• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.111-116
• /
• 2012

This study investigates the complete removal of nitrate and the recovery of valuable ammonium salt by the combination of nanoscale zero-valent iron (NZVI) and a membrane contactor system. The NZVI used for the experiments was prepared by chemical reduction without a stabilizing agent. The main end-product of nitrate reduction by NZVI was ammonia, and the solution pH was stably maintained around 10.5. Effective removal of ammonia was possible with the polytetrafluoroethylene membrane contactor system in all tested conditions. Among the various operation parameters including influent pH, concentration, temperature, and contact time, contact time and solution pH showed significant effects on the ammonia removal mechanism. Also, the osmotic distillation phenomena that deteriorate the mass transfer efficiency could be minimized by pre-heating the influent wastewater. The ammonia removal rate could be maximized by optimizing operation conditions and changing the membrane configuration. The combination of NZVI and the membrane contactor system could be a solution for nitrate removal and the recovery of valuable products.

• 소음진동
• /
• 제4권2호
• /
• pp.231-238
• /
• 1994

This paper presents an experimental method to find the vibrational transmission characteristics of structures by using the structural intensity method which is used as the important techniques of active vibration control method. Experimental results are obtained from measurements performed on a structure beam by 2, 3 and 4 position linear accelerometr array (2, 3 and 4 structural intensity : 2, 3 and 4 S.I.) methods at near and farfield conditions. These results are compared with the measurement values of conventional power flow measurement method called input power measurement in order to verify the accuracy of structural intensity methods. To minimize the errors associated with 2, 3 and 4 S.I. methods, the measurement locations were selected by the result of modal analysis and the averaged data by the inter-change of accelerometer array was utilized. In 3 and 4 S.I. methods measured wavenumber instead of theoretical wavenumber was used. This paper shows that measurements of bending wave power flow by using 2, 3 and 4 S.I. methods can give accurate values under general field conditions in structural beam and the accuracy of 2, 3 S.I. methods is higher than 4 S.I. methods. Finally, 2 position linear accelerometer array method is suggested as the practical structural intensity technique.

• 대한간호학회지
• /
• 제50권1호
• /
• pp.132-146
• /
• 2020

Purpose: The purpose of this study was to develop a new version of Spirituality Assessment Scale (N-SAS) and verify its reliability and validity. Methods: The total of 59 preliminary items for the N-SAS were selected through a literature review, two rounds of experts' content validation, cognitive interviews, and pre-tests. Verification of its reliability and validity was divided into two phases. In Phase I, questionnaires were collected from 219 adults. Reliability was tested using Cronbach's alpha, validity with item analysis, and exploratory factor analysis. In Phase II, questionnaires developed based on the results of Phase I were collected from 225 adults. Reliability was tested using Cronbach's alpha, validity with confirmatory factor analysis, and criterion validity. Results: The final version of the N-SAS comprised two dimensions (vertical and horizontal), four domains (relationship with God; meaning of life and self-integration; self-transcendence; and relationship with others, neighborhoods, and nature), and 44 items were identified. Total Cronbach's α was .97; those of each subscale ranged from .79 to .98. N-SAS scores were positively correlated with the scores of Howden's Spiritual Assessment Scale (r=.81, p<.001). Conclusion: Findings suggest that the N-SAS can be used to measure spirituality in adults. The use of N-SAS is expected to facilitate perceiving patient's spiritual needs and providing spiritual care.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.104-110
• /
• 2012

It is a common practice to design basement walls acting as a one-way slab or plate with idealized boundary conditions, resulting in potentially inefficient design. The walls are often supported by buttress columns and side walls in the vertical direction, thereby acting as a two-way slab. In this study, structural behavior of single-story, three-span basement wall subjected to lateral soil pressure was investigated. Three dimensional finite element analyses were conducted to determine the force distribution on the wall. Based on the numerical studies, a regression analysis was carried out to determine the design values of moments in vertical and horizontal directions as well as shear forces on the wall and design charts are developed. The proposed design method with accompanying design charts would enable practicing engineers to estimate member forces on the wall for preliminary design purpose without resorting to finite element analysis. Numerical examples demonstrated the applicability of the proposed method.

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.739-747
• /
• 2011

Objective: The present study evaluated information presentation methods applicable to a wearable Braille display in terms of performance and satisfaction measures. Background: A Braille display wearable at a finger can improve accessibility of information for the blind by presenting information in real time. Method: A Braille display with six pins operated by DC servomotors was developed to simulate four information presentation methods(active, stationary, simultaneous, and sequential methods). An evaluation experiment was conducted with 16 participants(8 normal and 8 blind participants) by using three objective measures(reaction time, RT, unit: sec; recognition time, CT, unit: sec; correct response percentage, CP) and two subjective measures(overall satisfaction, OS; perception easiness, PE) with a 7-point scale. Results: The average RTs and CTs of the active and stationary methods were significantly shorter than those of the simultaneous and sequential methods for the blind participants. Also, the average CPs, OSs, and PEs of the active and sequential methods were significantly higher than those of the stationary and simultaneous methods. Conclusion: The active and sequential methods were preferred to the other methods for the blind. Application: The performance characteristics identified in the present study for the four braille display methods can be utilized to develop an effective wearable Braille display system.

• Animal cells and systems
• /
• 제3권1호
• /
• pp.73-78
• /
• 1999

Although there are several methods for the preparation of mitochondrial DNA (mtDNA) from mammalian tissues, most are relatively long ultracentrifugation or manipulations by a small-scale method. We escribed a rapid method for large-scale extraction of mtDNA from human placental and horse liver tissues. The method is based on the preparation and homogenization of tissues, urification of crude mitochondria by differential centrifugations and isolation of mtDNA by alkaline Iysis. It was improved from Pre-existing methods by replacing some steps with simpler ones and discarding many others. This method gives a high yield of pure mtDNA(approximately 1-5mg from one placenta; ca. 400-600 g wet weight), depending on its sources (fresh tissue gave better results than frozen one). The resulting mtDNA indicated that this method can yield mtDNA in sufficient purity and quantity to identify the direct restriction analysis on agarose gel, random-primed labeling as a probe, and end labeling. Therefore, the method is ideal for obtaining good mtDNA samples to conduct routine restriction fragment length polymorphism (RFLP) analyses of natural populations for genetic studies.

• Journal of Magnetics
• /
• 제14권1호
• /
• pp.18-22
• /
• 2009

The shape anisotropy effect of a giant magnetoresistance-spin valves (GMR-SV) device with a glass/NiO/NiFe/CoFe/Cu/CoFe/NiFe layered structure for use in the detection of magnetic property of molecules within a cell was investigated. The patterned device was given uniaxial anisotropy during the sputtering deposition and vacuum post-annealing, which was performed at $200^{\circ}C$ under a 300 Oe magnetic field. The pattern size of the device, which was prepared through the photolithography process, was $2{\times}15\;{\mu}m^2$. The experimental results confirmed that the best design for a GMR-SV device to be used as a biosensor is to have both the axis sensing current and the easy axis of the pinned NiO/NiFe/CoFe triple layer oriented in the direction of the device's width, while the easy axis of the free CoFe/NiFe bilayer should be pointed along the long axis of the device.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.895-910
• /
• 2013

The reflood test data from the rod bundle heat transfer (RBHT) test facility showed that the grids in the upper portion of the rod bundle could become wet well before the arrival of the quench front and that the sizes of liquid droplets downstream of a wet grid could not be predicted by the droplet breakup models for a dry grid. To investigate the water droplet generation from a wet grid spacer, a viscous linear temporal instability model of the water sheet issuing from the trailing edge of the grid with the surrounding steam up-flow is developed in this study. The Orr-Sommerfeld equations along with appropriate boundary conditions for the flow are solved using Chebyshev series expansions and the Tau-Galerkin projection method. The effects of several physical parameters on the water sheet oscillation are studied by determining the variation of the temporal growth rate with the wavenumber. It is found that a larger relative steam velocity to water velocity has a tendency to destabilize the water sheet with increased dynamic pressure. On the other hand, a larger ratio of steam boundary layer to the half water sheet thickness has a stabilizing effect on the water sheet oscillation. Droplet diameters downstream of the spacer grid predicted by the present model are found to compare reasonably well with the data obtained at the RBHT test facility as well as with other data recently reported in the literature.

• Journal of Communications and Networks
• /
• 제17권2호
• /
• pp.100-109
• /
• 2015

Mobile phone carriers face challenges from three synergistic dimensions: Wireless, social, and mobile. Despite significant advances that have been made about social networks and human mobility, respectively, our knowledge about the interplay between two layers remains largely limited, partly due to the difficulty in obtaining large-scale datasets that could offer at the same time social and mobile information across a substantial population over an extended period of time. In this paper, we take advantage of a massive, longitudinal mobile phone dataset that consists of human mobility and social network information simultaneously, allowing us to explore the impact of human mobility patterns on the underlying social network. We find that human mobility plays an important role in shaping both local and global structural properties of social network. In contrast to the lack of scale in social networks and human movements, we discovered a characteristic distance in physical space between 10 and 20 km that impacts both local clustering and modular structure in social network. We also find a surprising distinction in trajectory overlap that segments social ties into two categories. Our results are of fundamental relevance to quantitative studies of human behavior, and could serve as the basis of anchoring potential theoretical models of human behavior and building and developing new applications using social and mobile technologies.

• 천문학회보
• /
• 제36권1호
• /
• pp.87.2-87.2
• /
• 2011

We report our 110 ks Chandra observations of the supernova remnant (SNR) 0104-72.3 in the Small Magellanic Cloud (SMC). The X-ray morphology shows two prominent lobes along the northwest-southeast direction and a soft faint arc in the east. Previous low resolution X-ray images attributed the unresolved emission from the southeastern lobe to a Be/X-ray star. Our high resolution Chandra data clearly shows that this emission is diffuse, shock-heated plasma, with negligible X-ray emission from the Be star. The eastern arc is positionally coincident with a filament seen in optical and infrared observations. Its X-ray spectrum is well fit by plasma of normal SMC abundances, suggesting that it is from shocked ambient gas. The X-ray spectra of the lobes show overabundant Fe, which is interpreted as emission from the reverse-shocked Fe-rich ejecta. The overall spectral characteristics of the lobes and the arc are similar to those of Type Ia SNRs, and we propose that SNR 0104-72.3 is the first case for a robust candidate Type Ia SNR in the SMC. On the other hand, the remnant appears to be interacting with dense clouds toward the east and to be associated with a nearby star-forming region. These features are unusual for a standard Type Ia SNR. Our results suggest an intriguing possibility that the progenitor of SNR 0104-72.3 might have been a white dwarf of a relatively young population.