• Journal of Ginseng Research
• /
• 제13권2호
• /
• pp.183-188
• /
• 1989

인삼의 주요 polyacetylens 화합물인 panaxynol, panaxydol 및 panaxytriol의 정량을 위한 GC 분석조건을 확립하였다. 이 때, GC column과 검출기는 SPB-1 fused silica capillary(0.25 mm i, d. $\times$30m, Supelco)와 불꽃이온화검출기(FID)를 사용하였으며 column oven의 온도는 $250^{\circ}C$ 등온이었다. Panaxynol, panaxydol 및 panaxytriol peaks의 retention time은 TMS 유도체화 전의 경우에는 각각 4.2, 5.1 및 6.9분이었으며 TMS유도체화 후에는 각각 4.5, 5.4 및 7.4 분이었다. TMS 유도체화 전의 panaxynol, panaxydol 및 panaxytriol의 정량가능 최소농도는 각각 20, 50 및 100ppm 이었던 데에 비하여, TMS 유도체화 후에는 세 화합물의 정량가능 최소농도가 모두 5ppm의 낮은 수준을 나타내었다. 한편, 홍삼 중의 panaxynol, panaxydol 및 panaxytriol 함량 분석값은 각각 724, 721 과 71$\mu\textrm{g}$/g이었다.

• Biomolecules & Therapeutics
• /
• 제15권2호
• /
• pp.123-126
• /
• 2007

A sensitive, simple and highly selective liquid chromatography method of determination for extraction of pseudoephedrine hydrochloride from Allegra D tablet was developed. The chief benefit of the present method is the minimal sample preparation, as the procedure is only filtering through pore syringe filter. Two drugs (pseudoephedrine hydrochloride, fexofenadine) were separated on a C$_{18}$ column and analyzed by high performance liquid chromatography (HPLC). The method had a chromatographic run time of 8.0 min. 1 ml of pseudoephedrine hydrochloride solution (1 mg/ml) was filtered through 0.22 um pore syringe filter. 50 ul of filtering solution was injected to HPLC pump and we knew the retention time (1.85 min) of separating of pseudoephedrine hydrochloride using UV detector at 280 nm. We used C$_{18}$ column (4.6 mm${\times}$250 mm), mobile phase solution (<0.05 mol/L NaH$_2$PO$_4$, 2 ml/L H$_3$PO$_4$>/CH$_3$CN / sodium dodesyl sulfate = 60 ml / 40 ml / 1 g). We separated psedoephedrine hydrochloride at run time of 1.85 min from Allegra D tablet solution (1 mg/ml) filtered through 0.22 um pore syringe filter using UV detector at 280 nm. Flow rate was set at 1.0 ml/min and the column temperature was set at 40$^{\circ}C$. Psedoephedrine hydrochloride solution (1 mg/ml) separated from Allegra D tablet was filtered through 0.22 um pore syringe filter and injected 50 ul. We confirmed the peak of psedoephedrine hydrochloride at same retention time and the separating solution was freeze-dried. In conclusion, A simple isocratic reverse-phase HPLC method has been developed that provides excellent separation of pseudoephedrine from Allegra D tablet.

• 대한의용생체공학회:의공학회지
• /
• 제28권1호
• /
• pp.148-152
• /
• 2007

In this paper, we have synthesized $Gd_2O_3:Eu^{3+}$ nano phosphor particle using a low temperature solution-combustion method. We have investigated the structure and the luminescent characteristic as the sintering temperature and europium concentration. From XRD(X-ray diffraction) and SEM(scanning electron microscope) results, we have verified that the phosphor particle was fabricated a spherical shape with $30{\sim}40nm$ particle size. From the photoluminescence results, the strong peak exhibits at 611 um and the luminescent intensity depends on europium concentration. $Gd_2O_3:Eu$ fine phosphor particle has shown excellent luminescent efficiency at 5 wt% of europium concentration. The phosphors calcinated at $500^{\circ}C$ have possessed the x-ray peaks corresponding to the cubic phase of $Gd_2O_3$. As calcinations temperature increased to $700^{\circ}C$, the new monoclinic phase has identified except cubic patterns. From the luminescent decay time measurements, mean lifetimes were $2.3{\sim}2.6ms$ relatively higher than conventional bulk phosphors. These results indicate that $Gd_2O_3:Eu$ nano phosphor is possible for the operation at the low x-ray dose, therefore, the application as medical imaging detector.

• Journal of Radiation Protection and Research
• /
• 제21권4호
• /
• pp.285-296
• /
• 1996

NaI(T1) 섬광검출기를 이용하여 감마선원인 Cr-51, Cs-137, Mn-54, Zn-65에 대하여 공기와 깊이가 다른 수중에서 에너지스펙트럼을 조사하였다. 측정한 스펙트럼의 차이와 변화를 정량적으로 비교분석하기 위해서 측정 스펙트럼을 곡선근사할 수 있는 응답함수를 구성하였다. 본 연구에서 밝혀진 바에 의하면 구성된 응답함수는 공기 중 뿐만 아니라 수중에서 측정된 스펙트럼을 거의 완전하게 나타낼 수 있었다. 또한 응답함수에 사용된 계수들을 비교함으로써 공기와 수중에서-물의 깊이에 따른-스펙트럼의 특성 면화를 정량적으로 규정할 수 있었다. 응답함수의 계수 가운데 전에너지 봉우리의 높이 및 비율이 물의 깊이에 가장 민감하게 영향을 받았으며, 그 외에도 전에너지 봉우리의 퍼진 정도, flat continuum의 높이, 1차 콤프턴산란 연속의 높이, Compton edge의 모양을 나타내는 응답함수계수 등에서 미약하나마 물의 깊이에 따라 변화를 보였다.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.81-86
• /
• 2016

Background: For positron emission tomography (PET) application, cadmium zinc telluride (CZT) has been investigated by several institutes to replace detectors from a conventional system using photomultipliers or Silicon-photomultipliers (SiPMs). The spatial and energy resolution in using CZT can be superior to current scintillator-based state-of-the-art PET detectors. CZT has been under development for several years at the Korea Atomic Energy Research Institute (KAERI) to provide a high performance gamma ray detection, which needs a single crystallinity, a good uniformity, a high stopping power, and a wide band gap. Materials and Methods: Before applying our own grown CZT detectors in the prototype PET system, we investigated preliminary research with a developed discrete type data acquisition (DAQ) system for coincident events at 128 anode pixels and two common cathodes of two CZT detectors from Redlen. Each detector has a $19.4{\times}19.4{\times}6mm^3$ volume size with a 2.2 mm anode pixel pitch. Discrete amplifiers consist of a preamplifier with a gain of $8mV{\cdot}fC^{-1}$ and noise of 55 equivalent noise charge (ENC), a $CR-RC^4$ shaping amplifier with a $5{\mu}s$ peak time, and an analog-to-digital converter (ADC) driver. The DAQ system has 65 mega-sample per second flash ADC, a self and external trigger, and a USB 3.0 interface. Results and Discussion: Characteristics such as the current-to-voltage curve, energy resolution, and electron mobility life-time products for CZT detectors are investigated. In addition, preliminary results of gamma ray imaging using 511 keV of a $^{22}Na$ gamma ray source were obtained. Conclusion: In this study, the DAQ system with a CZT radiation sensor was successfully developed and a PET image was acquired by two sets of the developed DAQ system.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.227-231
• /
• 2005

We have developed a microsystem with a capillary electrophoresis (CE) and an electrochemical detector (ECD). The microfabricated CE-ECD systems are adequate for a disposable type and the characteristics are optimized for an application to the electrochemical detection. The system was realized with polydimethylsiloxane (PDMS)-glass chip and indium tin oxide electrode. The injection and separation channels (80 um wide$\ast$40 um deep) were produced by moulding a PDMS against a microfabricated master with relatively simple and inexpensive methods. A CE-ECD systems were fabricated on the same substrate with the same fabrication procedure. The surface of PDMS layer and ITO-coated glass layer was treated with UV-Ozone to improve bonding strength and to enhance the effect of electroosmotic flow. For comparing the performance of the ITO electrodes with the gold electrodes, gold electrode microchip was fabricated with the same dimension. The running buffer was prepared by 10 mM 2-(N-morpholino)ethanesulfonic acid (MES) titrated to PH 6.5 using 0.1 N NaOH. We measured olectropherograms for the testing analytes consisted of catechol and dopamine with the different concentrations of 1 mM and 0.1 mM, respectively. The measured current peaks of dopamine and catechol are proportional to their concentrations. For comparing the performance of the ITO electrodes with the gold electrodes, electropherograms was measured for CE-ECD device with gold electrodes under the same conditions. Except for the base current level, the performances including sensitivity, stability, and resolution of CE-ECD microchip with ITO electrode are almost the same compared with gold electrode CE-ECD device. The disposable CE/ECD system showed similar results with the previously reported expensive system in the limit of detection and peak skew. When we are using disposable microchips, it is possible to avoid polishing electrode and reconditioning.

• 대한전자공학회논문지TC
• /
• 제47권2호
• /
• pp.74-79
• /
• 2010

본 연구에서는 다수의 혼 안테나 배열을 가지는 밀리미터파 수동 이미징 센서를 설계 하였다. 6개의 혼 안테나를 일체형 구조 형태로한 배열 안테나를 제안하였고, 이를 공간상에 효율적으로 배치함으로써, WR-10 구조의 LNA와의 결합이 용이하도록 하였다. 안테나는 94GHz의 중심주파수에서 17.5dBi의 최대 이득을 가지고, W 주파수 대역에서 -25dB 이하의 반사계수 값을 가지도록 설계 하였고, 고해상도의 안테나 배열을 위해 안테나 개구면을 $6mm{\times}9mm$의 작은 크기로 설계하였다. LNA는 양호한 성능의 수신감도를 얻기 위해 55dB 이상의 총 이득과, 5dB 이내의 잡음지수를 가지도록 설계 하였다. 밀리미터 신호를 직류 신호로 변환하기 위해 상용 제로 바이어스 쇼키 다이오드를 사용한 검파기를 제작하였고, 검파기의 성능을 측정한 결과 500mV/mW 이상의 양호한 수신감도를 얻었다.

• 분석과학
• /
• 제14권3호
• /
• pp.212-220
• /
• 2001

본 연구는 감마선 분광분석법을 이용하여 환경시료에 함유되어 있는 천연방사성 핵종인 라듐($^{226}Ra$) 및 라돈($^{222}Rn$)의 직접분석법의 개발을 목표로 수행되었다. 감마선 분광분석법에 의한 라듐 및 라돈의 분석에서는 주변환경조건에 따라서 변화의 폭이 큰 대기중의 라돈 및 딸핵종에 의한 백그라운드 영향을 소멸시키거나 보정해 주어야만 한다. 본 고에서는 측정함 내부로 질소가스를 흘려주어 측정함 내부를 질소가스 분위기로 바꾸어 줌으로서 대기중의 라돈 및 딸핵종에 의한 불안정한 백그라운드를 소멸시키고자 하였다. 질소가스를 검출기 주위로 흘려주었을 때, 1 MeV 이하의 에너지 영역에 대해서는 80% 그리고 1 MeV 이상에서는 20~50% 정도까지 백그라운드를 감소시킬 수 있었다. 즉, 검출기 주위를 질소분위기로 바꾸어 줌으로서 백그라운드를 소멸, 안정화시킴으로서 검출감도를 약 10배 향상시킬 수 있었다.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.91-96
• /
• 2011

The purpose of this study was to minimize of entrance surface dose (ESD) at the eye using high kVp technique in the computed radiography. We used REX-650R (Listem, Korea) general X-ray unit, and external detector with ESD dosimeter of Piranha 657 (RTI Electronics, Sweden). We used head of the whole body phantom. The total 64 images of X-ray anterior-posterior of skull were acquired using the film/screen (F/S) method and the digital of computed radiography method. The three radiology professor of more 10 years of clinical career evaluated a X-rays images in the same space by 5-point scale. The external detector was performed measurement of ESD of three times by same condition on the eye of the head phantom. The good image quality in the F/S method (90 kVp, 2.5 mAs) showed at the minimized ESD of 0.310 ${\pm}$ 0.001 mGy. the good image quality in the computed radiography method (90 kVp, 2.0 mAs) showed at the minimized ESD of 0.180 ${\pm}$ 0.002 mGy (P = 0.002). Finally the radiation dose could reduced about 50% in the computed radiography method more than the F/S method. In addition the eye entrance surface dose using high kVp technique with the computed radiography was reduced 92% more than conventional technique (F/S method).

• 방사선산업학회지
• /
• 제9권3호
• /
• pp.143-151
• /
• 2015

A PET-MR system is particularly useful in diagnosing brain diseases. We have developed a prototype positron emission tomography (PET) system which can be inserted into the bore of a whole-body magnetic resonance imaging (MRI) system that enables us to obtain PET and MRI images simultaneously with a reduced cost. Silicon photomultipliers (SiPM) are appropriated as a PET detector at PET/MR system because detectors have a high gain and are insensitive to magnetic fields. Despite of its improved performance compared to that of PMT-based detectors, there is a problem of the photo-peak channel shift which is due to the increase of the temperature inside the ring detector. This problem will occur decreasing sensitivity of the PET and image distortion. In this paper, I quantitative analyze parameters of the KAIST SiPM depending on temperature by experiments. And I designed cooling methods in consideration of the degradation of sensors for correction of the temperature in the PET gantry. According to this research, we expect that distortive images and degradation of the sensitivity will not be occurred with using the above idea to reduce heat even if the PET system operates for a long time.