• 헤리티지:역사와 과학
• /
• 제35권
• /
• pp.138-158
• /
• 2002

To compare and analyze technical system related to manufacturing of ironware during the period of the Three Kingdoms, an analysis was conducted on the minute system of metalwork, as study objects, of the remains of the Mt. Wolpyeong fortress wall in Daejeon in the period of capital during the era of the Three Kingdoms in the 5th century, the Sanwol-ri remains in the 6th century in Gunsan and the remains of ironware excavated from the great ancient tomb of Hwangnam of the Silla dynasty in the 5th century. The result of analysis shows that in the most of the casting products, the minute system of white cast iron were contained. While the iron part of decarbonization was in the system by casting as white cast iron in the central part, on the surface layer it was turned out that comparatively uniform 100% pearlite system of about 1~2mm degree was existing. The part of pearlite on the surface layer was caused by decarbonization, which appears in all the parts of blade front end and handle. Therefore, it was found that the iron part of decarbonization was manufactured by casting, and then was processed at the high temperature by decarbonization. For the products of forging, after processing the products on the basis of pure iron for materials, they manufactured the ironware that raises the strength by carbonizing that keeps carbon infiltrated on the necessary part, by the method of black smith welding that add pure iron to steel, or by varying the method of heat processing onto the part required of strength. Though limited, we could understand that the technical systems for manufacturing skill of ironware in the areas of Baekje and Silla were different each other. In the technical system for Hwangnam great ancient tomb in the Silla area, it is found that they had raised the strength on the necessary part by applying the steelmaking method of carbonizing in the last stage of production of products, in the meantime in Baekje area, it appears that they had produced steel in advance in the first stage of production of the products, and used the produced steel only to the necessary part.

• 대한토목학회논문집
• /
• 제31권2A호
• /
• pp.129-136
• /
• 2011

최근 대기오염 물질을 제거하기 위하여 $TiO_2$ 등의 광촉매 재료를 사용한 기능성콘크리트에 대한 연구가 활발히 이루어지고 있다. 이들 연구에서 $TiO_2$의 흡착은 콘크리트에 직접 혼합하거나, 현탁액을 표면에 직접 도포하는 방법을 사용하고 있다. 이 중 콘크리트에 $TiO_2$를 직접 혼합하는 방법은 $TiO_2$의 사용량에 비하여 효능이 떨어져 표면에 직접 도포하는 방법이 많이 이용된다. $TiO_2$의 표면도포는 광촉매의 활성화와 접착성 증대를 위하여 $400^{\circ}C$ 이상의 고온 열처리를 실시하게 되며, 이는 콘크리트 수화생성물의 탈수 수축으로 내부균열을 발생시키는 원인이 되기도 한다. 이에 이 연구에서는 $TiO_2$의 저온도포가 가능한 Sol-gel법으로 $TiO_2$를 제조하였으며 펄라이트 사용 경량골재콘크리트에 저온 고정화하여 $TiO_2$ 도포 성능을 평가하였다. 또한 펄라이트 입경을 2.5~5.0 mm와 5.0 mm이상으로 구분하여 펄라이트 입경, $TiO_2$ 혼입방법과 혼입률 및 시간경과에 따른 $CH_3CHO$ 제거 특성을 검토하였다. 실험결과, Sol-gel법으로 제조한 $TiO_2$를 $120^{\circ}C$에서 저온 도포할 때 XRF 정량분석에서 $TiO_2$ 38%, $SiO_2$ 29%, CaO 18% 순으로 나타나 $TiO_2$ 도포율은 높게 나타났다. 또한 펄라이트 입경 2.5~5.0 mm에서 $TiO_2$를 저온도포한 경량골재콘크리트의 $CH_3CHO$ 제거 특성은 Sol-gel법으로 제조된 $TiO_2$를 7% 표면 도포하였을 경우 94%로 나타나 10%를 혼입할 때 72%에 비해 약 20%정도 높게 나타났다. 또한 펄라이트 입경 5.0 mm이상에서 $TiO_2$를 10%로 치환하여 혼합하였을 경우 $CH_3CHO$ 제거율은 69%로 펄라이트 입경 2.5~5.0 mm에 대한 72%와 비슷하게 나타나 펄라이트 입경이 $CH_3CHO$ 제거율에 미치는 영향은 크지 않았다. 시간 경과에 따른 $CH_3CHO$ 제거 특성은 전 시험편의 10시간 평균 제거율이 20시간 전체 제거율의 84% 수준으로 나타나 반응 초기에 제거율이 높은 것으로 나타났다.

• 한국주조공학회지
• /
• 제10권1호
• /
• pp.64-70
• /
• 1990

In order to lower the cabon content of sintered products below the solubility of austenite, Fe-oxide was added to cast iron powder of which matrix was pearlite. And the effects of it on some sintering properties and mechanical properties were investigated. Roughly speaking, the linear shrinkage, density, and tensile strendth of sintered properties increased as the sintering temperature became higher, the size distribution of powder became finer, and the amount of Fe-oxide added became less. The maximum tensile strength of sintered products was $78㎏f/mm^2$ more or less, of which carbon content was 1.4% and sintering temperature was $1180^{\circ}C$.

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.164-169
• /
• 2007

Hydrogen induced cracking (HIC) was studied phenomenologically and the effect of microstructure on HIC was discussed for the steels having two different levels of nonmetallic inclusions. Steels having different microstructures were produced by thermomechanically controlled processes (TMCP) from two different heats which had the different level of nonmetallic inclusions. Ferrite/pearlite (F/P), ferrite/acicular ferrite (F/AF), ferrite/bainite (F/B) were three representative microstructures for all tested steels. For the steels with higher level of inclusions, permissible inclusion level for HIC not to develop was different according to steelmicrostructure. On the contrary, HIC occurred also at the martensite/austenite (M/A) constituents regardless of steel microstructure when they accumulated to a certain degree. It was proved that M/A constituents were easily embrittled by hydrogen atoms. Steels having F/AF is resistant to HIC at a given actual service condition since they covers a wide range of diffusible hydrogen content without developing HIC.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.75-81
• /
• 1998

We have studied internal quality including chemical compositions, microscopic structure and nonmetallic inclusion of test materials. We have analyzed tensile strength value, hardness value, impact value etc. In analyzing internal quality, all of the test materials showed typical ferrite+pearlite structure. But nonmetallic inclusion showed oxide and sulfide inclusions in medium carbon steels, and sulfide inclusion is S-free cutting steels. In ca+ S-free cutting steels, the calcium aluminate and sulfide complex inclusion had low-melting points as deformation of sulfide and oxide inclusion is existed. It was found that tensile strength and hardness give maximum value in medium carbon steels, where as minimum in Ca + -free cutting steels. But values of elongation, reduction of area impact are reverse. Fracture surface of impact specimen is ductile in free cutting steels but brittle in medium cabon steels.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.240-246
• /
• 1999

The effect of microstructure of gray cast iron disk was investigated by using a pad-on-disk type friction tester. Three different rotors with different microstructures were studied in this work. They showed a pearlitic matrix, a ferritic matrix, and a martensitic structure, respectively. All of them have graphite flakes in common. Drag tests at different pressure and speed conditions were carried out to study friction stability, temperature rise during drags. The rotor containing pearlitic matrix showed lower values of friction coefficient, small amount of temperature rise, and less fading. The results showed that gray cast iron disk containing pearlitic matrix has good friction characteristics.

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.81-86
• /
• 2004

The sulfide stress corrosion cracking (SSCC) resistance of API X70 grade steel weldment has been studied using SSCC test in NACE TM-O177 method A. Also, microstructures and hardness distribution of weldment was investigated. The microstructure of SAW joint composed ferrite, pearlite and some MA constituent. Instead of hardening in CGHAZ, softening on the HAZ near base metal occurred. The low carbon TMCP type steel used for SAW showed softening behaviour in the HAZ adjacent to base metal, which was known to be closely related with the SOHIC (stress oriented hydrogen induced cracking). The SSC testing revealed that the API X70 SAW weld was suitable for sour service, satisfying the NACE requirements. By suppressing softening in the ICHAZ region, the SSCC resistance of low carbon TMCP steel welded joints could be more improved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.85-90
• /
• 2001

The microstructure and mechanical property of 0.19C-1.17Cr steel were investigated with cold drawing. This commercial steel has the microstructure that is consist of ferrite and pearlite. The tensile and yield strength are increased as the reduction ratio of cold drawing is increased. It was clear that mechanical properties could be improved by combination of the heat treatments and reduction ratio. Yield strength. tensile strength, and impact value were formulated as a constitutive function of cold drawing ratio, respectively.

• 오토저널
• /
• 제13권2호
• /
• pp.103-111
• /
• 1991

To determine the effects of microstructure on the fatigue crack propagation behavior in SM45C steel, experimental investigations have been carried out with the specimens of different grain sizes and different spacings between the Fe$_{3}$C particles. Fatigue and tensile tests were conducted and the quantitative analysis of the relations between the threshold stress intensity range and grain size, interparticle spacing and yield stress were carried out. Some of the conclusions obtained are as follows; (1) .DELTA.K$_{th}$ was observed to increase with grain size and the spacing between the Fe3C particles. (2) In both pearlite and spheroidite microstructures, .DELTA.K$_{th}$ was increased when yield stress was decreased.sed.

• 대한기계학회논문집
• /
• 제5권2호
• /
• pp.110-121
• /
• 1981

In order to study on the fracture behavior and the fracture thoughness of combined structure, the specimens, structural steel (SM28C) and 6:4 brass are annealed for ductility and investigated for the befavior of fracture and the absorbed energy at the variation of the impact velocity. The results obtained by this study are as follows: (1)The maximum load increases with the impact velocity, but in the condition of constant impact velocity it decreases as the ductility increases. (2)The absorbed energy increases with the impact velocity, but in the condition of constant impact velocity it is constant as the ductility increases. (3)In the case of the combined structure of peralite and ferrite, the microcracks initiates and propagates mainly in the ferrite structure intergranular in accompany with the slip, and the slip concentration phenomena occur in the boundary of pearlite structure However, in case of the combined structure of .alpha. and ..betha. phase, the microcracks initiates and propagares mainly in the .alpha. phase intergranularly, and slip concentration phenomena not ocur in the boundary of .betha. phase.