• 한국방사선학회논문지
• /
• 제3권4호
• /
• pp.29-33
• /
• 2009

최근 디지털 방사선 영상획득을 위한 평판형 X선 검출기에 이용되는 광도전체(a-Se, $HgI_2$, PbO, CdTe, $PbI_2$ 등)에 대한 관심이 증대되고 있다. 본 연구에서는 $HgI_2$ 와 a-Se 필름 변환체에 대해 X선에 대한 전기적 신호검출 특성을 조사하였다. 수백 마이크로의 두꺼운 광도전체 필름 제작을 위해 $HgI_2$는 입자침전방법을 이용하였고, a-Se은 종래의 진공열증착법을 이용하였다. 제작된 시편에 대한 전기적 특성 실험은 누설전류, 신호응답 특성, 민감도 등을 측정하였다. 실험결과로부터, $HgI_2$는 상용화된 a-Se에 비해 낮은 동작전압특성과 우수한 신호 발생율을 보임을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.345-345
• /
• 2007

본 연구는 x선 영상검출기 적용을 위한 $HgI_2$ 필름의 누설전류 특성 향상을 위한 연구로서, $HgI_2$기반의 다양한 물질을 이용하여 다층구조 방식으로 제작된 필름의 누설전류 특성평가 및 제작된 다층구조의 상부전극물질의 변화에 따른 누설전류 특성을 평가하였다. $HgI_2$기반 다층구조의 제작 물질은 Parylene, $PbI_2$, a-Se을 사용하여 시편(parylene/ITO, ITO/$HgI_2/PbI_2$/ITO, ITO/$HgI_2$/a-Se/ITO)을 제작하였으며, 필름 제작공정은 Screen print, PVD공정으로 다층구조 필름을 제작하였다. 또 한, 다층구조로 제작된 필름에 상부 전극물질은 Au, In, ITO를 사용하여 누설전류의 특성을 평가하였다. 측정 장치로 DC Power Supply(556H. EG&G : 50~200V), X 선 발생장치(Toshiba KXO-50N), 차폐체 (Al 및 Cu), Oscilloscope (LeCroy, LC334AM, USA), Electrometer (Keithley, 6517), Ion chamber 2060 (Radical Co.)을 이용하여, 제작된 $HgI_2$기반 다층구조 sample의 누설전류 특성을 실험하였다. 이 결과로 다층구조에 제작된 물질 및 상부전극에 따른 누설전류의 특성을 평가하였다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.91.2-91
• /
• 2003

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.552-555
• /
• 2008

The purpose of this study was to find a best condition of fabricating lead zirconate thin film by sol-gel method, especially to find mol ratio and post annealing temperature. Lead zirconate thin film was made by spin coating method. The ratios of Pb and Zr of precursors were 1:0.8, 1:1.0, and 1:1.2. Annealing temperature of films were $600^{\circ}C$, $700^{\circ}C$, and $800^{\circ}C$ for 1 minute. Crystal structure was observed from XRD and antiferroelectricity was observed from hysteresis curves. The optimum mol ratio of Pb:Zr is 1:0.8 and annealing temperature is $800^{\circ}C$.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.64-64
• /
• 2005

• 약학회지
• /
• 제43권5호
• /
• pp.577-583
• /
• 1999

Concentrations of heavy metals, including As, Cd, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, Si, Sn, V and Zn in the internal organs (liver, kidney, heart, lung, spleen, cerebrum and bone) of Korean obtained from 91 forensic medical autopsy cadavers, with an age range of 12-87 years, were determined by inductively coupled plasma atomic emission spectrometry. From the results, positive correlation with age was observed in the following cases : Cd in liver, kidney and cerebrum; Fe in cerebrum and bone; Pb in bone; v in lung. Copper in heart, Hg in bone and Mn in kidney correlated negatively with age. A significantly positive correlation between Se and Hg was only observed in heart. Significant correlation coefficients between Se and As were observed in liver, kidney, heart spleen and bone. The correlation between Cd and Zn was significant in liver and kidney, indicating that the distribution of Cd is similar to that of Zn in the liver and kidney.

• 자원환경지질
• /
• 제13권3호
• /
• pp.167-184
• /
• 1980

The granitic plutons associated with Ogcheon geosynclinal zone can be grouped into three different subzones; SE-Subzone for the migmatitic and schistose granites of the southeast margin, 101-181m.y. old; NW-Subzone for those of the northwest margin, 112-163m. y. old; and C-Subzone for those of central part of the zone, 63-183m.y. old. The intrusives in C-Subzone are further subdivided into the older, adamellite to granodiorite (148-183m.y. old) and the younger, perthitic granites (63-106m,y. old). The metallogenic distribution of South Korea suggests that, in the Ogcheon Zone, it is possible to delineate an elongated polymetallogenic province in the general orientation of the zone intimately related with the migmatite and plutonic zones mentioned. Moreover, the mineralization in the province was basically controlled by the patterns of local geology involving country rocks and related igneous bodies, that permit subdivision of the province into the following three parts: Northeast (NE) Province consists dominantly of thick Paleozoic calcareous sediments; Middle (M) Province is characterized by predominant argillaceous and partly calcareous sediments of Precambrian to Late Paleozoic age; and Southwest (SW) Province consisting mainly of volcanic and arenaceous sediments of Mesozoic age. The three different plutonic zones with three different country rock provinces above mentioned make a combination which consists of nine classes. Each class can be assumed to be characterized by specific mineralization type. In order to classify the mineralization types, the present study sampled twenty six ore deposits and mineralized areas in Ogcheon zone as shown figure 2; eight ore deposits from plutonic SE-Subzone, ten from the plutonic NE-Subzone and eight from the plutonic C-Subzone. The characteristics of the classes are as follows: NE-SE is predominant in Au-Ag vein and Sn-migmatite of katazonal occurrence; NE-C is most productive in Pb-Zn and remarkable in Fe contact deposit in mesozone and partly Pb-Zn-Cu skarn in limestone and subordinate in mesozone and partly Pb-Zn pipes; M-SE is considerable in Au-Ag vein and rare elements (Nb, Ta, etc.) of pegmatite; M-C is predominant in F-veins in epizone and Mo-W, Fe, Cu veins occur in replacement type; M-NW is productive in Fe metamorphic and skarn types, partly remarkable in Cu, Pb-Zn contact; SW-SE is barren in mineralization related to Jurassic igneous rocks; SW-C is predominant in alunite and pyrophyllite in tuffs; and SW-NW is scarece in Pb-Zn, Cu, As and Au-Ag veins.

• 한국표면공학회지
• /
• 제40권5호
• /
• pp.225-233
• /
• 2007

Effects of alloying elements on the corrosion layer formation of Pb-grid/active materials interface has been researched for improvement of corrosion resistance of Pb-Ca alloy. For this research, various amounts of alloying elements such as Sn, Ag and Ba were added to the Pb-Ca alloys and investigated their corrosion behaviors. Batteries fabricated by using these alloys as cathode grids were subjected to life cycle test. Overcharge life cycle test was carried out at $75^{\circ}C$, 4.5 A, for 110 hrs. with KS standard (KSC 8504). And then, after keeping the battery with open circuit state for 48 hr, discharge was carried out at 300A for 30 sec. Corrosion morphology and interface between Pb-grid and active materials were investigated by using ICP, SEM, WDX, and LPM. Corrosion layer of Pb-Ca alloy got thicken with increasing Ca content. For Pb-Ca-Sn alloy, thickness of corrosion layer decreased as Sn and Ag content increased gradually. In case of Pb-Ca-Sn-Ba alloy, thickness of corrosion layer decreased up to 0.02 wt% Ba addition, whereas, it was not changed in case of above 0.02 wt% Ba addition.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1782-1786
• /
• 2008

천안시 대기 입자 중 원소 성분의 분포 특성을 파악하기 위해, Cascade Impactor를 장착한 High Volume Air Sampler를 이용하여 대기 입자를 미세입자와 조대입자로 나누어 채취한 후, ICP를 이용하여 16개 원소의 농도를 측정하였다. 측정된 미세입자와 조대입자의 총 질량농도는 각각 평균 33.23, $20.66{\mu}g/m3$ 이었으며, 이 중 총 원소농도는 각각 1.27, $1.71{\mu}g/m3$으로, 전체 질량의 3.8%와 8.3%를 차지하여 조대입자에 원소성분이 상대적으로 많이 분포함을 나타냈다. 미세입자와 조대입자 모두 Fe, Al, Ti이 가장 높은 농도를 나나내는 원소였으며 Pb는 총 농도가 84.55ng/m3으로 국내 기준치를 만족하였다. Al을 기준원소로 분석한 Sc, Cr, Cu, Zn, As, Se, Sn, Pb의 농축계수가 미세입자에서 1,000이상을 나타냈는데, 이는 천안시 미세입자에 포함된 원소 성분의 주요 배출원이 인위적 배출원임을 시사한다.

• 자원리싸이클링
• /
• 제21권5호
• /
• pp.65-71
• /
• 2012

용융 PbO-$SiO_2$계 슬래그와 Bi를 $775{\sim}850^{\circ}C$의 마그네시아 도가니 중에서 평형시켜 Pb와 Bi의 평형분배에 대하여 조사하였다. 분위기 중의 산소분압은 $P_{CO2}/P_{CO}$의 비율을 조정하여 제어하였다. Pb의 분배비인 (%PbO)/[%Pb]는 슬래그 중의 $SiO_2$ 농도가 증가함에 따라 증가하였으며, Bi의 분배비인 ($%Bi_2O_3$)/[%Bi]는 슬래그 중의 $SiO_2$ 농도가 증가함에 따라 감소하였다. 그리고 반응 온도가 높을수록 금속 상중의 Pb 농도는 증가하였다. 이러한 결과는 열역학적으로 예측한 결과와 잘 일치하였다.