• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.382-398
• /
• 2017

This study was conducted to identify the potential of Quercus mongolica (QUM), Pinus densiflora (PID) and Pinus rigida (PIR) as a raw material for pellet production. Larix kaempferi (LAK), which has mostly been used for pellet production in Korea, was also used as a control. All specimens contained very minimal amounts of sulfur and chlorine. Ash content of LAK was the lowest, followed by PID, PIR and QUM. For the size distribution, the mass fraction between 0.42 mm and 0.25 mm was the highest in PIR. Most fuel characteristics of the produced wood pellets improved with the use of 12% moisture content (MC) particles and the increase of the ratio of length to diameter of a hole in flat-die (L/D ratio). When the MC, bulk density and durability of QUM, PID, PIR and LAK pellets was compared with the standards of the KFRI and ISO, the use of wood particles of 12% MC and flat-die with an L/D ratio of 5.00 for PID particles are suitable for high-quality pellets in the aspects of all fuel characteristics. For PIR and QUM, further work is needed to seek the optimum conditions for the production of high-quality and durable pellets.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.304-305
• /
• 2005

• New & Renewable Energy
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2022

This study aimed to determine the optimal conditions for fabricating pitch pine (PCP) and Mongolian oak (MOK) pellets using chestnut-shell tea waste (CSW) and castor oil (CSO) as additives. For pellets fabricated using a pilot-scale flat-die pellet mill, all moisture content (MC) was in line with A1 wood pellet standards for residential and small-scale commercial uses designated by the National Institute of Forest Science at the Republic of Korea (NIFOS), regardless of fabricating conditions; the durability of PCP pellets prepared using PCP particles with 10% MC, and CSW addition also satisfied these criteria. The moisture tolerance of PCP pellets improved with combination of 2 wt% CSW and 2-6 wt% CSO. Overall, use of 20 mesh CSW as an additive, PCP with 10% MC, and MOK with 12% MC was found to be optimal. Moreover, using CSO as an additive, high-quality PCP and MOK pellets can be fabricated by adjusting the particles to 12% MC. However, the durability of PCP and MOK pellets prepared using these conditions did not meet the wood pellet standards for residential and small-scale commercial use. Therefore, further research is needed to improve the durability of these pellets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.830-836
• /
• 2000

A participation scheme involving smallholder dairy farmers in improving dairy productivity through the use of local feeds, on-farm established feeds and crop residues was carried out in the Northeast, Thailand. At six milk collection centers, 63 farmers with 340 lactating cows participated in this research and demonstration of feed supplements. Farmers and cows were allotted to receive respective feed supplements: high-quality feed block (HQFB), high-quality feed pellet (HQFP), dried cassava leaf/cassava hay, dried leucaena leaf and cottonseed meal: 5% urea treated rice straw was fed as a source of roughage throughout the feeding period of the dry season. Trainings and workshops were organized by the researchers at the University, research station, demonstration sites and on-farms. Regular visits to the fartns by researchers and extension officers were made while discussions and demonstrations were performed in addition. Participating farmers also visited other farmers during the demonstration which offered a real practical perspective and farmer-to-farmer interaction. As a result of this participation and demonstration scheme, the farmers could learn more effectively and accepted the technology more readily, especially the practicality of the feed preparation, feed establishment, feeding method and feed reserve. Strategic supplementation of these feed supplements resulted in improving milk yield, milk quality, overall condition of the cows and higher income return through increased productivity and lower level use of concentrate to milk yield from 1:2 to 1:3 or lower. Based on this research and demonstration /participation scheme, all feed supplements enhanced productivity, however the establishment of cassava hay on fartns deserved more attention and warrants a wider developmental expansion among dairy farmers since it contained high rumen by-pass protein (tannin-protein complex) and could be easily produced and be sustainable on farms.

• Journal of Forest and Environmental Science
• /
• v.25 no.2
• /
• pp.127-130
• /
• 2009

This study has been carried out to investigate the characteristics of the commercial wood pellets such as moisture content, heating value, ash content, and chemical component. The wood pellets from national forestry cooperatives federation and China were evaluated to see if they can be 1st or 2nd class of Korea standard. Indonesian pellet was estimated to be a 3rd class because of the heating value and high ash content. It is considered that there is a quality difference in wood pellets in accordance with the production nations. It could be originated from the difference of raw materials produced in different region.

• Journal of Animal Science and Technology
• /
• v.63 no.3
• /
• pp.545-562
• /
• 2021

A 3 yr experiment was conducted to evaluate the influence of diet and feeding location on animal performance, carcass characteristics, whole blood counts, and internal parasite burden of lambs assigned to 1 of 4 treatments: 1) confinement fed 71% alfalfa, 18% barley pellet, 5% molasses, 0.013% Bovatec, 6.1% vitamin/mineral package diet (CALF), 2) confinement fed 60% barley, 26% alfalfa pellet, 4% molasses, 2.5% soybean-hi pro, 0.016% Bovatec, 7.4% vitamin/mineral package diet (CBAR), 3) field fed 71% alfalfa, 18% barley pellet, 5% molasses, 0.013% Bovatec, 6.1% vitamin/mineral package diet (FALF), and 4) field fed 60% barley, 26% alfalfa pellet, 4% molasses, 2.5% soybean-hi pro, 0.016% Bovatec, 7.4% vitamin/mineral package diet (FBAR). A year × location interaction was detected for ending body weight (BW), average daily gain (ADG), and dry matter intake (DMI); therefore results are presented by year. In all years, cost of gain and DMI were greater for CALF and FALF than for CBAR and FBAR feed treatments (p ≤ 0.03). In yr 2 and 3 field treatments had greater ending BW and ADG than confinement treatments. For all years, diet did not affect ending BW or ADG. In yr 1 dressing percent and rib eye area were greater for field finished lambs than confinement finished (p ≤ 0.02) and Warner-Bratzler shear force was greater for CALF and FALF (p = 0.03). In yr 2 lambs in FALF and FBAR treatments had greater leg scores and conformation than CALF and CBAR (p = 0.09). In yr 1, FALF had a greater small intestine total worm count than all other treatments. In yr 1, ending Trichostrongyle type egg counts were greater for FALF (p = 0.05). In yr 2, ending Nematodirus spp. egg counts were greater for FALF and lowest for CBAR (p < 0.01). Abomasum Teladorsagia circumcinta worm burden was greater in CALF than all other treatments (p = 0.07) in yr 2. While field finishing lambs with a grain- or forage-based diet we conclude that it is possible to produce a quality lamb product without adverse effects to animal performance, carcass quality or increasing parasite burdens.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.146-151
• /
• 2007

Resistant starch (RS) content, paste viscosity, water solubility and absorption index, bulk density, color, compression force, and bowl life of Goami flakes manufactured by extrusion process were determined to evaluate Goami (high fiber rice) as a food material. Various extrusion process conditions included barrel temperature (90, 110, $130^{\circ}C$) and moisture content (50, 55%). RS content in the extruded pellet and defatted flake ranged from $8.00{\sim}8.56%$ and $6.57{\sim}9.53%$ respectively. RS content increased as moisture increased from 50% to 55%. Peak viscosity, trough viscosity, final viscosity, and setback viscosity of the extruded pellet and defatted flake decreased with steeping for 1 hr, and the breakdown viscosity significantly increased. The water solubility and absorption index increased in the flake compared to Goami and extruded pellet. The water solubility index of the extruded pellet was lower than that of Goami, while its water absorption index was higher than Goami. The bulk density of the flake ranged from $0.35{\sim}0.44$ g/mL. The bowl life of the flake was $12.4{\sim}19.4$ min, which was longer than commercial breakfast cereals on the market.

• Fisheries and Aquatic Sciences
• /
• v.19 no.8
• /
• pp.32.1-32.6
• /
• 2016

A feeding trial was conducted to evaluate the effects of two different sizes of extruded pellets (EP) ($EP_1$ - 3 mm or $EP_2$ - 5 mm) and a moist pellet (MP) in olive flounder, Paralichthys olivaceus, reared in semi-recirculation system. A total of 450 fish with an average initial weight of $5.0{\pm}0.2g$ (mean ${\pm}$ SD) were fed one of the three experimental diets in triplicate groups. At the end of a 6-week feeding trial, weight gain, specific growth rate, and feed efficiency of fish fed EP diets were significantly higher than those of fish fed MP (P < 0.05). Water quality parameters like turbidity, total ammonia nitrogen, and total phosphorous from tanks of fish fed $EP_1$ and $EP_2$ were significantly lower than those from tanks of fish fed MP. Blood plasma glutamic oxaloacetic transaminase and glucose concentration were significantly higher in fish fed MP diet compared to fish fed EP diets (P < 0.05). Whole body crude protein contents in fish fed EP diets were higher than those from the fish fed MP diet. Whole body amino acid content like threonine, aspartic acid, serine, tyrosine, and cystine were found to be significantly higher in fish fed EP diets than those in fish fed MP diet. In considering overall performance of olive flounder, $EP_2$ diet could be recommended for the successful aquaculture of this important fish species.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.2
• /
• pp.139-143
• /
• 1995

Two hundred eighty weaned Targhee lambs were grazed on annual grass-subclover pastures for 84 d under continuous and rotational defoliation grazing system. At the end of the grazing season, twenty lambs weighing 44 kg were slaughtered directly off the pasture, whereas two groups of 20 lambs each were fed either a alfalfa pellet or a 50% alfalfa/50 concentrate pellet for additional 6 wk until they reached an average live weight of 50 kg. Carcass traits and loin chop palatability were compared. Lambs slaughtered directly off the pasture were lighter than desirable market weight and some lambs had less than adequate fat cover and approximately half of them were graded U.S. Good in quality. Overall conformation and leg muscling was inferior and loin chops were less tender, less juicy and less flavorful. The lambs on alfalfa pellets for 6 wk appeared to be ideal in terms of carcass quality (all Choice except one), fat cover and yield grade. They had better taste panel scores in all palatability traits than off-the-pasture lambs, and most loin chops were acceptable. The lambs on a 50% concentrate diet for 6 wk had a higher conformation score and a greater muscling in the legs. Loin chops had more marbling and better palatability than other groups. However, some lambs had an excessive fat cover and lower yield of retail cuts. It was concluded that additional feeding for 6 wk on alfalfa pellets until the live weight reached 50 kg(for Targhee lambs) was the best way of finishing lambs at the end of grazing season in the California rangeland.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.403-410
• /
• 2003

To enhance the performance of a rice seed pelleting machine and the quality of rice-seed pellets made, improvement of the rice seed pelleting machine developed previously(Park, 2002) was tried and its performance was evaluated. As compared with the previous pelleting machine, a feeding mechanism of pellet materials to the forming rolls was changed from screw conveyor to hydraulic cylinder for proper feeding, rings were installed among rows of semi-spherical forming grooves on the forming rolls for reducing pellet materials loss and seeds damage, and discharging air nozzles were added for complete discharging of the pellets made. Through performance tests, capacity, pelleting ratio, and seed loss ratio of the pelleting machine were investigated at the mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : 1, and rotating speeds of the forming rolls of 7 rpm, 10 rpm, and 13 rpm. As results of performance evaluation, pelleting ratios were in the range of 77 ∼ 89 ％, and maximum pelleting ratio increased by 18 % in comparison with that of the previous machine. Maximum capacity was about 110 kg/h(about 63,000 pellets/h), which was increased by 70 % in comparison with that of the previous machine. But, ratios of seed loss were in the range of 24 - 49 ％, which were not improved.