• Geomechanics and Engineering
• /
• 제36권2호
• /
• pp.145-156
• /
• 2024

The mechanical properties of the concrete-frozen soil interface play a significant role in the stability and service performance of construction projects in cold regions. Current research mainly focuses on the precast concrete-frozen soil interface, with limited consideration for the more realistic cast-in-place concrete-frozen soil interface. The two construction methods result in completely different contact surface morphologies and exhibit significant differences in mechanical properties. Therefore, this study selects silty clay as the research object and conducts direct shear tests on the concrete-frozen soil interface under conditions of initial water content ranging from 12% to 24%, normal stress from 50 kPa to 300 kPa, and freezing temperature of -3℃. The results indicate that (1) both interface shear stress-displacement curves can be divided into three stages: rapid growth of shear stress, softening of shear stress after peak, and residual stability; (2) the peak strength of both interfaces increases initially and then decreases with an increase in water content, while residual strength is relatively less affected by water content; (3) peak strength and residual strength are linearly positively correlated with normal stress, and the strength of ice bonding is less affected by normal stress; (4) the mechanical properties of the cast-in-place concrete-frozen soil interface are significantly better than those of the precast concrete-frozen soil interface. However, when the water content is high, the former's mechanical performance deteriorates much more than the latter, leading to severe strength loss. Therefore, in practical engineering, cast-in-place concrete construction is preferred in cases of higher negative temperatures and lower water content, while precast concrete construction is considered in cases of lower negative temperatures and higher water content. This study provides reference for the construction of frozen soil-structure interface in cold regions and basic data support for improving the stability and service performance of cold region engineering.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.79-88
• /
• 1999

The stability and performance (peel strength) of the acrylic copolymer and various modified rosin systems were investigated. The peel strength was measured over a wide range of scaling rates, and the influence of the viscoelasticity of the PSA(pressure sensitive adhesive) was considered. In the case of miscible systems, the peak of peel strength (PSA performance) over wide peel rates was changed and modified systematically with increasing glass transition temperature of the blends. The peak of the peel strength for blended systems shifts toward the lower rate side as glass transition temperature ($T_g$) of the blend increased. The influence of esterification of the rosin on performance and stability against deterioration was greatly modified by blending with rosin of glycerol ester and rosin pentaerythritol ester. The failure mode of the blend varies with the combination with acrylic copolymer and modified rosin, and cohesive failure was found at a lower peel rate while interfacial failure was found at a high peel rate. A few systems where a single Tg could be measured, despite the fact that two phases were observed microscopically, were detected.

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.50-57
• /
• 1997

A fast tool servo (FTS) for diamond turning improves machining accuracy by quickly compensating relative position errors between the cutter and the workpiece. Therefore, the FTS needs to have large band-width with good tracking performance. Serious hysteresis nonlinearity of PZT actuators used in the FTS, however, deteriorates fast tracking performance. Several types of feedforward hysteresis compensators and feedback controllers are tested to improve tracking performance. Through simulations and experiments, control structure which yields the smallest tracking error is selected. The maximum peak to peak error in tracking a sinusoidal waveform is reduced by one fifth compared to that of a regular PID controller.

• Preventive Nutrition and Food Science
• /
• 제4권3호
• /
• pp.171-174
• /
• 1999

For monitoring lipid oxidation development in cooked ground pork during refrigerationm, malonaldehydethiobarbituric acid(MA-TBA) contents were measured using high performance liquid chromatography(HPLC). As the oxidation proceeded during refergeration, TBA-reaction substances(TBARS) absorbances increased and the corresponding HPLC peak areas also increased proportationately. The correlation coefficient between the HPLC peak areas and MA-TBA absorbance were 0.9979. The treatemtn of cetrimide, an ion pairing agent, gave a complete resolution of the MA-TBA complex and the butanol extraction of the complex increased its recovery by 37.8%. Both cetrimide treatment and butanol extraction are essential steps for analyzing MA-TBA complex in ground pork wiht HPLC. A reliable and specific measurement of NA-TBA in ground pork was successfully performed using HPLC.

• 한국통신학회논문지
• /
• 제32권7A호
• /
• pp.694-699
• /
• 2007

본 논문에서는 레일리 페이딩 채널환경에서 폐루프 송신 안테나 다이버시티 시스템을 위한 최적의 안테나 가중치 방식을 연구한다. 평균전력 및 첨두 전력의 제한이 있는 경우에 폐루프 송신 안테나 다이버시티의 평균 비트 오류율을 최소화하는 최적의 송신 안테나 가중치를 닫힌 형식의 수학식으로 유도한다. 본 논문의 결과로부터 첨두 전력의 제한으로 인한 평균 비트 오류율 성능의 열화는 사용가능 한 평균전력이 커질수록 그리고/또는 송신 안테나 개수가 증가할수록 그 성능 열화의 정도가 더욱 커짐을 알 수 있다.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.593-609
• /
• 2004

Peak response is a more suitable index than mean response in the light of structural safety. In this study, a controller optimization method is proposed to restrict peak responses of building structures subject to earthquake excitations, which are modeled as partially stationary stochastic process. The constraints are given with specified failure probabilities of peak responses. LQR is chosen to assure stability in numerical process of optimization. Optimization problem is formulated with weightings on controlled outputs as design variables and gradients of objective and constraint functions are derived. Full state feedback controllers designed by the proposed method satisfy various design objectives and output feedback controllers using LQG also yield similar results without significant performance deterioration.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.6-10
• /
• 2003

Accurate description of starting transient history allows and justifies the use of small margin of safety for the engine parts, resulting in high motor mass ratio in addition to satisfying the control and guidance requirements of the vehicle. Studies have been carried out for the prediction and reduction of ignition peak and pressure-rise rate during the starting transient of solid rocket motors. Numerical studies have been carried out using a two dimensional Navier-Stokes solver. It has been inferred through the parametric studies that, in the case of solid rocket motors with uniform port, high ignition peak is observed at high spread rate and low pressure-rise rate. In the case of the port with sudden expansion configuration, high ignition peak is observed at relatively high average spread rate and high-pressure rise rate. These studies are expected to aid the designer in reducing the ignition peak by altering the propellant properties or igniter characteristics without sacrificing the motor performance.

• Journal of Information Display
• /
• 제13권1호
• /
• pp.37-42
• /
• 2012

An empirical functional form was suggested for the analysis of the emission spectrum of high-power light-emitting diode (LED) consisting of a sharp blue peak from the LED chips and a broad yellow peak from the phosphor layer. The peak positions, half widths, shape parameters, and amplitudes of these two peaks were reliably obtained as a function of the temperature, and the results were discussed qualitatively in relation with the junction temperature. The adoption of an inert liquid was found to have significantly reduced the LED temperature and the color shift of the emitted light. The phenomenological approach used in this study may be helpful in the simulation of the LED spectrum under various thermal conditions, and may thus be helpful in the improvement of the device performance.

• 한국통신학회논문지
• /
• 제24권6A호
• /
• pp.845-854
• /
• 1999

DS/CDMA 방식의 역방향 링크 구조에 Peak-to-Average Ratio(PAR) 성능은 대역 확산 신호의 위상의 변화로 해석된다. 본 논문에서는 대역확산 신호의 위상 변화를 이용하여 PAR 특성을 해석하는 방법을 제안한다. 이러한 해석 방법을 토대로 기존의 방법을 분석하고, 몇 가지 PAR 성능 개선 방법의 예를 제시하였다. 또한 제시된 방법이 BER 성능에서도 기존의 방법과 큰 차이가 없음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.155-156
• /
• 2015

Recently, electricity consumption has rapidly increased along with economic growth. The operating strategy using emergency generator is aimed, to resolve a demand response management. For strategy of peak shedding using emergency generator, it is essential to introduce the fast transfer switching device. One of the most effective solutions is to use a static transfer switch (STS) based on thyristor. However, the characteristic of natural commutated SCR thyristor should anticipate short duration voltage sag. STS system thus requires more than a quarter cycle to successfully complete transfer process. This paper proposes the operation scheme of the STS system using the forced-commutation technique to mitigate instantaneous voltage sag during peak transfer process. Proposed STS system improved turn-off characteristic thus accomplishes the peak load shedding satisfied power quality. Performance of the proposed STS system is evaluated using electromagnetic transient program (EMTP) to confirm the effectiveness.