• Journal of Biosystems Engineering
• /
• v.18 no.4
• /
• pp.351-357
• /
• 1993

Recently, a garlic peeler with high performance is being demanded due to increase of consumption of peeled garlic. Although the air type out of various types of garlic peelers is recommended to remove effectively skin of garlic, it has an important problem of large energy consumption. This study was performed to analyze performance of an air-type garlic peeler for its optimum design. Performance indices to represent performance of garlic peeler include peeling ratio, energy efficiency and peeling performance. The factors such as aperture of nozzle, angle and position of air injection, charge rate of garlic, peeling time and so on must be considered to design optimally an air-type garlic peeler.

• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.301-310
• /
• 2002

With a purpose to manufacture an onion peeler, the root cutting equipment of the onion could be attached to a prototype onion peeler was developed. Before the experiment, the distribution of the dimensions of the Korean native onion were measured. And some types of the blades to cut and remove the root of the onion were designed and such characteristics as feasible revolution, conveying speed, and power requirement were investigated. From the result of the test, the selected one among the various cutters was the wing type blade with the round blade to cut out the root and with the vertical blade to cut a circular line. The optimum operating conditions of the wing type blade were revealed the revolution with no load was at 630 rpm, and the conveying speed was 0.08 m/s. Under these conditions, the maximum torque was 5.25 kg·m and the power requirement was 33 W, respectively.

• Journal of Biosystems Engineering
• /
• v.22 no.3
• /
• pp.289-294
• /
• 1997

The chestnut is a well-known and important forest product in Korea. The annual production of chestnut is about 100, 000tons and its cultivating area is 80, 000ha. However, the peeling process of outer and inner skins of chestnut is very difficult due to hardness and adhesiveness of chestnut skin. The peeling process of chestnut was operated by manual work and the performance of chestnut peeling machine is very low. The purpose of this study is to develope the prototype of new chestnut peeling system. The hardness of chestnuts was tested with six different drying conditions and its range was from 949$g/mm^2$ to 2, 149$g/mm^2$. The hardness of chestnuts was decresed gradually during the drying process. The chestnut peeling Process includes sorting, storage, drying, outer skin cutting, flame peeling, continuous frictional skin peeling, and inner skin cutting operation. The developed chestnut peeling system consists of outer skin cutter, flame peeler, continuous frictional skin peeler and inner skin cutter. The system can peel domestic chestnuts at 150$kg/hr$ with peeling rate of 78%.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.438-444
• /
• 2006

This study was carried out to obtain fundamental data such as peeling efficiency and quality of potatoes and sweet potatoes peeled by hand, machine and alkali(NaOH). The weight loss by peeling was influenced by peeling methods. Weight losses by rotational brushing-type peeler showed the lowest value, 7.9% in potato, and 7.3% in sweet potato. Any significant differences in moisture content were not found in potatoes and sweet potatoes by peeling methods. The pH of potatoes and sweet potatoes just after peeling were 5.8-6.8 and 6.23-6.63, and decreased somewhat until 3 hrs after peeling. Hardness of potatoes and sweet potatoes peeled by hand with fruit knife were better than that of others. Depending upon the peeling method used the color and color differences undergo some changes in their color and browning. Color difference value of peeled potatoes by hand with a technical tools, and by mechanical peeler such as rotational cutting-type peeler and rotational brushing-type peeler showed just slightly. In particular, changes of rotor differences value of potatoes and sweet potatoes peeled by dipping with 10% NaOH solution at $100^{\circ}C$ was the highest in the samples peeled by NaOH.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.11 no.2
• /
• pp.107-112
• /
• 2006

• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.311-316
• /
• 2002

This study was carried out to investigate the optimum operating conditions of the air injection type onion peeling device which could be attached to a prototype onion peeler. An onion, stem and root was cut and some vertical line was dug in 1 mm depth on the skin, was put on the two parallel rollers. The diameters of the rollers were 105 mm and the ratio of peripheral velocity was 3:2, and moved by a geared motor. Air from the nozzle with high pressure and velocity was jetted to the rotating onion on the revolving rollers, and then the skin of the onion was stripped. On the test, the rolling characteristics of the experimental materials were measured. The effective peeling conditions were, the number of digging line on the skin of the onion was 4, and the air jet pressure was above 392.3 kPa(4.0 kg/$\textrm{cm}^2$) when the peripheral velocity was at 2.4 m/s. On these conditions, time requirement to peel an onion was less than 2 sec.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.573-578
• /
• 2002

양파박피기 개발을 목적으로 수행된 본 연구에서는 공정상 필요한 뿌리절단장치에 관하여 시험 분석하였다. 뿌리를 절단, 제거하는 데 적합한 칼날의 종류, 회전속도와 이송속도, 및 소요동력 등 제 특성을 구명하여 적절한 회전칼날을 제작 사용함으로써 능률 높은 양파박피기를 개발하고자 수행한 결과를 요약하면 다음과 같다. 1. 양날형, 축날형, 원추형, 및 원통형 등 직경 30 mm의 칼날을 제작하여 실험하였던 바, 양파의 뿌리절단에는 구부린 칼날로 파내기를 하고 수직칼날로 금긋기를 동시에 할 수 있는 양날형이 가장 좋은 것으로 나타났다. 2. 양파의 뿌리부가 100% 절단이 되고 소요동력이 낮으면서 절단시간을 단축할 수 있는 최적의 작동조건은 칼날의 무부하 회전수 630 rpm, 이송속도 0.08 m/s인 것으로 나타났고, 그때의 최대토크는 5.25 kg·cm이었으며 최대소요동력은 33W로 나타났다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.969-977
• /
• 2001

The purpose of this study was to investigate disinfection state and effective factors of utensils and equipments used to foodservice of elementary schools in Busan area, The questionnaire which was administered to 160 dietitians was used in this study as a survey method. The results were as follows. The disinfection method of tray was mainly used by electric gas. Table and other products of stainless steel sanitized by sodium hypochlorite and hot water, but above 51% of slicer. grinder and peeler were not sanitized after used. The products of wood and plastic also used mainly sodium hypochlorite and hot water as sanitizers. In disinfection time, knife, wood spoon and plastic products should be sanitized on demand, but 30.9~53.5% of this utensils except rice scoop were sanitized on demand that showed deficiency of cognition for sanitation. The disinfection of most of utensils and equipments was conducted every day, but food case, slicer, peeler, grinder and wood spoon showed lower disinfection frequency than other products, The method of disinfection was related to dietitians age and career number of total serving, duration of foodservice and serving place, The disinfection time was also affected by dietitians age and educational level, and serving place. The disinfection frequency was affected by number of employee, number of total serving and duration of foodservice. Therefore based on the results of this study, it should be given to the microbiological study on disinfection method of utensils such as slicer, grinder, peeler, large spoon, plastic prouducts and the dietitians sanitation training also should be conducted continuously.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.965-970
• /
• 2002

This study was conducted to investigate inhibition effect of sanitizers against E. coli and a hygienic condition on the surface of utensils and equipments which were used to food service. Samples swabbed using cotton were collected from the surface of stainless steel, wood and plastic utensils and equipments which were used to food service at four elementary schools in Busan and analyzed by measuring the total, coliform and Salmonella spp. count. Total plate counts were 10$^4$~10$^{5}$ CFU/100 cm$^2$ in most of utensils and equipments except plastic cutting board. There were lots of coliforms in slicer (2.8$\times$10$^1$CFU/100 cm$^2$) and peeler (1.1$\times$10$^1$CFU/100 cm$^2$). It was indicated that the sanitary condition of some utensils and equipments such as slicer and peeler should be improved promptly. To investigate inhibition effect of sanitizers against E. coli, the surface of utensils and equipments used in food service was treated at different concentration of sodium hypochlorite for 1 minute and 3 minutes, respectively. The plastic utensils and equipments were most effective aganist E. coli at 100 ppm sodium hypochlorite for 3 minutes. But the stainless steel and wood were most effective at 200 ppm sodium hypochlorite for 3 minutes. It was also treated with 70% ethyl alcohol for 10 seconds and 30 seconds, respectively. The stainless steel utensils and equipments were most effective aganist E. coli at 10 seconds, but plastic and wood were most effective at 30 seconds. Therefore, the results of this study indicated that standardization of disinfection method of utensils and equipments used in food service should be given and sanitation training for dietition should be conducted continuously.

• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.161-165
• /
• 2005

In this study, peeling test of the Altari radish on kimchi pre-processing system for mechanization was performed with the longitudinal plane peeling type with wider cutting blade than that of the peeled chip's. To determine the optimum cutter shape to match this plane peeling type, the peeling tests depending on variable cutting speed, rake angle and blade angle using the blade with thickness as 2 m and width as 50mm were performed, and the patterns of the peeled chips and peeling resistances were investigated. As the result of the tests, the rake angle of the blade with clean peeled surface of the Altari radish was over $45^{\circ}$, and the blade angle and rake angle with the minimum peeling resistance was $20^{\circ}\;and\;60^{\circ}$, respectively. The optimum peeling conditions were; the peeling speed 0.2m/s, blade angle $20^{\circ}$ and the rake angle $60^{\circ}$, and the peeling resistance of each blade was 15 N.