• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2572-2577
• /
• 2023

A field determination method for small D-T neutron source yield based on the oxygen prompt gamma rays was established. A neutron-gamma transport equation of the determination device was developed. Two yield field determination devices with a thickness of 20 mm and 50 mm were made. The count rates of the oxygen prompt gamma rays were calculated using three energy spectra processing approaches, which were the characteristic peak of 6.13 MeV, the overlapping peak of 6.92 MeV and 7.12 MeV, and the total energy area. The R-square of the calibration curve is better than 94% and the maximum error of the yield test is 5.21%, demonstrating that it is feasible to measure the yield of D-T neutron source by oxygen prompt gamma rays. Additionally, the results meet the requirements for field determination of the conventional D-T neutron source yield.

• 대한핵의학회지
• /
• 제3권1호
• /
• pp.51-58
• /
• 1969

To clarify the hematologic effects of the radioiodine ($^{131}I$) in therapeutic doses ($5{\sim}10$ mCi) on the various thyroid patients, authors studied the peripheral blood pictures of 396 goitrous patients before and after radioiodine ($^{131}I$) administrations in the Isotope Clinic of Seoul National University Hospital. Among these 396 cases of goiters, we gave 5 to 10 mCi of radioiodine ($^{131}I$) with single or fractionated administrations. The blood pictures of peripheral blood were repeated after 3 months in 40 cases of 65 cases who had been treated with $^{131}I$. The blood pictures of non-treated thyroid patients were compared with that of normal Korean values to clarify any difference between normal and goiter. The blood pictures of hyperthyroid patients treated with $^{131}I$ therapy were compared with the blood pictures of non-treated thyroid patients. The results were as following: 1) The incidence according to type: Toxic diffuse goiter: 35.4% Nontoxic nodular goiter: 29.7% Euthyroid: 13.8% Nontoxic diffuse goiter: 12.6% Hypothyroidism: 4.3% Thyroiditis($\bar{s}$ subacute form): 1.8% Toxic nodular goiter: 1.4% Malignancy: 1.0% 2) Age incidence: The range of distribution was 11 to 71 years. The peak incidence was found in the 4th decade of life. $80.6{\sim}82.6%$ of those 396 cases were found among the 3rd, 4th and the 5th decades of life. 3) Sex incidence: Sex ratio of male:female was 1:7.8. 4) The most outstanding findings in peripheral blood before treatment were decreased erythrocyte count and hemoglobin value in all types of thyroid diseases, especially in. the cases of hypothyroidism and thyroiditis. Hook worm-infested patients showed no significant difference in erythrocytes and hemoglobin values from those of other hook worm free patients. 5) Total leukocytes count was within normal range. Differential count of W.B.C. showed increased percentile of lymphocyte in diffuse toxic goiter and thyroiditis. 6) 39 cases of diffuse goiter treated with $^{131}I$ toxic showed amelioration in the anemia and restoration to normal range of lymphocyte count in association with increased percentile of neutrophiles 3 months after administration, except a case of toxic nodular goiter. One can observe anemia in slight degree, and increased lymphocytes count in hypothyroidism. Therapeutic dose of radioiodine ($^{131}I$) does not result any residual effect on the hematopoietic function. Radioiodine ($^{131}I$) therapy resulted in improvement of thyroid function in association of amelioration of pevious abnormal blood pictures. 7) Authors did not observe any myxedema resulted from radioiodine therapy during the 3 months period in this study.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권12호
• /
• pp.665-672
• /
• 2000

This paper described the measurement technology to analyze the partial discharge characteristics for long term aging of insulations. This system was consisted of high voltage generation and measurement part, PD detection part, digital conversion and signal processing part. We used the VXI system for digital conversion and signal processing part. In the digital conversion part, we studied the error of partial discharge magnitude and memory capacity for reading digital signal with the sampling rate. In the signal processing part, we showed the program algorithm to count pulses and read peak values of partial discharge. The allowable minimum sampling rate of digizer was decided to 250kS/s through analyzing test. We confirmed that this system was very useful in the study of $\phi-q-n$ characteristics of long term PD experiments with specimens being consisted of internal void defects and CIGRE II electrodes.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.241-251
• /
• 1988

본 연구에서는 숫돌입자, 결합자 및 기공으로 조성된 연삭숫돌의 구조를 다공질 포성체로 보고, WA계 비트리파이드(vitrified) 및 레지노이드(resinoid) 결합자의 연삭숫돌시험편에 대하여 AE 계측방법을 이용한 인장, 압축, 굽힘 및 압렬시험을 실시하여 Babel과 Sines의 2축응력장해소이론과 연삭숫돌의 파괴조건을 관련시켜 평가함과 동시에, 이 때 검출되는 AE 신호 처리 파라미터(Parameter) 로부터 연삭숫돌의 자인자가 파괴강도 및 AE특성에 미치는 영향을 구명하여 파괴의 예지및 연삭숫돌수명의 예측가능성등의 파괴강도특성을 평가고찰하였다.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.177-182
• /
• 2003

본 연구는 유사음에 강인한 음성인식을 위하여 음성의 유ㆍ무성음 척도를 특징 파라미터에 추가 구성하여 음절과 음소단위의 음성인식을 행하였다. 이를 위하여 피치검출에 이용되는 알고리듬인 HPS(Harmonic Product Spectrum)의 스펙트럼 정보를 이용하여 유ㆍ무성음의 정도를 나타내는 척도를 제안한다. 제안된 척도는 HPS의 첨도와 피크의 개수 그리고 높이척도이다. 이들 척도 값을 포함하여 특징 파라미터를 재구성하고 제안된 특징의 유효성을 검증하기 위하여 CVC형 유사 음절 DB하에서 기존 특징 파라미터와 비교하여 음성인식 실험을 행하였다.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.90-97
• /
• 2016

The objective of this study is to evaluate the operator's safety for the risk assessment method of impulsive noise division. Literature reviews on the basis of the impulsive noise study, the measuring methods and procedures, based on the results of the analysis process presents a risk assessment methods. In this study, analysis of the MIL-STD-1474D, B-duration graph for the peak noise level to cross the line from the measurement results is limited by the risk retracted. It is possible to determine whether there is quick can be determined whether the risk. Measurement positions measured by the microphone is installed on the risk of applying results are so located within the tolerance impulsive noise in the measurement position can interpret subjective safety is ensured. In addition, Proportional Dose technology was the proposed by the Patterson with the risk assessment method was applied to the indoor-impulsive noise. As results of this study, results for the same value of applying the technique of Proportional Dose technology results calculated by MIL-STD-1474D methods allows 1 count once increased in comparison to the result obtained.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.145-150
• /
• 1996

Acoustic Emission (AE) technique was applied to stress corrosion cracking of Inconel 600 to investigate the AE capability of detecting crack growth and to obtain the relation between AE characteristics and crack mechanism. The specimens were heat-treated in two conditions (600$^{\circ}C$ for 30 hrs or 700 $^{\circ}C$ for 1 hr) and undergone CERT at two extension rates ( 2.5${\times}$10$^{-5}$ or 1.25${\times}$10$^{－4}$(mm/s)). It was found that the AE peak amplitude from plastic deformation was generally smaller than about 48dB (0.25mV), while Intergranular stress corrosion cracking (IGSCC) and ductile fracture produced higher values of 49 to 70dB (0.3mV to 3mV). The slopes of cumulative amplitude distribution (b-values) were linearly dependent on IGSCC susceptibility and the higher the susceptibility, the smaller the b-value. The monitoring of combined AE parameters such as event rate, amplitude, count and energy can provide effective means to clearly identify the transition from crack initiation and small crack growth to rapid growth of dominant cracks.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.74-80
• /
• 1999

Work roll wear in the cold rolling of mild steel strip is strongly affected by rolling materials, rolling conditions such as roll arrangement in the cold rolling mill and lubrication. The tests were performed to find the effects of roll arrangement n the cold rolling mill on the work roll wear under the same lubricating conditions. The obtained results are as follows:If the distance of cold rolling is about 60km, the surface roughness of its was reduced by half(Ra 0.49${\mu}{\textrm}{m}$) and Pc(peak count) also was decreased to 60 ea/cm.It is easier for CC(Continuous casting) to make a slip on rolling than IC(Ingot casting). It is due to surface mirror in which first residual product appears and iron powder included Al2O3 is sticked. Because bending degree of 4Hi-rolling mill is higher than 6Hi-rolling mill, the first surface mirror was occurred to its center-point which is loaded strongly. 6Hi-rolling mill shape-controlled by intermediate roll doesn't need the initial crown to work roll. Therefore, fatigue and wear would appear a little bit.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.105-114
• /
• 1989

본 연구에서는 카본/에폭시 프리프렉으로부터 제작된 적층판을 사용하여 인장시험시 발생하는 AE특성과 파괴거동을 비교 검토하고 이들을 통하여 탄소섬유 복합재료의 파손특성과 AE법의 유용성을 규명하고자 한다.

• 한국식품영양학회지
• /
• 제12권5호
• /
• pp.523-528
• /
• 1999

The influence of ginseng on the paste or gelatinization properties by amylograph and mixing properties by farinograph of wheat flour and on quality properties color cooking quality textural and sensory properties and reducing microbial population of LL(Long Life) noodles was studied. The contents of ginseng used were from 5% to 10% based on flour weight. The viscosity property of wheat flour with ginseng was increased the initial pasting temperature but the amylograph peak viscosity were decreased in vice versa. The farinograph absorption stability and breakdown were increased by ginseng. The whiteness of Ll nodles manufactured with ginseng was lower than that of control The shear extrusion force and hardness of LL noodles manufactured with ginseng were shown much higher value than those of control. At cooking quality examination of LL noodles manufactured with ginseng weight of cooked LL noodles was decreased but volum was appeared in ice versa,. Extraction amounts of LL noodles manufactured with ginseng during cooking were much smaller than those of control Total count of microorganism of Ll noodles manufactured with ginseng were decreased during storage at 3$0^{\circ}C$ Sensory properties of cooked LL noodles which was manufactured with ginseng showed quite acceptable. Based on the cooking and sensory evaluation test addition of 7.0% ginseng to wheat flour may be suitable for processing LL noodles.