• 대한물리의학회지
• /
• 제11권2호
• /
• pp.25-31
• /
• 2016

PURPOSE: The purpose of this study was to compare the trunk muscle activity according to the direction of upper extremity lifting using elastic band. METHODS: Thirty three healthy individuals participated in this study. Each subject performed upper extremity lifting using elastic band on two different directions (straight and diagonal). And then we compared the muscle activity of respective trunk muscles of both directions. In order to examine the muscle activity of trunk muscle, we used the electromyogram to measure peak and mean torque in shoulder 90 degree flexion with sitting position. Electromyographic activities were recorded from the external oblique, internal oblique, rectus abdominis, and erector spine muscles during upper extremity lifting. RESULTS: As a result, first, there was significant difference between two directions. The muscle activity of ipsilateral external oblique and contralateral internal oblique is significantly increased in both straight and diagonal directions (p<0.05). Second, the muscle activities of external oblique and internal oblique of both side showed significant difference in diagonal direction (p<0.05). Third, the muscle activity of erector spine of both side showed significant difference in straight direction (p<0.05). CONCLUSION: Through this study, it is important that implement diagonal direction exercise at sitting positions to help increasing muscle activity of ipsilateral external oblique and contralateral internal oblique on patients when activating the trunk muscle or stabilizing the trunk.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.201-208
• /
• 2012

The purpose of this study was to investigate the effect of leg extension exercises performed on outdoor resistance exercise machines on knee extension muscle strength and quadriceps muscle group cross sectional area (CSA) in elderly women. Two groups were recruited for this study, including an exercise group (EG: n=13, $71.38{\pm}2.79$ yrs) and a control group (CG: n=5, $73.4{\pm}5.94$), In all subjects, maximum isometric and isokinetic muscle strength of knee flexion and extension were measured using an isokinetic dynamometer (Cybex(R) Humac Norm Testing & Rehabilitation System, USA). Quadriceps muscle group CSA were measured using MRI (Philps, Intera 1.5 T, NE Netherlands). The results of this study showed that post-intervention isometric knee extension peak torque value were higher than pre-intervention measures in the EG. However, the EG did not show improvement in quadriceps muscle group CSA, Also, no differences in the shift of optimal knee joint angle were observed between pre and post-intervention exercise. Outdoor leg extension exercise showed small increases in muscle strength in comparison to other resistance training exercises. The results of this study suggest that because outdoor leg extension exercise machines lack a progressive loading mechanism, significant increases in muscle strength may not be obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.603-606
• /
• 2006

We present a study on the development of a practical and quantitative technique for the assessment of the structural health condition with using piezoceramic(PZT) sensors. The electro-impedance-based technique with the PZT patches is very sensitive for evaluation of the incipient and small damage in a high frequency range, and however the commonly traditional modal analysis method is effective only for considerably larger damages in low frequency range. The paper presents the technique in detecting and characterizing real-time damage on the specimen that is an aluminum plate fastened with bolts and nuts by different torques and as well a plate with a crack. By using the special arrangement of the PZT sensors, the required longitudinal wave is generated through the specimen. A large number of experiments are conducted and the different conditions of the specimens, i.e. the location and extent of loosening bolts, and the plate with a crack are simulated. respectively. Since fixing and loosening the loosened bolt is controlled by a torque wrench, we can control exactly the experiment of the different torques. Compared with the simulated healthy condition, we can find whether or not there is a damage in the specimen with using an impedance analyzer with the PZT sensors. Several indices are discussed and used for assessing the different simulated damages. As for the location of bolt loosening, the RMSD is found to be the most appropriate index for numerical assessment and as well the RMSD shows strongly linear relationship for assessing the extent of the bolt loosening, and the frequency peak shift ${\Delta}F$ is used to assess the cracked plate. The possibility of repeatability of the pristine condition signatures is also presented and the appropriate frequency range and interval are uniquely selected through large numbers of experiments.

• 터널과지하공간
• /
• 제9권4호
• /
• pp.328-336
• /
• 1999

본 연구에서는 암석절리에 대한 수리-역학적 거동이 동시에 가능한 실내시험장치로서 회전식 전단시험기를 제작 하였다. 회전식 전단시험기는 시료의 양 끝에 비틀림 모멘트를 가함으로써 전단응력을 발생시키도록 하였다. 실험결과 회전식전단시험에 의한 절리의 최대전단강도는 직접전단시험에 의한 값보다 과소평가되었다. 이는 비틀림에 의한 전단응력이 회전축의 반경에 따라 변하며 특히 회전축 중심부에서는 전단응력이 거의 작용하지 않기 때문인 것으로 판단된다. 절리에서의 유체유동은 절리 거칠기, 접촉 면적, 초기간극 등에 의해 주로 영향을 받는 것으로 알려져 있다. 이에 본 연구에서는 초기간극의 측정을 통하여 전단-유동에 대한 수리 간극과 역학적 간극사이의 관계를 알아보았다. 초기간극의 측정과 전단-유동 상호작용시험의 결과에 근거하여, 역학적 모델과 삼승법칙으로부터 계산된 역학적 간극과 수리 간극은 체적 팽창이 발생함에 따라 증가하며 이들 사이에는 좋은 선형관계가 있음을 보였다. 그러나 수리 간극과 역학적 간극사이에는 다소 차이가 발생하였는데 이는 평행 평판모델에 의해 예측된 거동으로부터 수리 간극이 벗어남을 나타낸다.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.53-63
• /
• 2006

The general objective of this study was to investigate biomechanical characteristics of bowling swing using three-dimensional cinematography. This study focused specifically on movements of the upper body segments during a bowling swing. Eight elite female bowling players participated in this study. Subjects performed bowling swing and their performance was sampled at 60 frame/sec using two high-speed video cameras with a synchronizer. After digitizing images from two cameras, the two-dimensional coordinates were used to produce three-dimensional coordinates of the 12 body segments (20 joint reference makers). The obtained three-dimensional coordinates were fed to a custom-written kinematic and kinetic analyses program (LabView 6.1, National Instrument, Austin, TX, USA). The analyses determined the linear and angular kinematic variables of the body segments with which joint force and torque of the lower and upper trunks and the shoulder were estimated based on the Newton-Euler equations. It was found that during the bowling swing the peak linear velocities of the body segments were reached in sequence the trunk, the shoulder, the elbow, the wrist, and the bowl. This result indicates that linear momentum of the lower body and the trunk transmits to the arm segment during the bowling swing. The joint torques of the torso and the arm occurred almost simultaneously, indicating that bowling swing seem to be a push-like motion, rather than a proximal-distal sequence motion in which many of throwing motions are categorized. The ultimate objective of the bowling swing is to release a heavy-weight bowl with power and consistency. Therefore, the bowling swing observed in this study well agrees with that bowlers use the stepping to increase the linear velocity of the bowl, the simple pendulum system and the push-like segmental motion in the torso and the arm segment to enhance the power at the release of the bowl.

• Tribology and Lubricants
• /
• 제34권3호
• /
• pp.75-83
• /
• 2018

Microturbomachinery (< 250 kW) using gas foil bearings can function without oil lubricants, simplify rotor-bearing systems, and demonstrate excellent rotordynamic stability at high speeds. State-of-the-art technologies generally use bump foil bearings or leaf foil bearings due to the specific advantages of each of the two types. Although these two types of bearings have been studied extensively, there are very few studies on leaf-bump foil bearings, which are a combination of the two aforementioned bearings. In this work, we illustrate a simple mathematical model of the leaf-bump foil bearing with leaf foils supported on bumps, and predict its static and dynamic performances. The analysis uses the simple elastic model for bumps that was previously developed and verified using experimental data, adds a leaf foil model, and solves the Reynolds equation for isothermal, isoviscous, and ideal gas fluid flow. The model predicts that the drag torques of the leaf-bump foil bearings are not affected significantly by static load and bearing clearance. Due to the preload effect of the leaf foils, rotor spinning, even under null static load, generates significant hydrodynamic pressure with its peak near the trailing edge of each leaf foil. A parametric study reveals that, while the journal eccentricity and minimum film thickness decrease, the drag torque, direct stiffness, and direct damping increase with increasing bump stiffness. The journal attitude angle and cross-coupled stiffness remain nearly constant with increasing bump stiffness. Interestingly, they are significantly smaller compared to the corresponding values obtained for bump foil bearings, thus, implying favorable rotor stability performance.

• ALGAE
• /
• 제31권2호
• /
• pp.175-187
• /
• 2016

This study evaluated the effects of γ-aminobutyric acid (GABA)-enriched fermented sea tangle (GFST), as a functional food, on brain derived neurotrophic factor (BDNF)-related muscle growth and lipolysis, in a sarcopenic obesity high-risk group. Twenty-one middle-aged women (53-63 y) participated in this randomized, double-blind, placebo controlled study. Participants ingested either 1,000 mg of GFST (n = 10) or a sucrose placebo (CON) (n = 11) everyday, for 8 weeks. Subjects were asked to abstain from any regular exercise. Fasting venous blood samples, body composition and muscular strength were measured before and after supplementation period. Collectively, we demonstrated that GFST significantly decreased total fat mass and triglyceride in body composition, as well as significantly increasing serum BDNF (p < 0.001), angiotensin converting enzyme (p < 0.001), human growth hormone and insulin-like growth factor-1 levels (p < 0.05 and p < 0.05, respectively) accompanied by increased total lean mass (p < 0.01). Furthermore, the reported improvements in total work, knee extension and flexion at 60° s⁻¹ (p < 0.05), and peak torque normalized to body weight of knee flexion at 60° s⁻¹ (p < 0.05), support an ergogenic effect of GABA associated with increased growth factor levels. The use of GFST, as a functional food ingredient, to elicit anti-obesity effects and stimulate the release of muscle-related growth factors with increasing serum BDNF levels may provide a protective intervention for age-related degeneration such as sarcopenic obesity.

• 한국항공우주학회지
• /
• 제35권11호
• /
• pp.964-972
• /
• 2007

공기역학적으로 최대동력계수를 얻을 수 있도록 최적화된 블레이드를 장착한 수평축 풍력터빈 모델을 아음속 풍동에 장착하여 공력특성을 실험하였다. Upwind 방식과 downwind방식의 풍력 터빈 로터의 공력 특성을 비교하였을 때, 후자가 전자에 비해 측정토크의 교란이 더 크게 나타났으며, 이는 지지대에서 발생된 후류와 블레이드의 상호간섭이 원인으로 작용한다고 여겨진다. 블레이드 설치각이 0o인 경우에 설계 속도비 6에 해당하는 위치에서 최대 동력계수를 보여주고 있어 설계 조건을 잘 만족함을 알 수 있었다. 또한 음의 피치각 변화가 같은 값의 양의 피치각 변화에 비해 더 커다란 동력 감소가 발생되는 결과를 보여주었다.

• 한국산업융합학회 논문집
• /
• 제17권4호
• /
• pp.234-244
• /
• 2014

Recently it has been focused that the automobile engine has developed in a strong upward tendency for the use of the high viscosity and poorer quality fuels in achieving the high performance, fuel economy, and emission reduction. Therefore it is not easy to solve the problems between low specific fuel consumption and exhaust emission control at motor cars. In this study, it is designed and used the engine test bed which is installed with turbocharger and intercooler. In addition to equipped using CRDI by controlling injection timing with mapping modulator, it has been tested and analyzed the engine performance, combustion characteristics, and exhaust emission as operating parameters, and they were engine speeds(rpm), injection timing(bTDC), and engine load(%). From the result of an experimental analysis, peak cylinder pressure and the rate of pressure rise were increased, and the location of it was closer toward top dead center according to the increasing of engine speed and load, and with advancing injection timing. The combustion characteristics are effected by fuel injection timing due to be enhanced the mass burned fraction. Using the engine dynamometer for analyzing the engine performance, the engine torque and power have been enhanced according to advancing the fuel injection timing. In analyzing of exhaust emission, there has been a trade-off between PM and NOx with increasing of engine speed and load, and with advanced injection timing. The experimental data are shown that the formation of NOx has increased and PM, vice versa.

• 대한정형도수물리치료학회지
• /
• 제21권1호
• /
• pp.1-4
• /
• 2015

Background: This study was conducted in order to see if muscle strength is different according to fall experience in female elders by comparing their muscle strength of waist and knee, which is one of factors inducing fall. Method: For this study, 22 female elders aged over 65 sampled from senior centers in D City were surveyed on their fall experiences using a questionnaire asking clinical history. Then, 8 elders with fall experience (FE) and another 8 without (NFE) were selected and participated in the research. Isokinetic muscle strength was measured with isokinetic equipment BIODEX SYSTEM 3 PRO, and the peak torque was obtained from the highest of 9 measurements at angular velocity $60^{\circ}/sec$ according to the method recommended in the manual. Measured items were waist flexion and extension, and knee flexion and extension. Results: The FE group showed higher extensor and flexor muscle strength of the waist, but the difference was not significant (p<.05). In addition, no difference was observed in extensor muscle strength of the knee (p<.05). In flexor muscle strength, however, the FE group was significantly higher than the NFE group (p<.05). Conclusion: The application of regular exercise programs for improving muscle strength, endurance, etc. to those with fall experience will be effective in preventing falls among them.