• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.505-511
• /
• 1993

The results were obtained with changes according to the surface roughness of work roll and method to make the peak count on the roll in the temper rolling, and factors to affect to the work roll surface in actual rolling machine(ie. Temper mill). Conclusions are as follows. 1. E.D.T(Electro-discharge texturing)roll is more uniform roughness distribution than shot blasted roll and it's life time is two timees longer than that of shot blasted because it has more sine wave roughness. 2. The higher peak count of surface roughness, the more time is necessary to work roll texturing In shot blasting method, Surface roughness is relating to the grit size,impeller speed and hardness of roll material, But is can't control the peak count. 3. In shot blast texturing, Surface roughness of temper rolled strip which is transfered surface roughness of work roll is more ununiform than that of E.D.T roll 4. E.D.T roll has more uniform than the shot blasted roll and has more peak count than that of shot blasted roll. The surface of painted strip to image clarity is superior to that of shot blasted roll because E.D.T roll has more peak count and smooth surface.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.6
• /
• pp.257-264
• /
• 2013

In this study, we have designed the variable amplitude threshold algorithm that can enhance the accuracy of step count using variable amplitude. This algorithm converts the x, y, z sensor values into a single energy value($E_t$) by using SVM(Signal Vector Magnitude) algorithm and can pick step count out over 99% of accuracy through the peak data detection algorithm and fixed peak threshold. To prove the results, We made the noise filtering with the fixed amplitude threshold from the amplitude of energy value that found out the detection error was increasing, and it's the key idea of the variable amplitude threshold that can be adapted on the continuous data evaluation. The experiment results shows that the variable amplitude threshold algorithm can improve the average step count accuracy up to 98.9% at 10 Hz sampling rate and 99.6% at 20Hz sampling rate.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.69-76
• /
• 1995

This paper describes characteristics of EDT(Electro Discharge Texturing) and that the strip surface has influence on the paintability. The pulse mode and the capacitor mode of recently developed EDT method were investigated about the peak shape and the roughness of strip surface. And EDT method compared the above-mentioned contents with the SBT(Shot Blast Texturing) method. The peak count of the pulse mode is more than that of the capacitor mode. But the lower roughness below the Ra 3.2 .mu. m of the strip surface, the texturing time of the pulse mode is longer than the capacitor mode. In SBT method, the peak shape is similar to capacitor mode. But the EDT roll has more uniformity than the SBT roll and has more peak count than that of SBT roll. Therefore, in the painted steel sheet, EDT roll gives better surface of clarity image than the SBT roll.

• Journal of Chest Surgery
• /
• v.13 no.4
• /
• pp.356-363
• /
• 1980

Even now, the hemorrhagic syndrome after cardiac surgery with the aid or a pump oxygenator constitutes a significant problem. The purpose of this study is to postulate the possible causes of the bleeding after open hear surgery [OHS]. Fifteen consecutive OHS patients with various heart diseases were selected and platelet count, plasma fibrinogen, serum calcium level were observed pre-, intra- and post- operatively until 21 th postoperative day [POD]. The platelet count was significantly decreased with initiation of extracorporeal circulation [ECC] and continued to decrease slowly until cessation of ECC. Within 10 minutes after ECC the platelet count stared to increase. But it was significantly less than preoperative count until 5th POD. The peak count was found on 14th POD and the platelet count was gradually decreased. Plasma fibrinogen also decreased significantly during operation, but it recovered up to preoperative amount within 5 hours after termination of ECC. Thereafter it rapidly increased until 3rd POD when it reached its peak. From 3rd POD it showed slow downward slope until 21st POD, but it remained in significantly higher level than preoperative amount. Serum calcium levels showed minimum fluctuations during the whole course of study. Conclusively, the decrease in platelet count and fibrinogen amount may play a considerable role for the postoperative hemorrhage. But numerous other effects of ECC must be accounted for.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.408-417
• /
• 1995

A study on the surface roughness variation of work roll and strip at the temper rolling was performed. The results were obtained with changes according to the surface roughness of work roll and method to make the peak count on the roll in the temper rolling, and factors to affect to the work roll surface in actual rolling machine (ie. Temper mill). The results suggests that the electro-discharge textured roll has mere uniform roughness distribution than shot blasted roll and its life time is two times longer than shot blasted because it has more sine wave roughness, and it is possible to control the Rmax. In shot blasting method, Surface roughness is related to the impeller speed, But it can't control the peak count.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.36-43
• /
• 1998

Surface roughness of cold rolled steel sheet as well as the coating technique itself is quite important in obtaining high image clarity of electronic products and car outer panels. Especially, surface characteristics of steel sheet have acquired increasing attention from the steel and automotive industries. While the influence of such characteristics on paintability formability and painted surface appearance is important in defining steel surface requirements for automotive industries. Therefore this paper is dedicated primarily to the issue of paint appearance and reviews for improvement of roughness and peak count about the surface of work roll for the actual temper mill. The conclusions were obtained as follows ; 1) Roughness and peak count about the surface of steel sheet is strongly affected by surface condition of work roll. 2) The electro-discharge textured roll has more uniform roughness distribution than shot blasted roll and it's painted appearance of steel sheet has more improvement than that of the shot blasted because it has more harmonic wave roughness, and the higher peak count of surface roughness.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.167-175
• /
• 1996

Work roll wear in the cold rolling of steel strip is strongly affected by rolling materials, rolling conditions and lubrication. Tests were performed to find the effects of rolling materials under the same lubricating conditions. Surface roughness of cold rolled steel strip as well as the coating technique itself is quite improtant in obtaining high image clarity of electronic products and car outer panels. Therefore this paper reviews for improvement of roughness and peak count about the surface of Cr coated work roll is investigated from the actual temper mill. The conclusions were obtained as follows; 1) Work roll wear in the cold rolling of steel strip is strongly affected by carbon contents of rolling materials, but there is not a separating force and total reduction ratio. 2) The roughness of strip surface is larger in the direction of width than in roll direction. 3) The electro-discharge textured roll has more uniform roughness distribu- tion than shot blasted roll and it's life time is two times longer than shot blasted because it has more harmonic wave roughness, and the higher peak count of surface roughness. 4) The life time of Cr coated work roll is 2 times longer than that of shot blasted work roll and variation of peak count, roughness and life time of Cr coated work roll is similar to electro-discharge texturing work roll. 5) The proper Cr coating thickness is 10 .mu. m at the work roll of temper mill.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.24-27
• /
• 2016

Purpose In this study, we evaluated image quality of lesion in the vicinity according filling and empty bladder developing bladder phantom. Materials and Methods Bladder phantom was developed by modifying NEMA IEC body phantom. Air-balloon was described as bladder and 6 insert were set as lesion in the vicinity bladder according to distance. The images were evaluated in terms of % BV, comparison of SUV and peak count rate (Single, Random and True count). Results % BV was decreased far away from bladder. There were different for SUV about $7.8{\pm}3.8%$ between filling and empty bladder. True count rate was decreased about 38 %. Single and random count were increased about 44, 61%. Conclusion When the lesion is close to bladder, noise is increased. That's why prior to PET-CT scan, It is important to urinate. and It helps patient to get the accurate result.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.7-13
• /
• 2001

Wire electrical discharge machining experiments in conducted to investigate characteristics of acoustic emission (AE) and electrical discharge energy due to current peak (I$_{p}$), pulse on time($\tau$/on/). The AE signals are obtained with a sensor attached to workpiece side. Machining states are identified with scanning electron microscopy and residual stress analyzer. It is demonstrated that the residual stress provide reliable informations about the machining states. Moreover, machining states can be detected successfully using both the residual stress and AE count rate.e.

• Korean Journal of Veterinary Research
• /
• v.33 no.2
• /
• pp.327-336
• /
• 1993

Present experiments were undertaken in order to clarify the effect of splenectomy on the hematology and marrow megakaryocyte picture and to know the genesis of postsplenectomy thrombocytosis in dogs. Six mongrel dogs weighing 8.5~18㎏ were used, of which three were splenectomized and the other three were laparotomized for comparison. Erythrocyte count, total and differential leukocyte counts, thrombocyte count and packed cell volume measurement were made using the blood samples. In addition, bone marrow samples obtained from the femur at 7th and 23rd day of the operation were examined for the number per low-power field, the diameter, and the distribution frequency of the megakaryocyte. From these experiments, following results were obtained : Erythrocyte count and packed cell volume showed significant decrease beginning on the 15th day of splenectomy. Total and differential leukocyte counts showed marked increase for the first 2 days of postsplenectomy. The thrombocyte count of splenectomized dogs increased from the 2nd day of the operation, reached to the peak count on the 15th day, and returned to the preoperation count by the 28th day. The megakaryocyte count per low-power field of the biopsied preparation increased in according to the increase in thrombocyte count. The megakaryocyte diameter of splenectomized dog showed no increase on the 7th or 23rd day of the operation. However, the distribution frequency of the larger megakaryocyte was higher in the splenectomized dogs than in the laparotomized dogs. The total plasma protein concentration showed no significant change after splenectomy or laparotomy. From these results, it may be concluded that the postsplenectomy thrombocytosis results from the increased megakaryocytopoesis or the activated thrombocytopoesis of the marrow megakaryocytes.