• Journal of Biosystems Engineering
• /
• v.30 no.1 s.108
• /
• pp.17-24
• /
• 2005

An efficient microbial control system was introduced into a garlic peeling system using pressurized water in order to improve the quality and the shelf-life of peeled garlic. High microbial density of the spoiled peeled garlic and the water used for peeling and washing indicated that an efficient microbial control system is necessary far the peeling system. Though Pseudomonas spp. and Penicillium spp. were closely related to the spoilage of peeled garlic, the spoilage of peeled garlic was thought to be caused mainly by nonspecific increase in microbial density. The shelf-life of the garlic peeled by pressurized water was longer than that of the garlic peeled by pressurized air, and the degree of damage had great effect on the shelf-life of peeled garlic. Ozonated water was effective in decreasing the microbial contamination and in increasing the shelf-life of peeled garlic. Based on the findings of the study, following improvements were made to the garlic peeling system using pressurized water; 1) the water circulation system was modified in order to completely separate the water for washing from the water for garlic peeling, 2) filtration and cooling equipments were introduced into the circulation system of the water for peeling, and 3) an ozone generator which could continuously supply ozonated water (dissolved ozone concentration of 0.4 ppm) was attached to the circulation system of the water for washing.

• Applied Microscopy
• /
• v.40 no.4
• /
• pp.245-251
• /
• 2010

In this study, we applied 15% glycolic acid peeling agent and 30% glycolic acid peeling agent to the dorsal skin of mice and analyzed the oil content, moisture content, and pH value of the skin before and after test using cutometer. Ultrastructure for changes in the epidermis of mice were observed under a dermoscope and a scanning electron microscope before and after test. When using 15% glycolic acid peeling agent, the changes of moisture content was measured 74.67 AU for the normal control group and 70.21 AU for the experimental group, the oil content was 13.49 mg/$cm^2$ for the normal control group before test and 8.25 mg/$cm^2$ after test, and the pH value was 6.70 and 5.36 before and after test, respectively. When using 30% glycolic acid peeling agent, the moisture content was measured 74.46 AU for the normal control group before test and 53.50 AU for the experimental group after test, the oil content was 13.82mg/$cm^2$ and 5.70 mg/$cm^2$ before and after test, and the pH value was 6.45 and 4.58 before and after test, respectively. As such, it was found that the changes of moisture and oil content on the skin rely on the concentration of peeling agent and the degree of exfoliation of keratin. The surface of stratum corneum of mice with application of 15% glycolic acid peeling agent was relatively smooth and the exposed cellular surface of keratinocyte had some wrinkles. The surface of stratum corneum of mice with application of 30% glycolic acid peeling agent was smooth. No wrinkles were observed under high-resolution scanning electron microscope.

• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.1
• /
• pp.38-43
• /
• 1998

This experiment was carried out to gather basic information for improvement of peeling methods in peony (Paeonia lactiflora) roots which have been used for medicinal resources in Korea. Drying time required was shortened in thin root. Optimum drying time after machine peeling appeared to be 20 hrs in 5 to 10mm of root diameter, 39 hrs in 10 to 15mm, 48 hrs in 15 to 20mm, 56 hrs in more than 20mm, but those of unpeeled roots took 11 hrs in 5mm of root diameter and 4 hrs in exposed parent material. Paeoniflorin content in dried roots after peeling was lower than that of unpeeled root. Paeoniflorin content in root below 5mm in diameter was highest (6.15 %) and that was decreased in the increased root diameter up to 20mm, but it was slightly increased in root greater than 20mm in diameter.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.2
• /
• pp.89-108
• /
• 1991

Organophosphorus pesticide residues such as Diazinon, Fenitrothion and EPN in apple and effect of storage peeling and washing on removal of the residues from apple soaked in 3 kinds of pesticides solutions for 20 seconds were studed with gas chromatography-nitrogen phosphorus detecter(GC-NPD). Result obtained are as follows : 1) Average concentrations of DiaEinon, Fenitrothion, and EPN detected in apple of control group were 0.022, 0.007 and 0.008 ppm respectively. 2) Decreasing rates of Diazinon on 7 th, 14 th, 21 st, 28 th, and 35 th day after soaking apple on the pesticide solution were 41.3% , 68.6% , 87.0%, 96.9% and 99.5% respectively. In case of Fenitrothion were 46.9%, 66.3%, 84.9%, 93.2% and 97.3% and EPN were 45.7 %, 76.2%, 85.4%, 95.7% and 99.4% respectively. 3) The removal rate of Diazinon, Fenitrothion and EPN by washing with water alone were 93.7%, 70.6% and 51.5% respectively, and 97.1% , 78.4% ailed 76.5% by washing with 0.2% detergent solution respectively. The results obtained in this study have show that 3 kinds of pesticides detected in app- les were below the Korean standard for residual pesticides and pesticides contaminated in apples were decreased in considerable degree by washing with water and 2% detergent solution and removed almost completely after storage for 35 days (5 weeks). Therefore, it would be concluded that washing and peeling will be the most effective way for safely because more than 90% of pesticide exist in peel.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.357-364
• /
• 2019

This study comparatively analyzed hair damage by hair bleach particles and identified three different bleach particle sizes using a scanning electron microscope (SEM). The powdered bleaching agents made of ammonium persulfate (APS) and potassium persulfate had particle sizes of $131{\mu}m$, $72{\mu}m$ and $48.8{\mu}m$. According to a hair damage test, cuticle lift-up or peeling hardly occurred when small bleach particles were used. In terms of hair color, the hair bleached with larger bleach particles was the darkest, while the hair bleached with small bleach particles was the brightest. The results found that for bleaching agents that are more effective in easing hair damage, those with little particles should be used. In addition, it appears that the selection of particles depending on the degree of hair bleaching would enhance bleaching effects and reduce hair damage. The above process is a way to get great results in selecting a bleaching agent. It is anticipated that hair damage could be reduced during hair bleaching based on the above results.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.117-125
• /
• 1981

The changes in chemical compositions of chestnuts were tested during processing in order to elucidate the effects of heat treatments such as boiling, steaming and roasting on the flesh compositions. The results obtained were as follows. 1. The chemical compositions of raw chestnuts were: moisture, 59-61%; total sugar, 24-27%; crude fat, 0.3%; crude fiber, 0.6-0.9%; ash, 1.0%; amino nitrogen, 0.3%; vitamin C, 20-22 mg%; and tannin, 40-48%. 2. The moisture contents were increased to 63.8% by the boiling and to 70.27% by the peeling and boiling from 59.41% of raw ones respectively, whereas decreased to 54.11% by the roasting. 3. Contents of crude protein were decreased to 8.04% by the peeling and boiling procedure from 8.72% of raw ones, and those of amino nitrogen also revealed a decreasing tendency by the heat treatments. However, no significant change was observed in crude fat content. 4. Total sugar contents were decreased by the peeling and boiling procedure approximately 3.0%, whereas reducing sugars were increased 2 to 3 times in the all treatments. 5. Vitamin C contents were decreased 72.0 to 78.0 % by the boiling procedure, 64.2% by the steaming, 51. 6% by the roasting as compared with the raw ones. Tannin contents were increased 11.0% by the boiling, and 46.0% by the roasting respectively, whereas decreased 22.0% by the peeling and boiling procedure. 6. The color was changed to brown with different degree, during the boiling, steaming and roasting procedure. The 0.1% solution of alum appeared to be effective in reducing the browning reaction during the heat treatments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.193-200
• /
• 2007

The spalling analysis of high strength concrete columns needs a very complex and difficult process accounting for peeling of cover concrete as well as thermal, thermo-stress and hygro-transfer phenomena. However, the study on the spalling analysis method is insufficient. The practical spalling analysis algorithm is developed in this study, which formulates a vapor pressure equation as the parameter of temperature and cover depth and uses the compatibility condition In results of the spalling analysis, as the concrete strength increases and the content of PP fiber decreases the degree of spalling increases. This shows a similar result as the previous experimental study. Therefore the developed algorithm suggested in this study is expected to be useful in predicting the spalling of high strength concrete columns.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2020

Recycling processes of spent copper wires cosisnt of several steps of cutting and chopping processes for peeling covering materials followed by gravity separation processes, where copper is recovered. Because copper thin wires could be lost during further recycling processes, the wire may need to be further treated. In the present study, the copper thin wire was treated with ball milling to prevent the loss. Since the aggregation of the copper wire could be formed by bending and entangling the copper wire each other, the degree of flexion of the copper wire was measured after ball milling. When the 0.5 cm and 3 cm copper wires were used, the 0.5 cm copper wire was not bent and the 3 cm copper wires were aggregated regardless of the ball addition. When the 1 cm and 2 cm copper wires were used, the degree of flexion was remarkable when the balls were added. In the tests using 2 cm copper wires, the aggregation ratio of the copper wire gradually increased with the amount of the 20 mm alumina ball, and when 200 ml of 30 mm alumina ball was used, the aggregation ratio increased to 89.29 %, but after increasing the ball amount further, the aggregation ratio decreased. Thus, it is expected that the loss of the copper wire could be reducedif when the copper thin wire is treated with ball milling by the aggregation of copper thin wires.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.1
• /
• pp.107-114
• /
• 2003

This study aims to find methods that prevents aging of buildings paint coating and that limits defects in construction. Defects in painting can occur in four stages: pure paint, during painting, after the paint coating has dried, and after some period of time has passed after coating. Paint may become bad due to precipitation of pigments, formation of membranes, and seeding during manufacturing. Therefore, it is important that the paint is well mixed and kept airtight at a cool, dark place. Indents, paint brush strokes, orange peel, separation of colors, and paint running and spreading during the paint work process can be prevented by using high quality materials and applying a high-level of construction method. After the paint coating has dried, boiling, yellowing, poor drying, poor bonding, and/or glen deficiency may occur. These are influenced by the levels of cleanness of the dried product, drying temperature and hydration. Then, when the coating has been left dried for some period of time, cracking, peeling, scaling, swelling, discoloring, and/or rusting may develop due to the ultraviolet and contaminants in the air. Since these defects occur due to inappropriate construction schedule and/or hot and humid condition, one must use weatherproof materials. Furthermore, poor paint color may be caused by contamination in the sample plate, discoloration, and/or discrepancies in colors which are due to material differences, level of glossiness, degree of dispersion, dual color property of metallic colors, precipitation of pigments, etc. One should achieve reduction in construction cost and effectiveness in paint work by limiting contaminations in the construction site and strictly observing to construction regulations.