• Journal of Veterinary Clinics
• /
• v.30 no.1
• /
• pp.5-11
• /
• 2013

Acute gastric ulcer is caused by the unbalance between cell proliferation and apoptosis in gastric mucosa. Platycodin D (PD) has been reported to have a variety of pharmacological properties, including antioxidant and antiin-flammatory effect. In the present study, we investigated the protective effect of PD on the basis of cell proliferation/apoptosis and cyclooxygenase-2 (COX-2) expression in the acute gastric ulcer induced by ibuprofen in Rats. Acute gastric damage was induced by the repeated treatment of ibuprofen (200 mg/kg) with 8 hrs interval in a day. PD was orally administrated at concentrations of 2.5 and 5 mg/kg every day for 5 days before the induction of acute gastric ulcer. Macroscopically, ibuprofen caused a significant increase in the number of lesions in the gastric mucosa. But pretreatment of PD significantly reduced ibuprofen-induced gastric lesion score and prevented excessive mucus depletion in gastric mucosa. Also, pretreatment of PD counteracted significantly Ki-67 decrease in the proliferating zone of gastric glandular portion and highly reduced or delayed apoptotic cells on TUNEL assay. In addition, COX-2 expression was increased in gastric mucosa bearing erosions or ulcers but pretreatment of PD reduced COX-2 expression in gastric lesions. These results show that pretreatment of PD has a protective effect against ibuprofen-induced gastric damage, not only by counteracting a decrease of cell proliferation, but also by inhibiting or delaying apoptosis via regulation of COX-2 within the gastric mucosa.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.115-115
• /
• 1999

GaN는 직접천이형 wide band gap(3.4eV) 반도체로서 청색/자외선 발광소자 및 고출력 전자장비등에의 응용성 때문에 폭넓게 연구되고 있다. 이러한 넓은 분야의 응용을 위해서는 열 적으로 안정된 Ohmic contact을 반드시 실현되어야 한다. n-type GaN의 경우에는 GaN계면에서의 N vacancy가 n-type carrier로 작용하기 때문에 Ti, Al, 같은 금속을 접합하여 nitride를 형성함에 의해서 낮은 접촉저항을 갖는 Ohmic contact을 하기가 쉽다. 그러나 p-type의 경우에는 일 함수가 크고 n-type와 다르게 nitride가 형성되지 않는 금속이 Ohmic contact을 할 가능성이 많다. 시료는 HF(HF:H2O=1:1)에서 10분간 초음파 세척을 한 후 깨끗한 물에 충분히 헹구었다. 그런 후에 고순도 Ar 가스로 건조시켰다. Pd와 Ni은 열적 증착법(thermal evaporation)을 사용하여 p-GaN에 상온에서 증착하였다. 현 연구에서는 열처리에 의한 Pd의 clustering을 줄이기 위해서 wetting이 좋은 Ni을 Pd 증착 전과 후에 삽입하였으며, monchromatic XPS(x-ray photoelectron spectroscopy) 와 SAM(scanning Auger microscopy)을 사용하여 열처리 전과 40$0^{\circ}C$, 52$0^{\circ}C$ 그리고 695$0^{\circ}C$에서 3분간 열처리 후의 온도에 따른 morphology 변화, 계면반응(interfacial reaction) 및 벤드 휨(band bending)을 비교 연구하였다. Nls core level peak를 사용한 band bending에서 Schottky barrier height는 Pd/Ni bi-layer 접합시 2.1eV를, Ni/Pd bi-layer의 경우에 2.01eV를 얻었으며, 이는 Pd와 Ni의 이상적인 Schottky barrier height 값 2.38eV, 2.35eV와 비교해 볼 때 매우 유사한 값임을 알 수 있다. 시료를 후열처리함에 의해 52$0^{\circ}C$까지는 barrier height는 큰 변화가 없으나, $650^{\circ}C$에서 3분 열처리 후에 0.36eV, 0.28eV 만큼 band가 더 ？을 알 수 있었다. Pd/Ni 및 Ni/Pd 접합시 $650^{\circ}C$까지 후 열 처리 과정에서 계면에서 matallic Ga은 온도에 비례하여 많은 양이 형성되어 표면으로 편석(segregation)되어지나, In-situ SAM을 이용한 depth profile을 통해서 Ni/Pd, Pd/Ni는 증착시 uniform하게 성장함을 알 수 있었으며, 후열처리 함에 의해서 점차적으로 morphology 의 변화가 일어나기 시작함을 볼 수 있었다. 이는 $650^{\circ}C$에서 열처리 한후의 ex-situ AFM을 통해서 재확인 할 수 있었다. 이상의 결과로부터 GaN에 Pd를 접합 시 심한 clustering이 형성되어 Ohoic contact에 문제가 있으나 Pd/Ni 혹은 Ni/Pd bi-layer를 사용함에 의해서 clustering의 크기를 줄일 수 있었다. Clustering의 크기는 Ni/Pd bi-layer의 경우가 작았으며, $650^{\circ}C$ 열처리 후에 barrier height는 Pd/Ni bi-layer의 경우에도 Ni의 영향을 받음을 알 수 있었다.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.147-153
• /
• 2005

Naldrettite, recently discovered in the Mesamax Northwest deposit, Ungava region, northern Quebec, Canada, was reported as a new mineral. In order to confirm whether itis a natural equivalent of synthetic $Pd_2Sb$ phase or not, the pure $Pd_2Sb$ phase has been synthesized and investigated by reflected microscope, electron microprobe analyser, X-ray diffractometer, and micro-indentation hardness tester. Under reflected light synthetic $Pd_2Sb$ Phase is white with a creamy tint in both air and oil and weakly bireflectant. Anisotropism is strong, from brownish gray to greenish blue in air. Micro-indentation hardness test gives VHN100=293(242-322). Composition of the phase is $63.7\~64.3wt.\%\;Pd\;and\; 36.4\~36.8wt.\%$ Sb, and is entirely consistent. The phase, quenched from $500^{\circ}C$, is orthorhobic with space group $Cmc2_1$, and the cell parameters are a=3.366(1), b=17.523(3), c=6.929(2) ${\AA}$. All mineralogical properties of synthetic $Pd_2Sb$ compare very well with those of naldrettite, confirming that naldrettite is the natural analogue of the synthetic $Pd_2Sb$ phase.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.27-41
• /
• 1999

The Ag-Pd-Cu alloys containing a small amount of Au is commonly used for dental purposes, because this alloy cheaper than Au-base alloys for clinical use. However, the most important characteristic of this alloy is age-hardenability, which is not exhibited by other Ag-base dental alloys. The specimens used were Ag-30Pd-10Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electric furnace and centrifugal casting machine in Ar atmosphere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at 350-$550^{\circ}C$ Age-hardening characteristic of the small Au-containing Ag-Pd-Cu dental alloys were investigated by means of hardness testing, X-ray diffraction and electron microscope observations, electrical resistance, differential scanning calorimetric, energy dispersed spectra and electron probe microanalysis. Principal results are as follows ; Maximum hardening occured in two co-phases of ${\alpha}_2$ + PdCu In stage II, decomposition of the $\alpha$ solid solution to a PdCu ordered phase($L1_o$ type) and an Ag-rich ${\alpha}_2$ phase occurred and a discontinuous precipitation occurred at the grain boundary. From the electron microscope study, it was concluded that the cause of age-hardening in this alloy is the precipitation of the PdCu redered phase, which has AuCu I type face-centered tetragonal structure. Precipitation procedure was ${\alpha}{\to}{\alpha}_1+PdCu{\to}{\alpha}_2+PdCu$ at Pd/Cu = 3 Pd element of Ag-Pd-Cu alloy is more effective dental alloy on anti-corrosion and is suitable to isothermal ageing at $450^{\circ}C$.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.03a
• /
• pp.92-93
• /
• 1993

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.05a
• /
• pp.104-105
• /
• 1995

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.1
• /
• pp.39-48
• /
• 2017

We present penetration depth (PD) computation algorithms using explicit Minkowski sum construction ($PD_e$) and implicit Minkowski sum construction ($PD_i$). Minkowski sum construction is the most time consuming part in fast PD computation. In order to address this issue, we find a candidate solution using a centroid difference and motion coherence. Then, $PD_e$ constructs or updates partial Minkowski sum around the candidate solution. In contrast, $PD_i$ constructs only a tangent plane to the Minkowski sums iteratively. In practice, our algorithms can compute PD for complicated models consisting of thousands of triangles in a few milli-seconds. We also discuss the benefits of using different construction of Minkowski sums in the context of PD.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.201-206
• /
• 2002

Pd/Si/Pd/Ti/Au ohmic contact to n-type InGaAs was investigated with rapid thermal annealing conditions. Minimum specific contact resistivity of $3.9\times10^{-7}\Omega\textrm{cm}^2$ was achieved at $400^{\circ}C$/20sec. This was related to the formation of Pd-Si compounds by rapid thermal annealing and the in-diffusion of Si atoms to InGaAs surface. However, the specific contact resistivity increased slightly to low-$10^{-6}\Omega \textrm{cm}^2$ at $400^{\circ}C$ for longer than 30 seconds, and to high-$10^{-7}$ at 425~$450^{\circ}C$ for 10 seconds. This resulted from the formation of Pd-Ga compounds. Superior ohmic contact and non-spiking planar interface between ohmic materials and InGaAs were maintained after annealing at high temperature. Therefore, this thermally stable ohmic contact system is a promising candidate for compound semiconductor devices.

• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.320-326
• /
• 1986

The antitumor properities of metal are not limited to Pt(II) complexes. Recently, it was reported that some Pt(II) and Pd(II) complexes with sulfur and nitrogen ligands had potential antitumor reactivity. Pt(II) complexes is toxic drug for anticancer. Therefore, the complexes of Pd(II) with adenine, uracil, cytosine and malonate ligands are interesting for anticancer drug. We synthesized new palladium complexes containing nucleosides. The reactions of Pd(II) with adenine, uracil, cytosine and malonate ligands have been studied in aqueous solutions. The complexes isolated from these reactions have the following formulas; $[Pd(en)(C_5H_5N_5)_2](NO_3)_2,\;[Pd(en)(C_4H_3N_2O_2)Cl],\;[Pd(en)(C_3H_2O_4)]\;and\;[Pd(en)(C_4H_5N_3O)_2](NO_3)_2{\cdot}(C_4H_5N_3O)$. The compounds have been identified by elemental analysis, mass spectra, infrared spectra and electronic spectra.

• Journal of the Korean Magnetics Society
• /
• v.18 no.5
• /
• pp.190-194
• /
• 2008

Epitaxial $L1_0$ FePd (001) thin films were successfully manufactured by sputtering deposition method. The structure and magnetic properties of FePd thin films were characterized as a function of Fe compositions. It was found that the long-range ordering parameter had a maximum for the stoichiometric composition, whereas the magnetic anisotropy had a maximum as the Fe content is decreased to slightly above the stoichiometric composition. This indicates that the stoichiometry is directly contributed to the chemical ordering and the magnetic anisotropy. These results imply that nonstoichiometric FePd compositions, with a slight excess of Pd, may in fact be preferred for applications that require high magnetic anisotropy.