• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.484-484
• /
• 2013

기존 진단용 Digital X-ray Detector이 직접방식에서는 a-Se (Amorphous Selenium)이 대중화되었지만 고전압을 인가하여야한다는 점과 그로 인한 물질 자체의 Life time 감소 등 여러 단점들 때문에 기타 후보물질들로 HgI2, PbI2, PbO, CdTe, CdZnTe가 연구 되고 있다. 이러한 후보 물질들 중 본 연구에서는 PVD (Physical Vapor Deposition)방식을 이용하여 Polycrystalline CdTe 박막을 제작하고 특성 향상을 위해 유전물질을 Passive layer와 Protect layer로써 증착하였다. 또한 유전체층의 위치에 따른 특성 분석을 위해 제작된 박막은 FE-SEM (Field Emission Scanning Electron Microscope), XRD (X-ray Diffraction)을 통해 구조적인 특성을 확인하였다. 그리고 입사되는 X-ray 선량에 의해 생성되는 전기적 특성을 분석하였다, 그 결과 박막의 Grain Size는 약 $5{\mu}M$이며 (111)방향의 주 peak를 띄는 Poly CdTe형태로 증착된 것을 확인하였다. 전기적인 신호 결과 Passive layer와 Protect layer를 증착한 박막 모두 Darkcurrent가 감소된 것을 확인하였다. 또한 Sensitivity 측정 결과 Passive layer를 삽입한 경우 신호 값이 감소하였으며 Protect layer를 삽입한 경우 신호 값의 변화가 일어나지 않았다. 그러므로 Protect layer를 등착한 박막의 경우 SNR이 현저히 높아지는 결과를 낳았다.

• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1066-1072
• /
• 1999

The present study was carried out to investigate the blood markers of Cheju horses. The red cell types (blood groups) were tested from 73 Cheju native horses and 118 Cheju racehorses by serological procedures with 23 reagents. The blood group phenotypes observed with high frequency were Pb(34.3%), Qc(56.2%), Qb(15.1%) and genotypes Dbcm/dghm(12.3%), Dde/dghm(9.6%), Dad/bcm(6.8%), Dcgm/de(6.8%) in Cheju native horses, while Aa(63.6%), Pa(44.9%), P-(28.8%), Qabc(36.4%), Dbcm/cgm(14.4%), Dbcm/bcm(10.2%), Dbcm/de(7.6%), Dbcm/dghm(5.1%), Dde/dk(5.1%) in Cheju racehorses. Alleles observed with high frequency were Ab(0.128), Ac(0.169), Dad(0.103), Dadn(0.075), Ddghm(0.226), Pb(0.316), Qc(0.494) in Cheju native horses and Aa(0.529), Dbcm(0.306), P-(0.531), Qabc(0.197), Q-(0.504) in Cheju racehorses. No specific variation of blood groups and allele frequencies of C,K,U system were observed in Cheju native horses and Cheju racehorses. The mean heterozygosity in Cheju native horses and Cheju racehorses was observed 0.5344 and 0.5102, respectively.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.484-490
• /
• 1999

$(Pb,La)TiO_3$(PLT) thin films were prepared on Pt/SiO$_2$/Si substrates by the sol-gel method and investigated the crystalline and electrical properties according to La concentration and post-annealing temperatures. The PLT films annealed at above $600^{\circ}C$ were exhibited the typical perovskite structures regardless of La contents. When the $(Pb,La)TiO_3$(PT) films were doped with La concentration up to 10mol%(PLT-10), the degree of z-axis orientation was greatly decreased from 63% to 26%. From AES depth profiles for the PLT-10 samples, no remarkable inter-reaction between PLT film and lower Pt electrode was found. The remanent polarization$(2Pr,Pr_+-Pr_-)$ were increased from $4\muC\textrm{cm}^2 to 16\muC\textrm{cm}^2$ as the annealing temperature increased from $600^{\circ}C to 700^{\circ}C$. This result may be ascribed to the improvement of crystallinity by the high temperature post-annealing. The dielectric constant$({\varepsilon}r)$ and tangent loss(tan$\delta$) of the PLT-10 films annealed at $650^{\circ}C$ were about 193 and 0.02, respectively with the pyroelectric coefficient($\gamma$) of around $4.0nC/\textrm{cm}^2{\cdot}^{\circ}C at 30^{\circ}C$.

• Economic and Environmental Geology
• /
• v.12 no.2
• /
• pp.51-73
• /
• 1979

The zinc-lead deposits at the Yeonhwa I mine were investigated in terms of ore-forming geologic setting, structural style of ore control, geometry of individual orebodies, zoning, paragenesis and chemical composition of skarn minerals, as well as metal grades and ratios of selected orebodies. The Yeonhwa I mine is characterized by a large swarm of chimney type massive orebodies with thin skarn envelopes, boldly developed through a thick sequence of Pungchon Limestone, the overlying Hwajeol Formation, and the underlying Myobong Slate of Cambrian age. Nearly 20 orebodies of similar shape, but of varying size are arranged in a V-shaped pattern with northwest and northeast trends, clearly indicating an outstanding ore control by a conjugate system of fractures with these trends. Important orebodies are the Wolam 1, 2, 3, and 5 orebodies in the west, and the Namsan 1, 2, 3. and 5 orebodies in the east, among others. The Wolam 1 orebody, which was observed from the -360 level through the -240, -120, and 0 levels to the surface outcrops (totaling a vertical height of about 500m), shows a vertical variation in skarn mineralogy, ranging from pyroxene-garnet zone on the lower levels. through pyroxene (without garnet) zone on the intermediate levels, and finally to rhodochrosite vein on the upper levels and surface. Microprobe analyses of pyroxene and garnet on a total of 14 mineral grains revealed that pyroxenes are manganoan salitic in most samples, with downward increase of Fe and Mn, whereas garnets are highly andraditic, containing fractions of subordinate grossular with downward decrease of Fe. This indicates a reverse relationship of Fe-contents between pyroxene and garnet with depth. Ore minerals are major sphalerite, subordinate galena, and minor chalcopyrite. Sulfide gangue minerals include major pyrrhotite, and minor pyrite and marcasite of later age. Two types of variational trends in metal grades and ratios with depth are present on the plots of assay data from the Wolam orebodies: one is a steady upward increase in Pb, Zn, and Pb:Zn ratios, with a terminal decline at the top of orebody: the other is an irregular or sinusoidal change. The former is characteristic of chimney-type orebodies, whereas the latter is of vein· shaped orebodies. The Pb grades show large variations among orebodies and from level to level, whereas the Zn grades are relatively constand or less variable.

• Journal of Distribution Research
• /
• v.17 no.5
• /
• pp.85-111
• /
• 2012

Introduction : The purpose of this study was to examine the relationship between perceptual characteristics of consumers and intent of relational continuance for PB(Private Brand) products in discount stores. This study was conducted as an empirical study based on survey. For the empirical study, factors of PB products as characteristics perceived by consumers such as perceived quality, store image, brand image and perceived value were deduced from preceding studies. The effect of such factors on intent of relational continuance mediated by brand trust and brand equity of PB products was structurally examined. Research Model : Based on theory analysis and hypotheses, constructed a Structural Equation Model(SEM). The research model is shown in Figure 1. Research Method : This paper is based on s qualitative study of selected literature and empirical data. The survey for empirical study was carried out on consumers in Gyeonggi and Busan between January 2012 and May 2012. 300 surveys were distributed and 253 (84.3%) of them were returned. After excluding omissions and insincere responses, 245 surveys (81.6%) were used for final analysis as effective samples. Result : First of all, the Reliability was carried out for instrument used. The lower limit of 0.7 for Cronbach's Alpha as suggested by Hair et al. (1998). And Construct validity was established by carrying out exploratory factor analysis by Varimax rotation for all. Four factor result for the consumer's perceptual characteristics of PB Products, two mediating factors and one dependent factor. All constructs included in research framework have acceptable validity and reliability. Table 1 shows the factor loading, eigen value, explained variance and Cronbach's alpha for each factor. In order to assure validity of constructs, I implemented Confirmatory Factor Analysis (CFA), using AMOS 20.0. In confirmatory factor analysis, researcher can take control over the specification of indicators for each factor by hypothesizing that a specific factor is loaded with the relevant indicators. Moreover, CFA is particularly useful in the validation of scale for the measurement of specific construct. CFA result summarized Table 2 shows that the fit measures of all constructs fulfill the recommended level and loadings are significant. To test causal relationship between constructs in the research model, used AMOS 20.0 that provides a graphic module as method for analysing Structural Equation Modeling. The result of hypothesis test is shown in Table 3. As a result of empirical study, perceived quality, brand image and perceived value as selected attributes for PB products showed significantly positive (+) effect on brand trust and brand equity. Furthermore, brand trust and brand equity showed significantly positive (+) effect on intent of relational continuance. However, store image of discount stores selling the PB products was analyzed to have positive (+) effect on brand trust and no significant effect on brand equity. Discussion : Based on the results of this study, the relationship between overall quality, store image, brand image and value perceived by consumers about PB products and intent of relational continuance was structurally verified as being mediated by brand trust and brand equity. Looking at the results, a strategic approach that maximizes brand trust and equity value for PB products by large discount stores is required on top of basic efforts to improve quality, brand image and value of PB products in order to maximize consumer's intent of relational continuance and to continuously attract repeated purchase of products.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.2
• /
• pp.242-257
• /
• 2000

This study was to investigate the metal accumulation from Ohjeoksan-Decoction to rat brain(Sprague Dawley). 1. In Control group, each metal concentration was within 26.65mg/kg. and in each experimental groups, was within 28.39mg/kg. And there were no significant metal concentration between control and experimental groups. Exceptionally, Cr and Ni level of control group was lower than experimental groups significantly. (p<0.05) and Cr and Ni level of experimental I group was lower than other experimental groups too. (p<0.05). But, Pb level of control group was higher than experimental groups significantly (p<0.05) Pb level of experimental I group was higher than other experimental groups(p<0.01) 2. In non-hazardous, hazardous and total metal concentration, there was no increase tendency in brain according to the high dose of OD(Ohjeoksan-Decoction) intake. Reversely, in experimental groups, hazardous metal concentration was decrease by high OD intake. (P<0.05) 3. Correlation among each metal in brain was various in each groups Briefly under the intake of Ohjeoksan-Decoction, that if very busy herb prescription , this study was defined within safety in brain metal level by P.O. during 10 days. But, there should be a more research about Pb increase by high dose OD intake

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.6
• /
• pp.703-710
• /
• 2009

The spectral irradiance and underwater transmission characteristics of a combined high-luminance light-emitting diode (LED) lights have been studied to evaluate suitable light sources for fishing lamps of the next generation. The wavelengths at which the irradiance was maximum were changed from 473, 501, 525, and 465 nm for blue, peacock blue, green, and white LED light to 475, 504 and 528 nm for [$F_{WB}$], [$F_{PB}$] and [$F_{GB}$] combined LED lights, respectively. If the irradiance characteristics at 400-700 nm wavelengths are set as 100%, the irradiance rates at 450-499 nm and 500-549 nm were decreased from 82.4% and 56% for blue, peacock blue LED light to 60.0%, 38.5% for [$F_{WB}$], [$F_{WP}$] combined LED lights. The underwater transmission characteristics of the combined LED lights were superior in the order [$F_{WB}$], [$F_{BP}$], [$F_{GB}$] in optical water type I; [$F_{WB}$], [$F_{PB}$], [$F_{GP}$] in optical water type II-III; and [$F_{GP}$], [$F_{WP}$], [$F_{PB}$] in optical water type 1. Setting the 10m depth underwater transmission characteristics of the combined LED lights in optical water type I at 100%, the transmission of water types II, III and 1 drops to 29.5%, 8.0% and 2.2%. Based on the distribution of spectral irradiance and underwater transmission characteristics calculated in optical water types II-III, where was the jigging ground for fishing lamps, the [$F_{WB}]$ and [$F_{GP}$] combined LED lights can be used as a suitable light sources for fishing lamps of the next generation.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.73-73
• /
• 2000

Shear strength of BGA solder joints on Cu pad was studied for Cu-contained Sn n.5 a and 2.5wt.% Cu) and Sn-Pb (o.5wt.% Cu) solders, with emphasis on the roles of the C Cu-Sn intermetallic layer thickness and the roughness of the interface between the i intermetallic layer and solder. The shear strength test was performed both for a as-soldered s이der joints with soldering reaction times of 1, 2, 4 min and for aged s이der j joints at 170 C up to 16 days. The Cu addition to both pure Sn and eutectic Sn-Pb s solders increased the intermetallic layer thickness at both soldering and aging t temperatures. The Cu addition also resulted in changes in the roughness of the interface b between the intermetallic layer and solder at as-soldered states. With increasing Cu c content. the interface roughened for Sn-Cu solders whereas it flattened for Sn-Pb-Cu s solders. The shear fractures in all solder joints investigated were confined in the bulk s solder rather than through the intermetallic layer. Therefore, the effect of Cu content in s solders on the shear strength of the solder joints was primarily attributed to its i influence on the micros$\sigma$ucture of bulk solder, such as the size and spatial distributions of CU6Sn5 precipitates. In addition, the critical intermetallic layer thickness for a m maximum shear strength seemed to depend on the Cu content in bulk solder.older.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.271-282
• /
• 1993

This study was conducted to investigate the absorbing and/or filtering capacity of woody landscape plants growing in urban and industrial regions of Seoul and Taejon. Korea. Total sulfur content and heavy metal content were analyzed in tree foliage of Pinus densiflora, Pinus koraiensis, Ginkgo biloba. Liriodendron tulipifera, Platanus occidentalis. The total sulfur content in the leaves of woody landscape plants in Seoul and Taejon were remarkably higher than those of the tree leaves in Kwangreung. The total sulfur content of deciduous trees had 2.6 times more than that of coniferous trees. the former had better absorbing capacity of $SO_2$ gas. Especially Ginkgo biloba and Platanus occidentalis were recommanded as absorption trees of $SO_2$ because sulfur content levels of them were the highest among all species and increased until tall coloration. While coniferous trees showed no changes in total sulfur content between four seasons. deciduous trees increased in sulfur during the growing season. Pb content of all species in polluted area were higher than those in unpolluted area. In polluted area, while coniferous trees had higher absorption and accumulation of Pb, deciduous trees had higher absorption of Zn. The content of Pb, Zn and Cu in needle of Pinus koraiensis were more than those of Pinus densiflora, In Pinus koraiensis and Pinus densiflora, heavy metal content in the 2nd year needle were higher than thous in the current year needle. In Pinus densiflora, Pinus koraiensis Liriodendron tulipifera and Platanus occidentalis there was a positive correlation between total sulfur and heavy metals [(Pb+Zn+Cu)/3] content.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.21-25
• /
• 1998

We investigated the optical properties of lead zirconate($PbZrO_3$, PZ) thin films. The PZ films for the measurement of optical properties were prepared on ITO glass by sol-gel method. By post annealing, with annealing temperature $T=700^{\circ}C$, the pyrochlore phase of as-deposited specimen was transformed into the perovskite phase. The surface of films were plat, transmittance were from 60 to 80% at 480~2000nm, and refractive index were from 2.1 to 1.9 at 480~1000nm.