용 열 수축 튜브 생산 공정을 가상의 생산 공정 모델로 구현하고, 구현된 모델을 기반으로 열 수축 튜브 생산 공정을 분석하는 연구이다. 자동차용 열 수축 튜브 생산 공정을 분석하기 위해서 공정별로 생성되는 데이터를 수집하고, 수집된 데이터 분석을 통한 자동차용 열 수축 튜브 생산 공정을 분석할 수 있는 가상의 생산 공정 모델을 구현하였다. 구현된 모델을 통해 공정 내에서 발생되는 병목현상 파악 및 원인분석, 공정별 사이클 타임, 부품 생산량 등을 산정함으로써 현 공정 분석 및 개선방안을 모색할 수 있어 기업의 생산 공정관리 효율성을 높일 수 있다.

• 한국시뮬레이션학회논문지
• /
• 제26권3호
• /
• pp.13-22
• /
• 2017

본 연구는 시뮬레이션을 진행하면서 그 결과를 실시간으로 시각화하는 경우에 파이프라이닝 병렬처리 기법을 적용하여 성능을 개선할 수 있음을 보인다. 일반적으로 실시간 시각화를 포함한 시뮬레이션에서는 모델을 실행하는 프로세스와, 시뮬레이션 결과를 시각화 도구로 전송하는 프로세스, 결과를 받아서 시각화 하는 3개의 프로세스가 있다. 만약 이 프로세스들을 직렬화해서 실행하면 전체 실행시간이 매우 길어져서 시각화의 성능이 저하될 수밖에 없다. 본 연구에서는 기존의 직렬 방식 대신에 파이프라이닝 병렬처리 기법을 적용하여 성능을 개선하고자 한다. 추가적으로 각 프로세스에 다중 스레드 기능을 더하여 더 큰 성능의 개선이 있음을 보인다. 이를 위해 본 논문은 제안된 기법에 대한 이론적 성능모델을 세우고 최대, 최소 성능 향상 조건을 이론적으로 해석하였으며 모의실험하였다. 이 이론을 바탕으로 실시간으로 시각화하는 실시간 공중전 시뮬레이션에 적용한 결과 기존의 직렬화된 실행 성능보다 제안된 이론을 적용한 후의 실행 성능이 크게 향상되었음을 보였다.

• 성인간호학회지
• /
• 제25권2호
• /
• pp.170-182
• /
• 2013

Purpose: This study investigated the effectiveness of simulation training with a hybrid model of student nurses' performance ability and reported self confidence. Methods: A nonequivalent control group with pre-posttest was designed. Data collection was done during the first semester in 2012 at a college of nursing in Seoul. Nursing performance ability and reported self confidence related to taking care of patients with urinary problems were evaluated. The treatment group (n=96) received simulation training of a catheterization procedure with a hybrid model involving standardized patients and a mannequin. Nursing students in the comparison group (n=84) did not receive the simulation training but would receive it prior to their next clinical practicum's. Results: The treatment group showed a significantly higher performance ability and reported self confidence than that of the comparison group. The perceived helpfulness and contentment of the simulation training in experimental group was high. Conclusion: The findings of this study demonstrated that simulation with a hybrid model was effective in teaching skills prior to the clinical experience which suggests that skill development is not dependent on the actual clinical situation. Nurse educators should consider simulation training as a tool beyond that of clinical practicum.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.816-819
• /
• 1996

This paper focuses on development of simulation model for SAE J1850 and performance evaluation of a J1850 network. The simulation model has been developed by using discrete event simulation language. SAE J1850 is one of Class B network protocol for general data sharing applications. Through numerous simulation experiments, several important performance factors such as the probability of a successful transmission, average queue delay, and throughput have been evaluated.

• 한국시뮬레이션학회논문지
• /
• 제12권4호
• /
• pp.83-94
• /
• 2003

Managing a call center is a complex and diverse challenge. Call center becomes a very important contact point and a data ware house for successful CRM. Improving performance of call center is critical and valuable for providing better service. In this study we applied forecasting technique to estimate incoming calls and ProModel based simulation model to enhance performance of a mobile telecommunication company's call center. The simulation study shows reduction in managing cost and better customer's satisfaction.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.513-520
• /
• 2004

A steady-state/transient performance simulation model was newly developed for the propulsion system of the CRW (Canard Rotor Wing) type UAV (Unmanned Aerial Vehicle) during flight mode transition. The CRW type UAV has a new concept RPV (Remotely Piloted Vehicle) which can fly at two flight modes such as the take-off/landing and low speed forward flight mode using the rotary wing driven by engine bypass exhaust gas and the high speed forward flight mode using the stopped wing and main engine thrust. The propulsion system of the CRW type UAV consists of the main engine system and the duct system. The flight vehicle may generally select a proper type and specific engine with acceptable thrust level to meet the flight mission in the propulsion system design phase. In this study, a turbojet engine with one spool was selected by decision of the vehicle system designer, and the duct system is composed of main duct, rotor duct, master valve, rotor tip-jet nozzles, and variable area main nozzle. In order to establish the safe flight mode transition region of the propulsion system, steady-state and transient performance simulation should be needed. Using this simulation model, the optimal fuel flow schedules were obtained to keep the proper surge margin and the turbine inlet temperature limitation through steady-state and transient performance estimation. Furthermore, these analysis results will be used to the control optimization of the propulsion system, later. In the transient performance model, ICV (Inter-Component Volume) model was used. The performance analysis using the developed models was performed at various flight conditions and fuel flow schedules, and these results could set the safe flight mode transition region to satisfy the turbine inlet temperature overshoot limitation as well as the compressor surge margin. Because the engine performance simulation results without the duct system were well agreed with the engine manufacturer's data and the analysis results using a commercial program, it was confirmed that the validity of the proposed performance model was verified. However, the propulsion system performance model including the duct system will be compared with experimental measuring data, later.

• 제어로봇시스템학회논문지
• /
• 제2권3호
• /
• pp.209-219
• /
• 1996

Fieldbus provides a real-time data communication among field devices in the process control and manufacturing automation systems. In this paper, a Petri Net model of the 1993 draft of IEC/ISA fieldbus which is proposed as an international standard of fieldbus network is developed. Based on the Petri Net model, discrete-event simulation model of IEC/ISA fieldbus network is developed. This paper evaluates the network induced delay in the data link layer of IEC/ISA fieldbus using the simulation model. In addition, an integrated discrete-event/continuous-time simulation model of fieldbus system and distributed control system is developed. This paper investigates the real-time data processing capability of IEC/ISA fieldbus and the effect of network-induced delay to the performance of control system.

• Agricultural and Biosystems Engineering
• /
• 제4권1호
• /
• pp.34-38
• /
• 2003

A mathematical model was developed for estimating the mechanical interrelation between characteristics of soil and main design factors of a tracked vehicle, and predicting the tractive performance of the tracked vehicle. Based on the mathematical model, a computer simulation program (TPPMTV) was developed in the study. The model considered the continuous change in tension for the whole track of a tracked vehicle, the analysis of shape and tension of the track segment between sprocket and first roadwheel, and the side thrust on both sides of grouser by the active earth pressure theory in predicting the tractive performance of a tracked vehicle. Also, the model contained not only sinkage depth of the track but the pressure distribution under the track in analyzing the side thrust. The effectiveness of the developed model was verified by performing the draw bar pull tests with a tracked vehicle reconstructed for test in loam soil with moisture content of 18.92％. The predicted drawbar pulls by the model were well matched to the measured ones. Such results implied that the model developed in the study could estimate the drawbar pulls well at various soil conditions, and would be very useful as a simulation tool for designing a tracked vehicle and predicting its tractive performance.