• Journal of Ecology and Environment
• /
• v.34 no.3
• /
• pp.315-322
• /
• 2011

We investigated the effect of Pb uptake by Pinus densiflora and the Pb fraction in forest soil. We also investigated the change in soil physicochemical characteristics, microbial activity, and root exudates of Pinus densiflora in Pb-contaminated soils. Three-year-old pine seedlings were exposed to 500 mg/kg Pb for 12 months. The metal fractions were measured using sequential extraction procedures. Additionally, factors that affect solubility (three soil enzyme activities and amino acids of root exudate compounds) were also determined. The results showed that Pb contamination significantly decreased enzyme activities due to soil characteristics. In addition, organic matter, nitrate content, and Pb concentration were time dependent. The results indicate that changes in the Pb fraction affected Pb uptake by pine trees due to an increase in the exchangeable Pb fraction. The concentrations of organic acids were higher in Pb-spiked soil than those in control soil. Higher rhizosphere concentrations of oxalic acid resulted in increased Pb uptake from the soil. These results suggest that pine trees can change soil properties using root exudates due to differences in the metal fraction.

• Applied Science and Convergence Technology
• /
• v.26 no.4
• /
• pp.70-73
• /
• 2017

The dielectric constant and loss of poling/non-poling was measured in the $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ samples. The addition of $La^{3+}$ to the $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ did not cause a large change in grain size. But the addition of $La^{3+}$ did show transition temperature, which shifted toward low temperature in the $Pb[(Mg_{1/3}Ta_{2/3})Zr]O_3$ systems. In addition, the dielectric and pyroelectric properties (${\varepsilon}{\sim}20000$, $p{\sim}0.03C/m^2K$) of this system using $La^{3+}$ have been greatly improved. Pyroelectrics $Pb_{0.97}La_{0.02}(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ system was found to have a relatively high ferroelectric FOMs ($F_V{\sim}0.035m^2/C$, $F_D{\sim}0.52{\times}10^{-4}Pa^{-1/2}$) at room temperature. Spontaneous polarization showed a value of $0.27{\sim}0.35C/m^2$ in the composition added to $La^{3+}$. The piezoelectric constant ($d_{33}=350{\sim}490pC/N$) and electromechanical coupling factor ($k_P=0.25{\sim}0.35$) are obtained in $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ compositions with $La^{3+}$ dopant.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.1-8
• /
• 2012

The success of stabilization treatment in heavy metal contaminated sediment depends on the heavy metal bioavailability reduction through the sequestration of the heavy metals. This study was performed to assess the changes in the bioavailability of Pb or Cd in the Pb or Cd contaminated sediments by using birnessite and hydroxyapatite as stabilizing agents. The toxicity tests were carried out using a microorganism (Vibrio fischeri), an amphipod (Hyalella azteca) and an earthworm (Eisenia foetida). With Vibrio fischeri, the toxicities of both Pb and Cd were reduced by more than ten times in the presence of birnessite and hydroxyapatite compared to that of in the absence of birnessite and hydroxyapatite. The concentrations of Pb and Cd in the contaminated sediments were lethal to Hyalella azteca, however, in the presence of birnessite and hydroxyapatite more than 90%, on average, of Hyalella azteca survived. With Eisenia foetida, the bioaccumulated concentrations of both Pb and Cd were reduced by more than 75%, on average, lower with the addition of birnessite and hydroxyapatite to the contaminated sediments. These results show that the addition of birnessite and hydroxyapatite can reduce the bioavailability of Pb and Cd in contaminated sediments. In addition, the in situ and ex situ performance of birnessite and hydroxyapatite as stabilizing agents can be verified using the toxicity tests with Hyalella azteca and Eisenia foetida, respectively.

• Journal of Distribution Science
• /
• v.21 no.2
• /
• pp.103-110
• /
• 2023

Purpose: The high-end and variety of recently released items are driving the growth of the distribution industry, which is the purpose of private brand (PB) products. Because PB shortens the distribution process and lowers marketing expenses, such as those associated with various commercials, more people will buy PB while paying lower retail prices. The goal of this study is to make the case that PB can be positioned successfully by determining the influence and direction of each individual constituent concept on how product and store attributes (perceived price, image of retail store) affect the perceived value of PB and the legitimacy of retailers. Research design, data and methodology: The gathered data were examined using PLS-SEM using Smart PLS 3.0 in order to analyze the research model of this study. Internal consistency was verified to demonstrate the measurement model's dependability, and extensive validity analysis, discriminant validity, and analysis were performed to verify the validity. Conclusion: This researcher attempted to gather diverse understandings and viewpoints on PB trends in addition to understanding the existing state of PB products. It is meant to be a unique and successful plan in the PB Brands' marketing strategy. By understanding the brand's value proposition aspects, it is hoped to determine how PB influences brand attitudes based on the findings of this study.

• Journal of the Korean Ceramic Society
• /
• v.30 no.8
• /
• pp.629-634
• /
• 1993

Dielectric and electrostrictive properties of 0.99Pb(Mg1/3Nb2/3)O3-0.01Pb(Mn2/3W1/3)O3 system using KCl-NaCl salts have been investigated as a function of the amount of excess MgO. For the specimens calcined at $700^{\circ}C$ for 1h and then sintered at 115$0^{\circ}C$ for 4h, the perovskite phase and the relative density were about 98% and 95%, respectively. With the addition of excess MgO up to 10mol%, the dielectric constant and the electrostrictive strain increased due to the increase of density and grain size, and these properties were degraded by the further addition of excess MgO. For the 10mol% excess MgO added specimen, the maximum electrostrictive strain, Xmax, and the electrostrictive coefficient, Q11, were 4.5$\times$10-4, 3.5$\times$10-2m4/C2, respectively. These results were correlated with the property of PMW and microstructure.

• Journal of the Korean Ceramic Society
• /
• v.30 no.11
• /
• pp.911-918
• /
• 1993

X-ray photoelectron spectroscopy(XPS) has been empolyed to investigate the structure of PbO-Bi2O3-Ga2O3 glasses. XPS OIS spectra recorded from binary PbO-Ga2O3 glasses clearly showed the presence of two peacks due to bridging and non-bridging oxygens, respectively. Gaussin best-fit deconvolution of the OIS peaks suggested there are substaintial amount of non-bridging oxygens in the structure. Therefore, in addition to the glassforming and charge compensating roles of PbO as suggested from the previous works, role of PbO as network modifiers needs to be considered. Addition of Bi2O3 to binary glasses resulted in the rapid decrease in the amount of non-bridging oxygens as well as in values of FWHM (Full Width at the Half Maximum intensity). It is believed that Bi2O3 form distorted BiO6 octahedra and therefore, work as intermediates. Infrared spectra also suggested that Ga2O3 behave as network-formers in the form of GaO4- tetrahedra.

• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.17-24
• /
• 1985

In the composition of $Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$ the effect of particle size on PbO vaporization were measured, . The initial step of discontinuous vaporization of unreated PbO during the calcining process was depended on the particle size. All additives $La_2O_3Nb_2O_5$ and $Al_2O_3$ inhibited the grain growth of the composition $Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$ +2wt% excess PbO. The dielectric and piezoelectric properties of the composition $Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$ were improved by the addition of 2wt% excess PbO and proper additive. The electromechanical planar coupling factor of 0.65 and mechnical quality factor of 390 could be obtained by adding 5wt% $Nb_2O_5$ to the composition 2wt% excess PbO+$Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$.

• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.934-942
• /
• 1990

The quarternary system ceramics 0.5[yPb(Zn1/3Nb2/3)O3-(1-y)Pb(Ni1/3Nb2/3)O3]-0.5[xPbTiO3-(1-x)PbZrO3](PZN-PNN-PT-PZ) was fabricated by the columbite precursor method to obtain a stabilized perovskite structure and by conventional method to evaluate the efficiency of the former methd. Dielectric and piezoelectric properties were investigated and the stability of the perovskite phase was studied as a function of PZN and PT contents and firing temperature. In the samples prepared by the columbite precursor method, the pyrochlore phase, which is detrimental to both the dielectric and piezoelectric properties, was not observed in the absence of PZN, and electric properties were improved even when fabricated at low temperature. By adding PZN, some pyrochlore phase appeared and the morphotropic phase boundary of the samples shifted to more Zr-rich composition. The temperature dependence of piezoelectric constant decreased with the addition of PZN, due to the rising of the Curie point.

• Human Ecology Research
• /
• v.51 no.6
• /
• pp.623-635
• /
• 2013

This study examined the extent of information needs regarding convenience store private brand (PB) foods and variables affecting information needs for convenience store PB foods. This study will be able to provide useful information based on determining the information content and information sources needed by undergraduate consumers for convenience store PB foods. Data analyses were conducted by frequency, mean (SD), reliability tests, and multiple regression with SPSS version 19.0. The major results of this study are as follows: First, undergraduate consumers' purchase intention toward convenience store PB foods is comparatively high, and they say they will buy the products if the PB foods' quality-related areas like taste, nutrition, or safety are favorable. Second, the general level of information needs for convenience store PB foods is comparatively high, and among general information needs, 'information needs for convenience store PB food quality' are the greatest, while in the area of comparative information needs, 'comparative information on PB food and NB food quality' is needed the most. In addition, undergraduate consumers most often want to obtain convenience store PB food information from convenience stores themselves. Third, as purchase intention and information acceptance of convenience store PB foods increase, information needs also increase. However, as quality perception of convenience store PB foods is more positive, information needs reduce.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.249-257
• /
• 1989

Dielectric properties and the stability of the perovskite phase in the Pb(Mg1/3Nb2/3)O3 system have been investigated as a function of amount of BaTiO3 and firing temperature. In the specimens fired at 120$0^{\circ}C$, the pyrochlore phase was eliminated by the addition of 10-15m/o BaTiO3 and also the dielectric constant increased. However, the dielectric constant decreased with further addition of BaTiO3 even though no pyrochlore phase was found to be present. The reducing tendency of the pyrochlore phase decreased with lowering the firing temperature in the system of Pb(Mg1/3Nb2/3)O3 with BaTiO3. Dielectric properties in PMN ceramics were affected by the character of the BaTiO3 rather than the pyrochlore phase.