• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.631-637
• /
• 2010

In this paper, We propose a method of motion interpretation of pedestrian for active traffic signal control. We detect pedestrian object in a movie of crosswalk area by using the code book method and acquire contour information. To do this stage fast, we use parallel processing based on CUDA (Compute Unified Device Architecture). And we remove shadow which causes shape distortion of objects. Shadow removed object is judged by using the hilbert scan distance whether to human or noise. If the objects are judged as a human, we analyze pedestrian objects' motion, face area feature, waiting time to decide that they have intetion to across a crosswalk for pdestrians. Traffic signal can be controlled after judgement.

• Journal of Korean Society of Transportation
• /
• v.1 no.1
• /
• pp.10-27
• /
• 1983

In order to improve the traffic enviroments in the urban streets of Seoul, the computer controlled traffic signal system was installed on 45 intersections at 1980. Afterward, yearly expansion was done to the numbers of 132 intersections and 232 loop detectors. The problems of timing plans were discussed, mainly pedestrian crossing timing as well as the generations of split and offset. The broad urban streets more than 30m require long phasing time of pedestrians, even though the equivalent or correspondent traffic volume is rare. The configuration of computer system for traffic control was disscussed in terms of control strategy. An overview also given. The improvements were measured at every quater. The travel speed improved to 42%, delay time reduced to 41% and number of stops to 43% respectively.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.1
• /
• pp.33-42
• /
• 2020

In Integration Approach (IA)-based Pedestrian Dead Reckoning (PDR), it is important to detect the exact zero-velocity of the foot with an Inertial Measurement Unit (IMU). By detecting zero-velocity during the stance phase of the foot touching the ground and executing Zero-velocity UPdaTe (ZUPT) at the exact time, stable navigation information can be provided by the PDR. When the pace is fast, however, it is not easy to accurately detect the zero-velocity because of the small stance phase interval and the large signal variance of the corresponding interval. Incorrect zero-velcity detection greatly causes navigation errors of IA-based PDR. In this paper, we propose a method to detect the zero-velocity stably even at high speed by novel buffering of IMU's output data and signal processing of the buffer. And we design a PDR based on this. By analyzing the performance of the proposed Zero-Velocity Detection (ZVD) algorithm and ZVD-based PDR through experiemnts, we confirm that the proposed method can provide accurate navigation information of pedestrians such as firefighters in the indoor space.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.41-46
• /
• 2021

The number of big traffic accident cases of pedestrian death appeared to be minor, however compared to death rate in car to car accidents is very high and quite a few of the pedestrian death rates among all traffic accidents are counted to be almost 40%. Previous pedestrian safety studies were mostly aimed at reducing the degree of pedestrian injuries from a vehicle to pedestrian collision, and less at preventing a collision itself. This research was conducted with a method of using road facilities to prevent vehicles from rushing into the sidewalk. This research used one of the collision analyzing programs, called PC-Crash to simulate the vehicle rushing into the sidewalk. Based on the program, it could derive an optimal safe zone location where the pedestrian can wait for the pedestrian light safely. Also, changing road facilities such as pedestrian light pillars or signal controllers can widen 440% compared to the present safe zone. Accordingly, researchers have to consider a method to analyze and apply pedestrian safe zones along with road facilities location when designing a road.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.92-102
• /
• 2017

For an automotive surveillance radar system, fast-chirp train based FMCW (Frequency Modulated Continuous Wave) radar is a very effective method, because clutter and moving targets are easily separated in a 2D range-velocity map. However, pedestrians with low echo signals may be masked by strong clutter in actual field. To address this problem, we proposed in the previous work a clutter cancellation and moving target indication algorithm using the coherent phase method. In the present paper, we initially composed the test set-up using a 24 GHz FMCW transceiver and a real-time data logging board in order to verify this algorithm. Next, we created two indoor test environments consisting of moving human and stationary targets. It was found that pedestrians and strong clutter could be effectively separated when the proposed method is used. We also designed and implemented these algorithms in FPGA (Field Programmable Gate Array) in order to analyze the hardware and time complexities. The results demonstrated that the complexity overhead was nearly zero compared to when the typical method was used.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.181-190
• /
• 2008

This study intended to provide the inherent characteristics of weak pedestrian including walking speed and perception-reaction time and to propose pedestrian signal timing models considering those characteristics. To collect the relevant data, field studies were conducted in virtual crosswalk environments. Walking speed were found to be 0.63 m/s and 0.57 m/s for children and the elderly, respectively. However, the elderly had higher perception-reaction time than children. By considering these characteristics, two pedestrian signal timing models were developed. Sensitivity analysis results showed that the models can produce reasonable ranges of pedestrian signal time. The data in this paper can be used for future references, and the mobility of weak pedestrian may be improved by applying the models suggested in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.606-608
• /
• 2021

Humans and various devices are interconnected using the Internet of Things and are used in various ways. In this study, a synchronization control system with remote locations was constructed using ICT, and a signal system for pedestrians was implemented using the system. PLC circuits were used to implement controllers, through which wireless control signal transmission and reception, LED lamp emission control, and power control were performed. It was confirmed that signal synchronization from the main controller to the remote sub-controller was possible by establishing a controller and pedestrian traffic light system, and lamp signal synchronization of the pedestrian traffic light system installed on both sides of the road was implemented. As a result, it was confirmed that 1:1 remote control or 1:N remote group control was possible, and this result can be used in various fields.

• Journal of Power System Engineering
• /
• v.19 no.5
• /
• pp.25-31
• /
• 2015

This study deals with optimal conditions for design parameters of the multistage bollard with up and down installed on the street to protect pedestrians or stop cars. FE simulation and Taguchi method are used to achieve the optimization for the automatic multistage bollard to minimize effective stress caused by the external force. Thickness, height of stage 2, diameter and over-all height which affect its structural strength are chosen as design parameters. According to the experiments combined by orthogonal array, each of the effective stresses is evaluated. And the results are analyzed by using the signal to noise ratio concept of Taguchi method. From their results, the optimal combination of design parameters are proposed.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.8 no.2
• /
• pp.12-21
• /
• 2009

The purpose of this study is to suggest a scheme to provide children safer and more comfortable walking circumstances by survey current walking circumstances of school zone ways. First, to avoid pedestrian roads being interrupted and to expand waiting space near school zone ways, several measures are needed including fixing roads, using schools' unemployed spaces and building additional gateway. Second, pedestrian crossings in front of school gate should be located at least 23.16m away from the left side of the gate. Third, on narrow path which cross main streets, the interval of pedestrian signal should be extended as against of the moment. And traffic calming facilities should be built on accurate position. Fourth, to secure pedestrians' safety and field of view, trees lining streets and any obstacles located within 10m from bus stop sign should be removed. Finally, education system about school zone ways should be improved to help children get used to more complicated roads' conditions.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.699-709
• /
• 2018

With increasing traffic volumes and rising vehicle traffic, especially in cities, the number of pedestrian bridges has also increased significantly. Like all other structures, pedestrian bridges also suffer damage. In order to increase the safety of pedestrians, it is necessary to identify existing damage and to repair them to ensure the safety of the bridge structures. Owing to the shortcomings of local methods in identifying damage and in order to enhance the reliability of detection and identification of structural faults, signal methods have seen significant development in recent years. In this research, a new methodology, based on cone-shaped kernel distribution with a new damage index, has been used for damage detection in pedestrian truss bridges. To evaluate the proposed method, the numerical models of the Warren Type steel truss and the Arregar steel footbridge were used. Based on the results, the proposed method and damage index identified the damage and determined its location with a high degree of precision. Given the ease of use, the proposed method can be used to identify faults in pedestrian bridges.