• Economic and Environmental Geology
• /
• v.40 no.3 s.184
• /
• pp.277-293
• /
• 2007

Seasonal and spatial variations in the concentrations of trace elements, pH and Eh were found in a creek watershed affected by mine drainage and leachate from several waste rock dumps within the As-Pb-rich Indae mine site. Because of mining activity dating back to about 40 years ago and rupture of the waste rock dumps, this creek was heavily contaminated. Due to the influx of leachate and mine drainage, the water quality of upstream reach in this creek was characterized by largest seasonal and spatial variations in concentrations of Zn(up to $5.830 mg/{\ell}$), Cu(up to $1.333 mg/{\ell}$), Cd(up to $0.031 mg/{\ell}$) and $SO_4^{2-}$(up to $173 mg/{\ell}$), relatively acidic pH values (3.8-5.1) and highly oxidized condition. The most abundant metals in the leachate samples were in order of Zn($0.045-13.909 mg/{\ell}$), Fe($0.017-8.730mg/{\ell}$), Cu($0.010-4.154mg/{\ell}$) and Cd($n.d.-0.077mg/{\ell}$), with low pH(3.1-6.1), and high $SO_4^{2-}$(up to $310 mg/{\ell}$). The mine drainage also contained high concentrations of Zn, Cu, Cd and $SO_4^{2-}$ and remained constantly near-neutral pH values(6.5-7.0) in all the year. While the leachate and mine drainage might not affect short-term fluctuations in flow, it may significantly influence the concentrations of chemicals in the stream. The abundance and chemistry of Fe-(oxy)hydroxide within this creek indicated that the Fe-(oxy)hydroxide formation could be responsible for some removal of trace elements from the creek waters. Spatial and seasonal variations along down-stream reach of this creek were caused largely by the influx of water from uncontaminated tributaries. In addition, the trace metal concentrations in this creek have been decreased nearly down to the background level at a short distance from the discharge points without any artificial treatments after hydrologic mixing in a tributary. The nonconservative(i.e. precipitation, adsorption, oxidation, dissolution etc.) and conservative(hydrologic mixing) reactions constituted an efficient mechanism of natural attenuation which reduces considerably the transference of trace elements to rivers.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.74-80
• /
• 2001

Purpose : Irradiation cones by using backscatter electrons are made for the treatment of superficial small lesions of skin, oral cavity, and rectum where a significant dose gradient and maximum surface dose is desired. Methods and Materials : Backscatter electrons are produced from the primary electron beams from the linear accelerators. The design consists of a cylindrical cone that has a thick circular plate of high atomic number medium (Pb or Cu) attached to the distal end, and the plate can be adjusted the reflected angle. Primary electrons strike the metal plate perpendicularly and produce backscatter electrons that reflect through the lateral hole for treatment. Using film and a parallel plate ion chamber, backscatter electron dose characteristics are measured. Results : The depth dose characteristic of the backscatter electron is very similar to that of the hard x-ray beam that is commonly used for the intracavitary and superficial lesions. The basckscatter electron energy is nearly constant and effectively about 1.5 MeV from the clinical megavoltage beams. The backscatter electron dose rate of $35\~85\;cGy/min$ could be achieved from modern accelerators without any modification. and the depth in water of $50\%$ depth dose from backscatter electron located at 6mm for $45^{\circ}$ angled lead scatter. The beam flatness is dependent on the slit size and the depth of treatment, but is satisfactory to treat small lesions. Conclusions : The measured data for backscatter electron energy, depth dose flatness dose rate and absolute dose indicates that the backscatter electrons are suitable for clinical use.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.190-198
• /
• 2008

There is an increasing concern over heavy metal contamination of paddy soils and the subsequent translocation of heavy metals to rice. Objective is to monitor the status and long-term trend of heavy metal contamination in paddy soils, periodically. In 2007 survey, the average concentrations of As(arsenic), Cd(cadmium), Cu(copper), Ni(nickel), Pb(lead), and Zn(zinc) in 2,010 paddy soils nationwide were 0.87, 0.08, 3.33, 1.19, 4.95 and $4.67mg\;kg^{-1}$, respectively. Few sites, which were contaminated by As in 2003 and 2007 survey and by Ni in 1999 and 2007 survey, were over the threshold level for soil contamination designated by the Soil Environmental Conservation Act in Korea. Long-term change was shown that As, Ni, and Zn were gradually increased whereas Cd and Cu were decreased. In the distribution of extractable heavy metal contents, the modes of each heavy metal content were similar with the average contents of each heavy metals. Mean value of heavy metals except copper in paddy soils was higher than median value. It means that the downward distribution of heavy metal content in paddy rice was shown against normal distribution.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.95-101
• /
• 2024

In this study, we investigated the migration level of items specified in the Korean Standards and Specifications for Utensils, Containers, and Packages (Ministry of Food and Drug Safety Notification) for 50 utensils and hygiene products made of biodegradable resins. Our results revealed that one Polylactide (PLA) baby tableware contained 20 mg/L in consumption of potassium permanganate, exceeding the standard of 10 mg/L or less. In all other samples, formaldehyde, lead (Pb), and arsenic (As) levels could be considered very safe and remained below the standard. Moreover, we tested the PLA baby tablewares (n = 21) for migration into a food simulant (4% v/v acetic acid) upon repeated elution at 100℃ for 30 min or UV irradiation for 2 h. We detected increased formaldehyde and As amounts at the repeated 100℃ treatment for 30 min compared to those upon repeated UV irradiation. However, the migration level was markedly low under both conditions. Furthermore, the Estimated Daily Intake (EDI) calculated on an infant-to-child basis from the formaldehyde and As migration at 100℃ for 30 min in the PLA sample was at the maximum value, i.e., 6.0×10^-4 mg/kg b.w./day and 1.3×10^-1 ㎍/kg b.w./day, corresponding to 0.40% and 10.42% of the Tolerable Daily Intake (TDI, 0.15 mg/kg b.w./day) and Provisional Tolerable Weekly Intake (PTWI, 9.0 ㎍/kg b.w./week), respectively. Therefore, in this study, we confirmed that biodegradable synthetic resins are safe to use for food.