• 한국재료학회지
• /
• 제21권4호
• /
• pp.196-201
• /
• 2011

It is known that the relative dielectric constant of insulating polyethylene matrix composites with conducting materials (such as carbon black and metal powder) increases as the conducting material content increases below the percolation threshold. Below the percolation threshold, dielectric properties show an ohmic behavior and their value is almost the same as that of the matrix. The change is very small, but its origin is not clear. In this paper, the dielectric properties of carbon black-filled polyethylene matrix composites are studied based on the effect medium approximation theory. Although there is a significant amount of literature on the calculation based on the theory of changing the parameters, an overall discussion taking into account the theory is required in order to explain the dielectric properties of the composites. Changes of dielectric properties and the temperature dependence of dielectric properties of the composites made of carbon particle and polyethylene below the percolation threshold for the volume fraction of carbon black have been discussed based on the theory. Above the percolation threshold, the composites are satisfied with the universal law of conductivity, whereas below the percolation threshold, they give the critical exponent of s = 1 for dielectric constant. The rate at which the percentages of both the dielectric constant and the dielectric loss factor for temperature increases with more volume fraction below the percolation threshold.

• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.329-336
• /
• 2014

The conductive polymer composites have attracted considerable attention in the field of industry due to their electrical properties. To understand electrical properties of the composites, their volume specific resistance was measured. Electrical conductivity results showed percolation phenomena. Percolation theories are frequently applied to describe the insulator-to-conductor transitions in the composites composed of conductive filler and insulating matrix. It was found that the percolation threshold strongly depends on the aspect ratio of filler particles. The critical concentration of percolation formed is defined as the percolation threshold. The purpose of this study was to examine electrical properties of the epoxy resins filled with nickel. The sample was prepared using vehicle such as epoxy resin replenished with nickel powder, and the evaluation on their practical use was performed in order to apply them to electric and electronic industry as well as general field. The volume specific resistance of epoxy resin composites was 4.666~13.074 when using nickel powder. Weight loss of the conductive composites took place at $350^{\circ}C{\sim}470^{\circ}C$.

• 한국재료학회지
• /
• 제25권3호
• /
• pp.119-124
• /
• 2015

This paper investigates the change of the percolation threshold in the carbon powder-filled polystyrene matrix composites based on the experimental results of changes in the resistivity and relative permittivity of the carbon powder filling, the electric field dependence of the current, and the critical exponent of conductivity. In this research, the percolation behavior, the critical exponent of resistivity, and electrical conduction mechanism of the carbon powder-filled polystyrene matrix composites are discussed based on a study of the overall change in the resistivity. It was found that the formation of infinite clusters is interrupted by a tunneling gap in the volume fraction of the carbon powder filling, where the change in the resistivity is extremely large. In addition, it was found that the critical exponent of conductivity for the universal law of conductivity is satisfied if the percolation threshold is estimated at the volume fraction of carbon powder where non-ohmic current behavior becomes ohmic. It was considered that the mechanism for changing the gaps between the carbon powder aggregates into ohmic contacts is identical to that of the connecting conducting phases above the percolation threshold in a random resister network system. The electric field dependence is discussed with a tunneling mechanism. It is concluded that the percolation threshold should be defined at this volume fraction (the second transition of resistivity for the carbon powder-filled polystyrene matrix composites) of carbon powder.

• 한국토양비료학회지
• /
• 제40권3호
• /
• pp.214-220
• /
• 2007

The effects of soil percolation rate on $CH_4$ and $N_2O$ emissions were investigated from paddy fields with different drainage systems. Subsurface tile drainage plot of soil percolation rate $11.9mm\;d^{-1}$ and non-subsurface drainage plots of soil percolation rate $7.4mm\;d^{-1}$ and $6.9mm\;d^{-1}$ were designed. The effects of rice straw application were measured at each drainage plots. The subsurface tile drainage plot of soil percolation rate $11.9mm\;d^{-1}$ showed the lower emission amount both of $CH_4$ and $N_2O$ among treatments. In the subsurface tile drainage plot of $11.9mm\;d^{-1}$ percolation rate, 46% of $CH_4$ and 33% of $N_2O$ emission amounts were reduced in comparison of non-subsurface drainage plot of $6.9mm\;d^{-1}$ percolation rate. With rice straw application, the $CH_4$ emission amount was 2.1 times to that from no-applied plot, the $N_2O$ emission amount was not affected by rice straw application.

• 한국시스템다이내믹스연구
• /
• 제6권1호
• /
• pp.33-70
• /
• 2005

This study explores the process of corporate corruption via a percolation-based system dynamics model. The preliminary model is an agent-based model constructed in the terms of the corruption networking between ego and other. In the model, the agents behave depending on percolation rules, which represent (1) passing on the corruption opportunities and (2) accepting it. To describe the percolation process in the networks, we develop a further complicated model by combining the basic model with the Bethe lattice. Through the complicated model, we suggest (1) the dynamics of the systemic corporate corruption, (2) 4 patterns of the corruption, and (3) the institutionalization of the corruption. These simulation results provide theoretical and practical implications.

• Carbon letters
• /
• 제15권2호
• /
• pp.117-124
• /
• 2014

Conductive polymer composites (CPCs) consist of a polymeric matrix and a conductive filler, for example, carbon black, carbon fibers, graphite or carbon nanotubes (CNTs). The critical amount of the electrically conductive filler necessary to build up a continuous conductive network, and accordingly, to make the material conductive; is referred to as the percolation threshold. From technical and economical viewpoints, it is desirable to decrease the conductive-filler percolation-threshold as much as possible. In this study, we investigated the effect of polymer/conductive-filler interactions, as well as the processing and morphological development of low-percolation-threshold (${\Phi}c$) conductive-polymer composites. The aim of the study was to produce conductive composites containing less multi-walled CNTs (MWCNTs) than required for pure polypropylene (PP) through two approaches: one using various mixing methods and the other using immiscible polymer blends. Variants of the conductive PP composite filled with MWCNT was prepared by dry mixing, melt mixing, mechanofusion, and compression molding. The percolation threshold (${\Phi}c$) of the MWCNT-PP composites was most successfully lowered using the mechanofusion process than with any other mixing method (2-5 wt%). The mechanofusion process was found to enhance formation of a percolation network structure, and to ensure a more uniform state of dispersion in the CPCs. The immiscible-polymer blends were prepared by melt mixing (internal mixer) poly(vinylidene fluoride) (PVDF, PP/PVDF, volume ratio 1:1) filled with MWCNT.

• 한국작물학회지
• /
• 제46권1호
• /
• pp.6-11
• /
• 2001

In this lysimeter experiment, temporal changes of water percolation rate, irrigation requirement and ${No}_3$－-N leaching were investigated under different cultural practices that were no-till direct seeding on flooded paddy (NTDSF), till direct seeding on flooded paddy (TDSF), and transplanting. The highest water percolation rate of 3,001 l/$m^2$ was measured in NTDSF. Others were 2,551 l/$m^2$ and 2,210 l/$m^2$ in TDSF and transplanting. Water percolation rate in NTDSF and TDSF was increased by 36% and 15% compared to transplanting. Water percolation rates in all cultural practices were increased remarkably from the reproductive growth stage and relatively large amount of water loss through percolation was measured even after the reproductive growth stage. A total irrigation requirement was 3,469 l/$m^2$ in NTDSF and 2,898 l/$m^2$ in TDSF. That was equivalent to 45% and 21 % of increase compared to 2,389 l/$m^2$ in transplanting. The largest ${No}_3$－-N leaching through the entire rice growing period was 701 mg/$m^2$ in NTDSF and was followed by 494 mg/$m^2$ in TDSF and 465 mg/$m^2$ in transplanting. The ratios to the total amount of ${No}_3$－-N leaching at the vegetative growth stage, reproductive growth stage and ripening stage were 31 %, 41 % and 28% in NTDSF; 21 %, 48% and 31 % in TDSF; and 18%, 48% and 35 % in transplanting.

• 한국방재학회 논문집
• /
• 제11권1호
• /
• pp.1-6
• /
• 2011

고강도 콘크리트의 폭렬현상을 억제하여 내화 성능을 개선하기 위한 방법으로 고온에서 수증기가 콘크리트 표면으로 이동할 수 있도록 경로를 제공하여 주는 섬유를 혼입하는 방안이 있다. 섬유를 혼입하여 콘크리트의 폭렬을 억제하는 방법은 고온에 의해 콘크리트 내부에서 용융되는 섬유에 의해 만들어지는 통로가 서로 연결되어 고압의 수증기를 콘크리트 외부로 이동시킬 수 있을 때 효과가 있다. 수증기가 배출될 통로를 형성하는 섬유의 연결성에 대한 percolation 이론을 섬유혼입 고강도 콘크리트의 내화실험 결과에 적용하였다. 본 연구에서는 percolation 이론과 섬유혼입 고강도 콘크리트의 폭렬 발생의 연관성을 분석하였고, 섬유혼입 고강도 콘크리트 가상 시편을 이용하여 내부 섬유 입자가 서로 연결되어 있는 것을 입체적으로 구현하고 일정 부피비의 섬유가 혼입되었을 때 수증기 배출 통로가 확보되는 것을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.186-186
• /
• 2002

• 폴리머
• /
• 제27권3호
• /
• pp.201-209
• /
• 2003

나일론의 종류에 따른 분쇄형 탄소 섬유/나일론 복합재료의 직류 및 교류 전도도, 그리고 전자기파 차폐 효율을 조사하였다. 탄소 섬유의 함량이 약 7 vol%에서 전도도가 급격하게 증가하는 percolation 전이가 관찰되었다. 나일론 46을 기저 수지로 하였을 경우 더욱 높은 전기 전도도를 나타냈으며, 계면 결합제의 적용 여부에 따라 전도도의 차이가 발생하였다. 온도증가에 따라 전도도가 증가하는 negative temperature coefficient 현상을 나타냈으며, percolation 전후의 탄소 섬유 함량에서의 주파수에 따른 전도기구를 완화와 공진 현상으로 각각 달리 설명할 수 있었다. 회로망 분석기를 통하여 측정한 전자기파 차폐 효율은 전도도 및 탄소 섬유의 함량에 따라 증가하였으며, 높은 전도도 영역에서의 전자기파 차폐 효율은 반사에 의한 차폐가 지배적이었다.