• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2107-2124
• /
• 2013

The inspections that are being done on current bridges in our country are made to go through a process of being recorded on the management system and then converted by the computer. This has deteriorated the credibility of manual-analog types of data, inefficient care of information, and produced potential problems of the structures of bridges through subjective evaluations. In order to solve these troubles, this research has aimed at effectiveness, management, and convenience so that the inspector at the actual scene of the bridge structures will be able to achieve the primary purpose of infrastructure safety through precise supervision. To assist this, this study has suggested a state of the art IT intellectual management system that has applied RFID. This system has been designed to decrease the inspecting time on the actual scene, which will provide more time for efficient inspection and by using the converted DB, managing and utilizing high quality data will come naturally and through the objective evaluation, it will be possible to make exact judgments of the structures of the bridge. Also, regardless of the location, it has been found that the work performance was excellent through highly effective management.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.181-187
• /
• 2006

This paper is proposed to a solar cell power system used in fire emergency equipment. Also it is designed with a high efficiency power converter in order to increase efficiency of power system. The controlling switches used in DC-DC booster chopper and DC-AC inverter are operated with soft switching, which is applied to resonant circuit method to reduce switching loss. The result is that the system gets to high efficiency. In this paper, A detection circuit of maximum power point of solar cell is described in this paper. And the performance evaluations for the photovoltaic power system of high efficiency are examined by the analysis of a new tracking controller with a maximum power $P_{max}$ detection of solar cell.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.974-987
• /
• 2018

This paper presents a novel and efficient data transmission scheme based on mobile edge computing for the massive IoT environments which should support various type of services and devices. Based on an accurate and precise synchronization process, it maximizes data transmission throughput, and consistently maintains a flow's latency. To this end, the proposed efficient software defined data transmission scheme (ESD-DTS) configures and utilizes synchronization zones in accordance with the 4 usage cases, which are end node-to-end node (EN-EN), end node-to-cloud network (EN-CN), end node-to-Internet node (EN-IN), and edge node-to-core node (EdN-CN); and it transmit the data by the required service attributes, which are divided into 3 groups (low-end group, medium-end group, and high-end group). In addition, the ESD-DTS provides a specific data transmission method, which is operated by a buffer threshold value, for the low-end group, and it effectively accommodates massive IT devices. By doing this, the proposed scheme not only supports a high, medium, and low quality of service, but also is complied with various 5G usage scenarios. The essential difference between the previous and the proposed scheme is that the existing schemes are used to handle each packet only to provide high quality and bandwidth, whereas the proposed scheme introduces synchronization zones for various type of services to manage the efficiency of each service flow. Performance evaluations show that the proposed scheme outperforms the previous schemes in terms of throughput, control message overhead, and latency. Therefore, the proposed ESD-DTS is very suitable for upcoming 5G networks in a variety of massive IoT environments with supporting mobile edge computing (MEC).

• Journal of Fashion Business
• /
• v.20 no.3
• /
• pp.17-29
• /
• 2016

To develop baseball catcher leg guards, 3-dimensional (3D) methodologies, which are 3D human body data, reverse engineering, modeling, and printing, optimized guard design for representative positions. Optimization was based on analysis of 3D body surface data and subjective evaluation using 3D printing products. Reverse engineering was used for analysis and modeling based on data in three postures: standing, $90^{\circ}$ knee flexion, and $120^{\circ}$ knee flexion. During knee flexion, vertical skin length increased, with the thigh and knee larger in anterior area compared to the horizontal dimension. Moreover, $120^{\circ}$ knee flexion posture had a high radius of curvature in knee movement. Therefore, guard designs were based on increasing rates of skin deformation and numerical values of radius of curvature. Guards were designed with 3-part zoning at the thigh, knee, and shin. Guards 1 and 2 had thigh and knee boundaries allowing vertical skin length deformation because the shape of thigh and knee significantly affects to its performance. Guard 2 was designed with a narrower thigh and wider knee area than guard 1. The guards were manufactured as full-scale products on a 3D printer. Both guards fit better in sitting than standing position, and guard 2 received better evaluations than guard 1. Additional modifications were made and an optimized version (guard 3) was tested. Guard 3 showed the best fit. A design approach based on 3D data effectively determines best fitting leg guards, and 3D printing technology can customize guard design through immediate feedback from a customer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.13-16
• /
• 2008

Solid oxide fuel cell(SOFC) is an electrochemical energy conversion system with high efficiency and low-emission of pollution. In order to reduce the operating temperature of SOFC system under $800^{\circ}C$, the thickness reduction of YSZ electrolyte to be as thin as possible, e.g., less than 10 ${\mu}m$ are considered with the microstructure control and optimum design of unit cell. Methods for reducing the thickness of YSZ electrolyte have been investigated in coin cell. Moreover, a large unit cell($8cm{\times}8cm$) for SOFC was fabricated using an anode-supported electrolyte assembly with a thinner electrolyte layer, which was prepared by a tape casting method with a co-sintering technique. we studied the design factors such as active layer, electrolyte thickness, cathode composition, etc,. by the coin type of unit cell ahead of the fabrication process of a large unit cell and also reviewed about the evaluation technique of a large size unit cell such as interconnect design, sealing materials and current collector and so forth. Electrochemical evaluations of the unit cells, including measurements such as power density and impedance, were performed and analyzed. Maximum power density and polarization impedance of coin cell were 0.34W/$cm^2$ and $0.45{\Omega}cm^2$ at $800^{\circ}C$, respectively. However, Maxium power density of a large unit cell($5cm{\times}5cm$) decreased to 0.21W/$cm^2$ at $800^{\circ}C$ due to the increase of ohmic resistance. However, It was found that the potential value of a large unit cell loaded by 0.22A/$cm^2$ showed 0.76V at 100hrs without the degradation of unit cell.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.52-60
• /
• 2015

Nuclear power plant contain many dissimilar metal welds that connect carbon steel components with stainless steel pipes using alloy600 welding materials. Primary water stress corrosion cracks at dissimilar metal welds have been continuously reported around the world. In periodic integrity evaluations, dissimilar metal welds are examined using a generic ultrasonic testing procedure, KPD-UT-10. In this procedure, the gap between the probe and examination surface is limited to 1/32 inch (0.8mm). It is not easy to test some dissimilar metal welds in Korean plants applying ordinary technology because of their tapered shapes and irregular surface conditions. This paper introduces a method for applying a flexible phased array technology to improve the reliability of ultrasonic testing results for various shapes and surface conditions. The artificial flaws in specimens with irregular surfaces were completely detected using the flexible phased array ultrasonic technology. Therefore, it can be said that the technology is applicable to field examination.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.3
• /
• pp.249-252
• /
• 1985

This study was conducted to evaluate the quality of dried persimmons of several varieties using the analysis of sugar contents by high-performance liquid chromatography, the texture profile analysis by instron texturemeter, and the sensory evaluation. Soluble sugars detected in dried persimmons were mainly glucose and fluctose. The nearly same amounts of glucose and fructose presented in the dried persimmons although there were some differences among varieties tested and sucrose was only little amounts. Namyang Susi was the highest in fracturability and hardness. Namyang Susi and Kojongsi were higher than other dried persimmons in all parametersr, but Hiratanenashi were low in all parameters comparactively. In the sensory evaluations, Hiratanenashi recorded the highest scores in all items and the next were Sangju Dungsi, Chungdo Bansi, Kojongsi and Namyang Susi in order.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3794-3803
• /
• 2000

In a Video-on-Demand system, admission control that is used to serve multimedia data efficiently has to be perfonned by an accurate grasp of the condition of surplus resources. Most of all. we need to adaptable admission control mechanism because the disk has irregular response time caused by external elements of disk, and also has high deviation of amount demanded. In previous admission control schemes, they determined whether a new user is granted or not through a theoretical value. Although they based on the measurement, they left much to be desired in dealing with the service state. Measurement ~based statistical admission control scheme, as we su~~ested in this research, perfonns 2 processes of off-line process and on-line process in real service environment. Through this processes, we can grasp the accurate resource state of system and adaptive!y detennine the admission according to circumstances. Therefore, it can guarantee both maximum resource utilization and QoS(Quality of Service). On performance evaluations, we show that the video server can utilize maximum resource utilization with QoS guarantee through precision of perfonnance by measurement and adaptable admission control according to the requested bandwidth.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.2
• /
• pp.139-144
• /
• 2010

Objective : We report our surgical experience in the treatment of 16 consecutive patients with benign craniovertebral junction (CVJ) tumor, observed from 2003 to 2008 at our department. Methods : We had treated 6 foramen magnum meningiomas, 6 cervicomedullary hemangioblastomas, 1 accessory nerve schwannoma, 1 hypoglossal nerve schwannoma, 1 C2 root schwannoma, and 1 cavernous hemangioma. Clinical results were evaluated by Karnofsky Performance Scale (KPS) and all patients underwent preoperative neuroradiological evaluation with computed tomography (CT) and magnetic resonance image (MRI). Angiography was performed in 15 patients and preoperative embolization was done in 2 patients. Results : Five far-lateral, 1 supracondylar and 10 midline suboccipital approaches were performed. Gross total removal was achieved in 15 cases (94%) and subtotal removal in 1 patient (6%). None of the patients required occipitocervical fusion. Radiological follow-up showed no recurrence in cases totally removed. Postoperative decrease of KPS scores was recorded in only 1 patient. The treatment of cervicomedullary solid hemangioblastoma presented particular issues : by preoperative embolization, we removed tumor totally without an excessive bleeding or brainstem injury. In one of foramen magnum meningioma, we carried out subtotal removal due to hard tumor consistency and encasement of neurovascular structures. Conclusion : The choice of surgical approaches and the extent of bone resection should be defined according to the location and size of individual tumors. Moreover, we emphasize that preoperative neuroradiological evaluations on presumptive tumor type could be helpful to the surgeon in tailoring the technique and providing the required exposure for different lesions, without unnecessary surgical steps.

• Nuclear Engineering and Technology
• /
• v.37 no.5
• /
• pp.479-490
• /
• 2005

The thermalhydraulic performance of a CANDU-6 reactor loaded with various CANFLEX fuel bundles is evaluated by the NUCIRC code, which is incorporated with recent models of pressure drop and critical heat flux (CHF) predictions based on high-pressure steam-water tests for the CANFLEX bundle as well as a 37-element bundle. The distributions of channel flow rate, channel exit quality, critical channel power (CCP), and critical power ratio (CPR) for the CANFLEX bundles (with natural or recycled uranium fuel) in the CANDU-6 reactor fuel channel are calculated by the code. The effects of axial and radial heat flux on CCP are evaluated by assuming that the recycled uranium fuel (CANFLEX-RU) has the same geometric data as the natural uranium fuel bundle (CANFLEX-NU), but a different power distribution due to different fuel composition and refueling scheme. In addition, the effects of pressure tube creep and bearing-pad height are examined by comparing various results of uncrept, and $3.3\%\;and\;5.1\%$ crept channels loaded with CANFLEX bundles with 1.4 mm or 1.7 mm high bearing-pads with those of the 37-element bundle. The distributions of the channel flow rate and CCP for the CANFLEX-NU or -RU bundle show a typical trend for a CANDU-6 reactor channel, and the CPRs are maintained above at least 1.444 (NU) or 1.455 (RU) in the uncrept channel. The enhanced CHF of the CANFLEX bundle (particularly with 1.7mm height bearing-pads) produces a higher thermal margin and considerably less sensitivity to CCP reduction due to the pressure tube creep than the 37-element bundle. The CCP enhancement due to the raised bearing-pads is estimated to be about $3\%\~5\%$ for the CANFLEX-NU and $2\%\~6\%$ for the CANFLEX-RU bundle, respectively.