• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.236-242
• /
• 1983

The purpose of present study is to find the structures physical properties and their inter-relations in the system of (60-x) PbO.xMO.$40B_2O_3$ glasses where MO represents for ZnO and CdO. The experiments such as differential thermal analysis infrared spectral analysis X-ray diffraction analysis density and thermal expansion measurements have been done. From infrared spectral analysis the structural units of glasses and the corresponding crystallized glasses were com-posed of $BO_3$ triangles and $BO_4$ tetrahedra. These basic units found in $PbO-B_2O_3$ binary glass system did not charge even though the divalent metallic oxides were substituted for PbO. The structures of these ternary glasses were more coalescenced than $PbO-B_2O_3$ binary glass system. This fact was supported bydecrease in thermal expansion coeffici-ent and molar volume with substitution of divalent metallic oxide for PbO. Crystalline phases obtained from the heat treatment of the $PbO-ZnO-B_2O_3$ glasses were 4PbO.2ZnO.$5B_2O_3$ PbO.2ZnO.$B_2O_3$ and unknown phases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.184-189
• /
• 2004

The effects of $Y_2$ $O_3$-substitution on the piezoelectric properties of Pb[(N $i_{1}$3/N $b_{2}$3/)$_{0.15}$(Z $r_{1}$2/ $Ti_{1}$2/)$_{0.85}$] $O_3$ceramics were investigated. It was found that $Y^{3+}$ ions incorporate into Pb-sites of the ceramics, resulting in a increased lattice anisotropy and formation of Pb-vacancies. As a result, an orthorhombic-tetragonal phase transition was induced when $\chi$>0.005. At the morphotropic phase boundary of x=0.005, piezoelectric constants( $k_{p}$, $k_{33}$, and $d_{33}$) showed maximum values of 0.53, 0.58, and 350pC/N, respectively. A 30-layer actuator fabricated with the above material showed a maximum strain of 0.12％ under 100V DC bias.

• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.434-439
• /
• 1997

It this paper, the piezoelectric and electro-induced strain properties of (P $b_{1-}$2x/3/B $i_{x}$ )[N $i_{1}$3/N $b_{2}$3/)$_{0.4}$( $Ti_{0.6}$Z $r_{0.4}$)$_{0.6}$] $O_3$ceramics (x=0, 0.005, 0.02) were investigated with the substitution of B $i^{3+}$, and the feasibility of the application for bimorph actuator was evaluated by measuring the dynamic properties of the piezoelectric bimorph fabricated with above ceramics. Dielectric constant was enhanced with the increase of B $i^{3+}$ substitution, and appeared the maximum value of 5032 at x=0.01 composition. Increasing the substitution of B $i^{3+}$, the electromechanical coefficient( $k_{p}$ , $k_{31}$ ) was increased up to the substitution of 0.5 mol% B $i^{3+}$, showed the value of 0.656, 0.439, respectively. The piezoelectric constant( $d_{33}$ $d_{31}$ ) had the highest value of 344, 825 with the substitution of 0.5 mol% B $i^{3+}$. The strain, generated by 60 Hz AC electric field, had the largest value of 1200($\times$10$^{-6}$ $\Delta$1/1) in the composition with the substitution of 0.5 mol% B $i^{3+}$. The dynamic properties of the bimorph actuator, fabricated with the composition substitution of 0.5 mol% B $i^{3+}$, showed the largest value of 325 $\mu$m at $\pm$150 V square pulse. square pulse.are pulse..

• Journal of the Korean Ceramic Society
• /
• v.36 no.10
• /
• pp.1108-1114
• /
• 1999

Microstructure and electrical properties of ZnO-doped (0-5 mol%) 0.05 Pb(Mn1/3Sb2/3)O3-0.95 PZT ceramics were investigated. Sintering temperature was decreased to 100$0^{\circ}C$ due to eutetic reaction between PbO and ZnO. Grain-size increased up to adding 1mol% ZnO and then decreased. Compositions of grain and grain-boundary were investigated by WDS. Lattice parameter was decreased with ZnO addition. Density increased with ZnO addition and reached to the maximum of 7.84(g/cm2) at 2 mol% ZnO. The effect of ZnO on electrical properties of PMS-PZT was investigated. At 3mol% ZnO addition electromechanical coupling factor(kp) was about 50% and relative dielectric constant($\varepsilon$33/$\varepsilon$0) was 997 Mechanical quality factor(Qm) decreased with ZnO addition. Lattice parameters and tetragonality(c/a) were measured to investigate relationship between the electric properties and substitution of Zn2+. At 3 mol% ZnO tetragonality was maximiged at c/a=1.0035 Curie temperature (Tc) decreased slightly with ZnO addition.

• Electrical & Electronic Materials
• /
• v.3 no.1
• /
• pp.20-28
• /
• 1990

Pb(Zr, Ti)O$_{3}$-Pb(Ni, Nb)O$_{3}$계 세라믹스에 Ba를 치완시켜 Ba치환량의 증가에 따른 유전율, 전기기계결합계수 및 압전 d정수의 변화를 고찰하였다. 또한 Ba치환에 따른 세라믹스 소자의 송신감도 특성을 조사하고 큐리온도 이동에 따른 온도안정성을 고려하여 초음파 송신기용 압전소자에 응용가능함을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.297-304
• /
• 1991

Dielectric hysteresis characteristics of Pb(Zr0.52Ti0.48)O3 ceramics have been investigated as a function of the amount of MnO2 addition ranged from 0.0 wt% in Pb(Zr0.52Ti0.48)O3 ceramics enhanced the dielectric strength, aging effect and remanent polarization, while reduced the coercive field. These results could be explained by the effect of Mn-Vo association due to the substitution of Mn for the (Zr, Ti) site in PZT.

• Electrical & Electronic Materials
• /
• v.10 no.1
• /
• pp.20-25
• /
• 1997

In this study, piezoelectric actuator samples were fabricated using 0.375PMN-0.37OPT-0.255PZ system ceramics with Barium substitution and the strain properties of them were investigated. Dielectric constant of the specimens increased with the increase of Ba content up to 5mol% and decreased with futher addition of Ba. The largest piezoelectric coefficient and electromechanical coupling coefficient were observed at the sintering temperature of 1250'C and Barium content of 5mol%. The characteristics of strain hysteresis was found largely with varing the sintering temperature on the single round type, and the strain is proportional to piezoelectric coefficient.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.20-25
• /
• 2001

To develop the piezoelectric actuator, the structural, dielectric and piezoelectric properties and electric fieldinduced strain of the ceramics(Pb$\_$1-2/Ba$\_$x/)[Mg$\_$1/2/W$\_$1/2/)$\_$0.03/-Ni$\_$1/3/Nb$\_$2/3/)$\_$0.12/-(Zr$\_$0.5/Ti$\_$0.5/)$\_$0.85/]O$_3$(x=0, 0.01, 0.03, 0.05, 0.07, 0.1) were investigated with the substitution of Ba. The tetragonality of crystal structure and grain size decreased by the substitution of Ba. Curie temperature decreased due to the decrease of the tetragonality, and dielectric constants increased with the substitution of Ba. The coercive field, remnant polarization and electromechanical coupling factor also decreased, whereas the piezoelectric constatns d$\_$33/ and d$\_$31/ were showed the highest value of 430 and 209(x10$\^$-12/C/N), respectively, because of the increase of dielectric constant. The strain induced by 60Hz AC electric field had the maximum value of 204x10$\^$-6/Δℓ/ℓ at the substitution of Ba 3mol%. As the applied electric field approaches to the coercive field, the piezoelectric element is depolarized and the electric field induced strain revealed non-linearity.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.1037-1043
• /
• 1994

The effects of annealing atmosphere and temperature on piezoelectricity (k33) and the mechanical strength of machined PZT was studied. Morphotropic Nb-doped PZT was sintered, machined to a rod and then annealed between 80$0^{\circ}C$ and 100$0^{\circ}C$ in air, PbZrO3, and CuO atmospheres respectively. In air or PbZrO3 atmosphere, the compressive strength of Nb-doped PZT increased by 12% with little change in k33 irrespective of annealing temperature. In CuO atmosphere, on the other hand, the compressive strength increased by 20% with little change in k33 at 80$0^{\circ}C$ but both turned to significant decrease above 90$0^{\circ}C$. The examination of the phase distribution and microstructure beneath the surface of CuO-treated PZT revealed that the changes in compressive strength and k33 are closely related to the reaction between PZT and vaporized CuO:liquid PbO precipitated in shallow surface region by the substitution of Cu to Pb sites enhances the decrease in microcracks and the surface roughness at 80$0^{\circ}C$ ; rapid evaporation of precipitated PbO expands a porous region of changed composition into the bulk above 90$0^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.60-63
• /
• 1997

Dieletric ailed piezoelectric properties of Pb[$Zr_{0.45}$/ $Ti_{0.5-x}$/L $u_{x}$ (M $n_{1}$3//S $b_{2}$3)$_{0.05}$] $O_3$(0$\leq$x $\leq$0.03) were investigated. The partial substitution of $Ti^{4+}$ by a L $u^{3+}$ permitted improvement of the piezoelectric constant( $d_{33}$ ), electromechanical coupling factor ( $k_{p}$ ) and dielectric constant($\varepsilon$$_{33}$ /Sup T/). The dielectric loss(tan $\delta$ ) increased and mechanical quality factor(Qm) decreased with an increase of x were observed. A new piezoelectric material for actuator application was developed at x=0.02 with $d_{33}$ =370$\times$10$^{-2}$ /C/N, $k_{p}$ =58.5%, $\varepsilon$$_{33}$ $^{T}$ =1321, $Q_{m}$ =714 and tan $\delta$ =0.98%.%..%.%.