• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.35-36
• /
• 2000

The luminescence behaviors of Yttrium niobate and Bi doped Yttrium niobate were investigated under UV and low voltage electron excitations and interpreted with the first-principle calculations. In the UV excitation and emission spectra of $YNbO_4$ and $YNbO_4:Bi$, we were able to separate host contribution and Bi contribution and found that the shift in emission peak to longer wavelength is mainly due to Bi contribution. Using density functional theory, the cluster calculations were carried out for both $YNbO_4$ and $YNbO_4:Bi$. From the calculated density of states, we were also able to explain the charge transfer gap in the host and the effect of Bi in the excitation and emission spectra theoretically.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.660-662
• /
• 2004

Cooling demand in Korea has increased constantly. Furthermore, an evaluation and savings of cooling demand has impacted on summer DSM and investment in Korea. Absorbed cooling system uses gas. It could achieve reductions in summer peak load and increase gas demand simultaneously. However its efficiency rate is lower than electric system. Gas cooling system uses separate meter. Therefore we could analyze monthly cooling demand and derive annual uses pattern. This paper analyzes demand pattern of gas cooling and its effects on electricity savings. Also this paper presents the course of policy in electricity sector on spreading of gas cooling measures.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3130-3139
• /
• 2022

Direct containment heating (DCH) is one of the potential factors leading to early containment failure. DCH is closely related to safety analysis and containment performance evaluation of nuclear power plants. In this study, a DCH prediction program was developed to analyze the DCH loads of containment vessel. The phenomenological model of debris dispersal, metal oxidation reaction, debris-atmospheric heat transfer and hydrogen jet burn was established. Code assessment was performed by comparing with several separate effect tests and integral effect tests. The comparison between the predicted results and experimental data shows that the program can predict the key parameters such as peak pressure, temperature, and hydrogen production in containment well, and for most comparisons the relative errors can be maintained within 20%. Among them, the prediction uncertainty of hydrogen production is slightly larger. The analysis shows that the main sources of the error are the difference of time scale and the oxidation of cavity debris.

• 암석학회지
• /
• 제3권3호
• /
• pp.196-219
• /
• 1994

Granulite complexes in northern (the Nangnim block), eastern (ther Kimchaek zone of the Macheonryong belt) and southern (separate windows among upper Proterozoic structure such as the Wonsan, Nampo and Haeju granulites) parts of the Northern Korea are studied. Multistage deformations, metamorphic and migmatitic events, and granite formations are recognized in these granulite complexes. Mineral thermobarometry and fluid inclusion investigationss are used to establish the P-T evolutionary trends during prograde and retrograde metamorphic events. The peak metamorphism of granulites is characterized by temperature near $800^{\circ}C$ and pressure near 5.5-6 kb. Retrograde evolution includes cooling at constant pressure or with variable pressure ranging up to 7-8 kb. This P-T change corresponds to the transition from high to moderate or low geothermal gradient. The subsequent cooling is ac-companied by significant decompression to 3-4 kb.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.85-92
• /
• 2018

수요관리를 통해 전기요금을 절감할 수 있다. 부하의 수요 관리 방법 중 하나로 ESS를 설치해 수요가 높은 시간대의 부하를 수요가 낮은 시간대로 옮기는 peak shifting을 사용함으로써 최대 부하를 낮추고 전력량 요금을 절감할 수 있다. 전기요금은 계약 용량 당 기본요금과 전력량 요금으로 이루어져있다. 전력량 요금을 최소화하기 위한 최적화 수행시 목적함수는 선형식으로 표현할 수 있으며, 기본 요금 최소화를 위한 목적함수는 이차식으로 표현할 수 있다. 선형식으로 표현된 목적함수에서는 ESS PCS(Power Conversion System)의 충, 방전 효율이 다른 경우를 다룰 수 없기 때문에 본 논문에서 충, 방전 효율이 다른 경우의 영향을 반영하고 혼합정수계획법(MILP, Mixed Integer Linear Programming)을 이용할 수 있는 정식을 제시하였다. 혼합정수계획법을 사용한 정식에서는 사전에 정해진 최대 부하 절감율에 대해 전기요금 최소화를 수행하게 되지만 최대 부하 절감과 전기요금 절감을 동시에 고려하기 위해서는 이차 계획법을 사용하는 것이 유용하다. 본 논문에서는 각 최적화 방법에 대한 장, 단점을 도시철도 변전소에 대한 시뮬레이션 결과를 정량적으로 비교분석하여 ESS 설비계획수립에 적합한 최적화 방법을 선택할 수 있는 근거를 제시하였다.

• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.1-16
• /
• 1996

본 논문에서는 동영상 부호화를 위하여 움직임 보상기법과 분할 대역 기법을 사용한 MCSBC 부호화 기법을 제안하였다. 또한 MCSBC에 관한 여러가지 문제들, 즉 각 분할 대역에의 움직임 보상 기법에 관한 문제, 각 분할 대역의 DCT 계수에 대한 효율적인 비트 할당등을 다루었다. MCSBC의 효율적인 부호화를 위하여 먼저 원신호에 대역 분할을 수행한 후, 움직임 보상 기법은 저대역의 영상 신호에만 적용하였고, 모든 대역에 이산 여현 변환(DCT)를 적용하였다. DCT가 적용된 블럭들은 각 대역 신호의 특징에 따라 최적화된 주사 방법 및 비트 할당을 사용하여 부호화한다. 이러한 MCSBC 기법은 고화질 TV 용 동영상에 적용하여 모의 실험을 수행하였다. 모의 실험 결과, 제안한 MCSBC 기법은 일반적인 움직임 보상 동영상 부호화 기법에 비하여 약 1.5dB의 성능향상을 확인할 수 있었다.

• The Korean Journal of Physiology
• /
• 제18권1호
• /
• pp.9-17
• /
• 1984

The second inward current $(i_{si})$ was studied by the two microelectrode voltage clamp technique in the sino-atrial node of the rabbit. The slow component $(i_{si,2})$ of the second inward current was sometimes identified and $i_{si}$ behaved as if it were a mixture of two currents. We analysed the $(i_{si,2})$ in relation to membrane potential and frequency of voltage clamp pulses. 1) Membrane was held at -40mV which was usually found to be zero current level. When depolarizing pulses were applied, the slow inward current $(i_{si})$ was activated. 2) It was shown that there are three categories of the $i_{si}$ activation by the low level of depolarizing clamp pulses. Moderately fast inward current with single component was developed in most cases in the presence of tetrodotoxin(TTX). But sometimes there was two separate components of $i_{si}$ activation in the peak level and the time course. Thirdly the only slow component of $i_{si}$ was found in rare cases. 3) The activation of $(i_{si,2})$ was dependent upon membrane potential. The $i_{si}$ shows two separate peaks during clamp depolarizations and higher clamp pulses lead to fusion of the peaks. 4) The $i_{si,2}$ activation showed that it decreased with repetitive clamp pulses and it was more evident in higher frequencies(2Hz)(negative staircase).

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.71-76
• /
• 2014

As the importance of transmission efficiency to reducing fuel consumption and conserving the environment rapidly increases, reducing the drag torque in an automotive wet clutch is emerging as an important issue in the automotive industry. The drag torque in a clutch occurs from viscous drag generated by automatic transmission fluid in the narrow gap between separate friction plates. In this study, the drag torques in an automotive wet clutch are investigated with respect to the angle and density of the grooves between separate friction plates by three-dimensional finite element simulation of a single set of wet clutch disks considering the two-phase flow of air and oil. The simulation results shows that the drag torque generally increases with the rotational speed to a critical point and then decreases at the high-speed regime. The grooves between the plates plays an important role in reducing the drag peak, and the inclined angle of the grooves affects the oil flow. The grooves with an angle of $50^{\circ}$ shows the lowest drag torques at both low and high speeds. The flow vectors inside the $50^{\circ}$ grooves shows clear evidence that the fluid flows out more easily from the grooves compared with the flow vectors inside grooves with lower angles. The simulation results shows that increasing the number of grooves (density of grooves) decreases the drag torque.

• 공학기술논문지
• /
• 제4권4호
• /
• pp.431-436
• /
• 2011

This study was carried out to reduce the problem during distillation process, which separate U, TRU (TRans Uranium) metal electro deposit, Cd and LiCl-KCl eutectic salt generating from LCC (Liquid Cadmium Cathode) electro winning process. The cadmium recovering apparatus was manufactured to separate for each metal using solid-liquid separation method. The apparatus consists of the first sieve for the separation of U and TRU metal electrodeposit, the second sieve for the separation of LiCl-KCl eutectic salt, cadmium collection basket, and a heating furnace. In addition, the size of each sieve is 2 mm to 3 mm. In this experiment, a metal wire was employed to replace TRU metal electrodeposit and U, which exist actually in a LCC crucible. In the solid state, The LiCl-KCl is separated at 340℃ at which the solid and the liquid of the remaining cadmium and LiCl-KCl eutectic salt coexists in each, after the metal wire separated at 500℃. As a result, it seems that it would be beneficial to set the processing condition in the distillation process with the additional treatment process of cadmium and LiCl-KCl eutectic salt.

• 대한화장품학회지
• /
• 제48권4호
• /
• pp.321-330
• /
• 2022

본 연구는 HPLC-PDA를 이용하여 화장품의 보존제 15 종, 자외선 차단제 2종 및 항산화제 1 종에 대해 신뢰성 있는 결과를 확보할 수 있는 최적의 다성분 동시분석법을 구축하고자 하였다. 이동상의 수소이온 농도(pH)가 분석성분의 산해리상수(pKa)에 영향을 주기 때문에 피크의 머무름 시간과 면적값 변화가 생기는 문제를 확인하였고, 이동상 조제시 0.1% H₃PO₄ 첨가량(mL)으로 pH를 조절하는 방법으로써 피크 분리조건을 확립하였다. 시험법의 유효성 검증 결과, 검량선의 직선성(R²)은 0.999 이상을 얻었으며 화장품 2 종(크림, 샴푸)에 대해 정확성은 87.9 ~ 101.1%, 정밀성은 0.1 ~ 7.6% 의 결과를 얻었다. 성분별로 검출한계(LOD)는 0.1 ~ 0.2 mg/kg, 정량한계(LOQ)는 2.0 ~ 4.0 mg/kg인 것으로 나타났다. 또한 합성보존제인 methylparaben과 차이점이 적어 HPLC에서 성분분리가 어려웠던 천연성분인 p-anisic acid를 동시에 분리할 수 있었다. 본 연구를 통해 화장품 중 사용상 제한이 필요한 성분들에 대한 품질관리 및 안전성 확보에 효과적으로 활용될 것이다.