• 제목/요약/키워드: PbSe

검색결과 228건 처리시간 0.028초

중금속 안정화제의 반응 매개변수 결정 및 중금속 안정화 효율성 평가 (Determining Kinetic Parameters and Stabilization Efficiency of Heavy Metals with Various Chemical Amendment)

  • 오세진;김성철;김태희;연규훈;이진수;양재의
    • 한국토양비료학회지
    • /
    • 제44권6호
    • /
    • pp.1063-1070
    • /
    • 2011
  • 본 연구는 수용액 내 존재하는 Cd, Pb을 다양한 화학적 안정화제를 이용하여 안정화 효율성을 평가하였다. 연구에 사용한 안정화제는 중금속 이온과의 반응특성 별로 석회물질, 광물질 등으로 구분하여 문헌조사를 바탕으로 5종을 선정하여 사용했다. 안정화 효율성 평가방법은 용액 내 중금속 함량을 단계적으로 제조하여 안정화 효율성, 반감기 및 반응속도 산정 및 반응 후 안정화제의 반응생성물 확인의 순으로 진행했다. 안정화 효율성 평가결과 석회물질 ($CaCO_3$)을 다량 함유하여 기본적으로 pH를 8이상으로 교정하는 안정화제의 경우 처리량에 상관없이 대부분 불용화되는 것으로 나타났으며, 낮은 산도교정 물질은 50% 수준의 효율성을 갖는 것으로 나타났다. 또한, 효율성이 크게 나타난 물질을 대상으로 반응속도상수 (K)를 산출한 결과 Cd의 경우 처리량에 따라 증가하였지만, Pb의 경우 초기에 반응속도가 빠르게 일어나 처리량에 따른 평가는 불가능 하였다. 다량의 중금속 이온과 반응시킨 안정화제의 표면관찰을 통한 생성물 검정 결과 SEM 사진으로 반응 전 후의 생성물 확인을 간접적으로 확인하였다. 또한, SEM-EDS 분석결과 반응 후 물질 표면에서 Cd과 Pb의 성분 검출을 확인하였다. 그리고 XRD 분석을 통해 효율성이 좋았던 물질에서 Cd과 Pb 성분의 검출이 확인되어 수용액 상에 이온형태로 존재하는 중금속의 복원에 안정화제를 이용한 저감은 효율적일 것으로 판단된다.

LaNiO3의 (100)배향성이 Pb(Zr,Ti)O3 박막의 결정성장과 강유전성에 미치는 영향 (Effects of (100) Orientation of LaNiO3 on the Growth and Ferroelectric Properties of Pb(Zr,Ti)O3 Thin Films)

  • 박민석;서병준;유영배;문병기;손세모;정수태
    • 한국전기전자재료학회논문지
    • /
    • 제18권4호
    • /
    • pp.338-343
    • /
    • 2005
  • Pb(Zr,Ti)O₃[PZT] thin films were prepared on a highly (100) oriented LaNiO₃[LNO] and a randomly oriented LNO by sol-gel process. The PZT thin films on a highly (100) oriented LNO show a high (100) crystal orientation (F=100 %), those on a randomly oriented LNO show a random crystal orientation (F=60 %). All the PZT layer have a flat and dense microstructure with large columnar grains and their grain size are 25 nm. In the ferroelectric curves at electric field of 40 kV/cm, a highly (100) oriented PZT/LNO samples show coercive field, E/sub c/=10 kV/cm and remanent polarization, P/sub r/=14.5 μC/㎠, while a randomly oriented PZT/LNO sample show E/sub c/=10 kV/cm and P/sub r/=5.4 μC/㎠.

방사선방어용앞치마(Apron)의 차폐율과 균일성 측정을 통한 성능평가 연구 (A study on performance evaluation of Apron by shielding rate and uniformity)

  • 유세종;임창선;심규란
    • 대한안전경영과학회지
    • /
    • 제17권1호
    • /
    • pp.103-109
    • /
    • 2015
  • In this study, we quantitatively analyzed the data by measuring the radiation shielding rate and uniformity in order to evaluate the performance of an Apron. In addition, storage conditions were also evaluated. The uniformity measurement was performed by evaluating the Apron DICOM images using a PACS program. The experiment was intended for 51 Aprons being used in three hospitals in the Daejeon area. The radiation shielding rate and uniformity were measured per lead equivalent for 0.25 mmPb, 0.35 mmPb, and 0.5 mmPb. As a result, the higher lead equivalents were, the greater differences in the non-uniformity between the top part and the bottom part became (p=0.020). In all hospitals, regarding the non-uniformity of four places in Aprons, all showed statistically significant differences (p<0.01). The average value of the transmitted radiation dose showed less difference (p=0.005) in the bottom right than in the upper right but was statistically significant. There have been no marks of manufacturing date or the date of purchase in the Apron.

$Bi_2O_3$ 첨가에 따른 (Na,K,Li)$NbO_3$계 무연 압전 세라믹스의 압전특성 (The Piezoelectrc properties of (Na,K)$NbO_3$-system Pb-free Piezoelectric Ceramics with $Bi_2O_3$ Addition)

  • 류성림;이호일;배세환;김주현;김용주;서상현
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.216-217
    • /
    • 2005
  • In this paper, in order to develop Pb-free piezoelectric ceramics, $(Li_{0.05}Na_{0.57}K_{0.38})NbO_3$ ceramic was fabricated with the variation of $Bi_2O_3$ addition. Piezoelectric properties of the ceramic were varied with the amount of $Bi_2O_3$ addition and showed the maximum kp value at.0.2 wt% $Bi_2O_3$ addition. Qm of $Bi_2O_3$ added ceramics showed lower values than the non-added ceramics, however, the kp was increased by the addition of $Bi_2O_3$ up to 0.2 wt%. At the sintering temperature of 1110$^{\circ}C$ and the calcination temperature of 850$^{\circ}C$, the optimal values of density=4.52g/$cm^3$, kp=0.47, $\varepsilon_r$=400 were obtained.

  • PDF

직접 검출형 평판 검출기 적용을 위한 변환층 설계 및 제작 (The Design and Fabrication of Conversion Layer for Application of Direct-Detection Type Flat Panel Detector)

  • 노시철;강상식;정봉재;최일홍;조창훈;허예지;윤주선;박지군
    • 한국방사선학회논문지
    • /
    • 제6권1호
    • /
    • pp.73-77
    • /
    • 2012
  • 최근 디지털 방사선 영상획득을 위한 평판형 X선 검출기에 이용되는 광도전체(a-Se, $HgI_2$, PbO, CdTe, $PbI_2$ 등)에 대한 관심이 증대되고 있다. 본 연구에서는 입자침전법 적용이 가능한 광도전 물질을 이용하여 X선 영상 검출기 적용을 위한 필름층을 제작하여 평가하였다. 먼저, X선 영상에서 일반적으로 사용되는 에너지대역인 70 kVp 의 연속 X선에 대한 필름 두께별 양자효율을 몬테카를로 시뮬레이션을 통해 조사하였다. 평가결과, 현재 상용화된 500 ${\mu}m$ 두께의 a-Se 필름에 대한 양자효율인 64 %와 유사한 $HgI_2$의 필름의 두께는 180 ${\mu}m$ 정도였으며, 240 ${\mu}m$ 두께에서 74 %의 높은 양자효율을 보였다. 입자침전법을 이용하여 제작된 239 ${\mu}m$ 필름에 대한 전기적 측정결과, 10 $pA/mm^2$ 이하의 매우 낮은 암전류를 보였으며, X선 민감도는 1 $V/{\mu}m$의 인가전압에서 19.8 mC/mR-sec의 높은 감도를 보였다. 영상의 대조도에 영향을 미치는 신호 대 잡음비 평가결과 0.8 $V/{\mu}m$의 낮은 동작전압에서 3,125의 높은 값을 보였으며, 전기장의 세기가 높아질수록 암전류의 급격한 증가에 의해 SNR 값이 지수적으로 감소하였다. 이러한 결과는 종래의 a-Se을 이용하는 평판형 검출기를 입자 침전법으로 제작 가능한 필름으로 대체하여 저가형 고성능 영상검출기 개발이 가능할 것으로 기대된다.

SoI-gel법으로 제작된 lead zirconate 박막의 광학적 특성 (Optical Properties of Lead Zirconate Thin Films by Sol-gel Method)

  • 전기범;배세환
    • 한국안광학회지
    • /
    • 제3권1호
    • /
    • pp.21-25
    • /
    • 1998
  • Lead zirconate($PbZrO_3$, PZ) 박막의 광학적 성질을 조사하였다. 광학적 성질을 조사하기 위한 PZ 박막은 sol-gel 법으로 ITO glass 위에 제작되었다. 열처리온도 $T=700^{\circ}C$로 후열처리함에 의해 증착된 시료의 pyrochlore 상은 perovskite 상으로 변환되었다. 박막의 표면은 매우 평탄하였고, 투과율은 480~2000nm의 파장에서 60~80%였으며, 굴절률은 480~1000nm의 파장에 대하여 2.1~1.9 정도였다.

  • PDF

Effect of Culture Conditions on Cathepsin B Inhibitor Production by a Marine Bacterium, Pseudomonas sp. Strain PB01

  • Hoang, Le Thu Van;Kim, Moon-Moo;Kim, Se-Kwon
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권6호
    • /
    • pp.1115-1120
    • /
    • 2008
  • A novel cathepsin B inhibitor-producing bacterium was isolated from marine sediments and identified based on its 16S rDNA sequence as Pseudomonas sp. strain PB01 (Accession No. EU126129). The growth and enzyme inhibitor production were investigated under various culture conditions. A mixture of organic nitrogen source was required for the optimal production, whereas both glucose and maltose proved to be the effective carbon sources for cathepsin B inhibitor production. Other optimal culture conditions included temperature range between 25 and $28^{\circ}C$, initial medium pH of 6.6, and shaking speed of 200 rpm. Under these optimal conditions, the maximum inhibitory activity from culture broth was approximately 50% after 30 h of cultivation. Additionally, kinetic study revealed that inhibitor production paralleled with cell growth, which suggested that the inhibitor may be a primary metabolite of that bacterium.

세슘납할로겐화물 페로브스카이트 기반 LED 기술개발 동향 (Technology Development Trends of Cesium Lead Halide Based Light Emitting Diodes)

  • 변선호
    • 한국전기전자재료학회논문지
    • /
    • 제29권12호
    • /
    • pp.737-749
    • /
    • 2016
  • Recently perovskite materials with much cheaper cost and marvellous optoelectronic properties have been studied for next generation LED display devices overseas. Technology development trends of inorganic $CsPbX_3$(X=halogen) based LEDs (PeLEDs) with assumed high stability were investigated on literature worldwide. It was found that syntheses methods of these nanocrystals (NCs, mainly quantum dots, QDs) made great progress. A new room temperature synthesis method showed outstanding PL (photoluminescence) properties such as high quantum yield (QY), narrow emission width, storage stability comparable with, or often exceeding those of conventional hot injection method and CdSe@ZnS type inorganic colloidal QDs. PeLEDs with shell layers might be more promising, indicating urgent real research start of this solution processing technology for small businesses in Korea.

참깨 부산물 Biochar의 중금속 흡착특성 (Adsorption Characteristics of Heavy Metals using Sesame Waste Biochar)

  • 최익원;서동철;강세원;이상규;서영진;임병진;허종수;조주식
    • 한국토양비료학회지
    • /
    • 제46권1호
    • /
    • pp.8-15
    • /
    • 2013
  • 참깨 부산물의 중금속 흡착제로서 가능성을 검토하기 위해 $600^{\circ}C$에서 1시간동안 열분해 한 참깨 부산물 biochar를 이용하여 중금속 오염폐수 중의 중금속 흡착특성을 조사하였다. Biochar의 중금속 제거효율은 Pb>Cu>Cd>Zn 순으로 Pb의 흡착효율이 가장 높게 나타났다. 참깨 부산물 biochar를 이용한 흡착실험 결과를 Freundlich와 Langmuir 등온흡 착식에 적용하여 각각의 중금속 인자를 산출한 결과 Langmuir와 Freundlich 등온흡착식 모두에서 Pb의 흡착능력이 Cu, Cd 및 Zn에 비해서 우수한 것으로 나타났다. Pb의 경우는 Langmuir 등온흡착식이 Freundlich 등온흡착식에 비해 더 적합하였으나 Cu, Cd 및 Zn의 경우 저농도에서 약간 차이는 있었으나 두 등온흡착식 모두 적합하였다. 전자현미경 (SEM)을 이용하여 중금속 흡착 전 후의 biochar 표면을 관찰한 결과 중금속 흡착 후에 각각의 중금속이 흡착되어 있는 것을 관찰 할 수 있었다. FT-IR 분석결과 중금속은 주로 방향족 C=O ring stretching ($1160cm^{-1}$ $1384cm^{-1}$$1621cm^{-1}$)에서 흡착되는 것으로 관찰되었다. 이상의 결과를 미루어 볼 때 참깨 부산물로 제조한 biochar는 중금속 흡착제로서의 활용 가능성이 높을 것으로 판단된다.

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.