• 센서학회지
• /
• 제29권6호
• /
• pp.388-393
• /
• 2020

In this study, a PbS quantum dots (QDs)-based H₂ gas sensor with a Pd electrode was proposed. QDs have a size of several nanometers, and they can exhibit a high surface area when forming a thin film. In particular, the NH₂ present in the ligand of PbS QDs and H₂ gas are combined to form NH₃⁺, subsequently the electrical characteristics of the QDs change. In addition to the resistance change owing to the reaction between Pd and H₂ gas, the resistance change owing to the reaction between the NH₂ of PbS QDs and H₂ gas increases the current signal at the sensor output, which can produce a high output signal for the same concentration of H₂ gas. Using the XRD and absorbance properties, the synthesis and particle size of the synthesized PbS QDs were analyzed. Using PbS QDs, the sensitivity was significantly improved by 44%. In addition, the proposed H₂ gas sensor has high selectivity because it has low reactivity with heterogeneous gases such as C₂H₂, CO₂, and CH₄.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.712-718
• /
• 1989

PMN ceramics with excess MgO addition in the range of 0 to 70m/o were prepared, and their electrical properties, such as dielectric constant, tan$\delta$, diffuseness coefficient, remanent polarization, coercive field and electrical conductivity were measured. Dielectric constant and remanent polarization increased with up to 5m/o excess MgO and then decreased presumely due to the precipitation of second phase, etc. Electrical conductivity slightly increased with the addition of excess MgO.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.1046-1054
• /
• 2001

적층일체형 RF 수동소자 모듈 구현을 위한 저온소결 유전체로의 사용을 위해 B$_2$O$_3$ 및 CuO의 첨가가 PbWO$_4$-TiO$_2$계 세라믹의 고주파 유전특성에 미치는 영향을 조사하였다. 본 연구자는 PbWO$_4$가 8$50^{\circ}C$에서 소결이 가능하고 우수한 유전특성($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz, $ au$$_{f}$ =-31 ppm/$^{\circ}C$)을 보여 LTCC 재료로의 응용가능성이 있다고 판단하였다. 이에 PbWO$_4$의 $\tau$$_{f}$ 조절을 위해 TiO$_2$를 첨가하여 8$50^{\circ}C$에서 소결한 결과 TiO$_2$의 함량이 8.7 mol%일 때 $\tau$$_{f}$ 를 +0.2ppm/$^{\circ}C$로 조절할 수 있었고, 이때 $\varepsilon$$_{r}$ 및 Q$\times$f$_{0}$ 값은 각각 22.3과 21400GHz이었다. TiO$_2$첨가량 증가에 따른 Q$\times$F$_{0}$ 값의 감소는 결정립 크기 감소에 의한 것이었다. Q$\times$f$_{0}$ 값의 개선을 위해 다양한 량의 CuO 및 B$_2$O$_3$를 첨가한 결과, 최적의 유전특성을 얻기 위해서는 적정량의 첨가량이 필요함을 알 수 있었다. CuO 첨가의 경우 유전특성 개선을 위한 최적의 첨가량은 0.05 wt%이었고 이 조성을 8$50^{\circ}C$에서 소결한 결과, 얻어진 유전특성은 $\varepsilon$$_{r}$=23.5, Q$\times$f$_{0}$=32900 GHz, $\tau$$_{f}$ =-2.2 ppm/$^{\circ}C$이었다. B$_2$O$_3$첨가의 경우 최적의 첨가량은 1.0~2.5 wt%이었으며 8$50^{\circ}C$에서 소결한 경우 얻어진 유전특성은 $\varepsilon$$_{r}$20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$이었다.

• Transactions on Electrical and Electronic Materials
• /
• 제5권3호
• /
• pp.109-112
• /
• 2004

In this study, in order to develop the low temperature sintering ceramics for ultrasonic vibrator, Pb(Sb$\_$$\frac{1}{2}$/Nb$\_$$\frac{1}{2}$/) O$_3$-Pb(Ni$\_$1/3/Nb$\_$2/3/)O$_3$-Pb(Zr$\_$0.48/Ti$\_$0.52/)O$_3$ ceramics were manufactured as a function of the amount of CuO addition, and their dielectric and piezoelectric characteristics were investigated. With increasing CuO addition, the grain size and density increased up to 0.3 wt% CuO addition. Taking into consideration electromechanical coupling factor(k$\_$p/) of 0.53, mechanical quality factor(Q$\_$m/) of 423, dielectric constant($\varepsilon$$\_$r/) of 1,759 and piezoelectric constant(d$\_$33/) of 362pC/N, it could be concluded that 0.5 wt% CuO added composition ceramic sintered at 920$^{\circ}C$ was suitable for ultrasonic vibrator application.

• 한국전기전자재료학회논문지
• /
• 제28권5호
• /
• pp.332-337
• /
• 2015

We have studied the effects of Ag on the characteristics of $Sn_{60}Pb_{40}Ag_x$ (wt%) solder for photovoltaic ribbon. Ag atoms in the solder formed an alloy phase of $Ag_3Sn$ after reacting with some part of Sn atoms, while they did not react with Pb atoms, but decreased the mean size of Pb solid phase. The enhancement of peel strength between solar cell and ribbon is an important part in the developments of long-lifespan solar module. The peel strength of the solder ribbon of $Sn_{60}Pb_{40}$ (wt%) was $169N/mm^2$, and it was largely enhanced by adding a small amount of Ag atoms. The maximum peel strength was $295N/mm^2$ in the solder ribbon of $Sn_{60}Pb_{40}Ag_2$ (wt%). This result is caused by the high binding energy of 162.9 kJ/mol between Ag atoms in the solder and Ag atoms in Ag sheet.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.56-60
• /
• 2000

The mechanism of a matrix modification for the trace determination of volatile lead and bismuth by an electro-thermal atomic absorption spectrophotometry was studied by a X-ray diffractometry (XRD). For the investigation of structures, the ash products of the elements were produced by using a palladium as a matrix modifier with or without aluminum or nickel as an auxiliary modifier. The same charring conditions as in the analysis of samples were applied together with much concentrated solution of analytical elements and modifiers in a graphite furnace to get a large amount of the product for XRD. The XRD patterns showed PbPd3 for lead and BiPd3 for bismuth. These mean that the reaction procedures through the charring and atomization were changed from $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}$$Pb^0$ to $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}PbPd_3$ ${\rightarrow}$ Pb o for lead and from $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ Bi o to $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ $BiPd_3$ ${\rightarrow}$ $Bi^0$ for bismuth by the addition of modifiers. The volatile elements were stabilized by the formation of palladium alloys through a charring process. Charring temperatures were raised about 500 $^{\circ}C$ by the alloying and the atomization was also stabilized for the enhancement of sensitivities.

• 공업화학
• /
• 제4권2호
• /
• pp.273-283
• /
• 1993

티타늄마드래스 소지에 $PbO_2$를 전착하는 과정에서 전해액에 여러 가지 산과 유기물질의 첨가는 $PbO_2$전착층의 물성에 큰 영향을 준다. XRD결과 ${\beta}-PbO_2$가 산성 전해액에서 전착되는 것을 확인하였다. 본 실험에서 사용된 첨가제 중 전해액에 sodium lauryl sulfate를 첨가할때 산소과전압이 가장 높은 $PbO_2$가 전착되었으며 polyethylene glycol을 첨가할때는 염소과전압이 가장 낮은 $PbO_2$가 전착되었다. $PbO_2$의 산소과전압과 염소과전압은 $PbO_2$를 전착하는 동안 행하는 교반에 크게 의존한다. SEM결과 전착하는 동안 교반하지 않고 전착한 $PbO_2$결정이 교반하여 전착한 $PbO_2$보다 더욱 크다는 것을 관찰하였다. 또한 산성전해액에서 $PbO_2$를 전착할 경우, $PbO_2$결정 크기가 클수록 산소과전압은 커지며 $PbO_2$결정 크기가 작을수록 염소과전압은 낮아졌다. $HClO_4$의 존재하에서 $PbO_2$를 전착할 경우 560g/1 $Pb(NO_3)_2$, $65{\sim}70^{\circ}C$, pH>1에서 최적의 전착전류효율을 나타내었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.64-64
• /
• 2005

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.841-848
• /
• 1994

The sintering behavior of La-modified PbTiO3 ceramics was investigated in order to improve the poor sinterability of PbTiO3. Addition of La improved the sinterability. It was confirmed that this improvement was due to the decrease in tetragonality ratio c/a of crystal lattice. The variations of dielectric constant and pyroelectric coefficient were measured with temperature. It was observed that with the increase of La content, Curie temperature decreased and dielectric constant at room temperature increased. La-modified PbTiO3 ceramics had smaller pyroelectric figure of merits than those of pyroelectric materials in use. The effects of grain size on dielectric and pyroelectric properties were also investigated. The change of grain size had effect on maximum dielectric constant and pyroelectric coefficient, but is had little effect on pyroelectric figure of merit at room temperature. The closer examination near ferro-paraelectric phase transition temperature revealed that the behavior of phase transition approached a more relaxor character with the increase of La content and the decrease of grain size.

• 한국식품영양학회지
• /
• 제11권5호
• /
• pp.521-527
• /
• 1998

Removabilities of heavy metals(Cd and Pb) by the tea materials (barley-tea, corn-tea, jasmin-tea, brown rice-green tea, black-tea, cassia tora-tea, persimmon peel-tea, and rice-tea) in the tea-water were studied in the various conditions ; particle size of tea (20, 40, 70 mesh), concentration of heavy metal (25, 50, 100 ppm) and extraction temperature(20, 30, 50, 100$^{\circ}C$). The removabilities by the tea solids were increased as the particle size decreased, concentration of heavy metal increased, and extracting temperature increased. Of the nine kinds of tea, Cd and Pb removability by jasmin-tea was highest. In addition, heavy metal removability by cassia tora tea was better than that of other tea as extraction temperature was increased.