• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.803-810
• /
• 1993

PbxZr0.4Ti0.6O3 thin films were prepared by reactive co-sputtering and annealed by RTA(Rapid Thermal Annealing) process. Effect of Pb content in PbxZr0.4Ti0.6O3 films on the phase transformation was intensively studied. It has been found out that depending on the Pb content as well as RTA temperature, crystal structure of PbxZr0.4Ti0.6O3 films change greatly. It turned out that transformation temperature for perovskite can be lowered and the width of transition temperature region was reduced by increasing Pb content in the film. And the lattice was expanded with increasing Pb content. With increasing RTA temperature, as-deposited phase was transformed into perovskite through three different transformation paths depending on Pb content. It was confirmed that activation energies for nucleation of perovskite structure are much larger than those of its growth.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.53-53
• /
• 2001

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.217-221
• /
• 1997

We have investigated the ferroelectric properties of multi-layered SrBi$_2$Ta$_2$$O_{9}$Pb(Zr,Ti)O$_3$, SBT/PZT, thin film capacitors. Specimens were prepared onto Pt-coated Si wafer by sol-gel method. Ferroelectric properties of these finns could be obtained only for thin SBT layers below 50nm in thickness. The values of dielectric constant and remnant polarization depend mainly on the thickness of SBT layer, which arises from the paraelectric interface layer between SBT and PZT due to the thermal diffusion of Pb. The value of remnant poarization of PZT/SBT is greater than that of SBT, and the plarization fatigue behaviors of PZT/SBT/Pt capacitors are somewhat improved as compared with those of PZT/Pt.t.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 추계학술발표회
• /
• pp.59-59
• /
• 1996

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 추계 학술발표강연 및 논문개요집
• /
• pp.69-69
• /
• 2001

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1301-1302
• /
• 2007

The multilayered $Pb_{1.1}(Zr_{0.4}Ti_{0.6})O_{3}$/$Pb_{1.1}(Zr_{0.6}Ti_{0.4})O_{3}/Pb_{1.1}(Zr_{0.4}Ti_{0.6})O_{3}$[PZT(4060)/(6040)/(4060)] thin films were deposited by RF sputtering method on the Pt/TiO2/SiO2/Si substrate. We investigated the effects of deposition conditions on the structural and electrical properties of the multilayered PZT thin films. All the multilayered PZT thin films showed dense and homogeneous structure without the presence of the rosette structure. The dielectric properties such as dielectric constant, loss, remanent polarization of the multilayered PZT thin film were superior to those of single composition PZT(4060) and PZT(6040) films, and those values for the multilayered PZT(10/20/10) thin film were 903, 1.01% and $25.60{\mu}C/cm^2$. This study suggests that the design of the multilayered PZT thin films capacitor with tetragonal and rhombohedral phase should be an effective method to enhance the dielectric and ferroelectric performance in devices.

• 한국재료학회지
• /
• 제10권10호
• /
• pp.684-690
• /
• 2000

Metal-Ferroelectric-Metal(MFM) 구조의 개퍼시터에서 $Pb(Zr,Ti)O_3(PZT)$-전극 계면층이 PZT 박막 특성에 기여하는 영향을 알아보기 위하여 Pt/PZT/계면층/Pt/$TiO_2/SiO_2$/Si 구조의 캐퍼시터를 제작하였다. 계면층으로 사용될 물질들 중에서 $PbTiO_3(PT)$ 층을 sol-gel 방법으로 형성하였으며, PbO, $ZrO_2,\;TiO_2$ 층들을 reactive sputtering 방법으로 형성하였다. PZT박막을 구성하는 원소들로 이루어진 단순 산화물들의 특성을 평가하기 위하여 PbO, $ZrO_2,\;TiO_2$를 계면층으로 사용하여 $600^{\circ}C$에서 열처리를 실시하였고, 이 경우에는 $TiO_2$가 가장 우수하게 PZT의 결정립 크기를 미세하게 하는 효과를 보였으나, 두께가 증가함에 따라 표면 거칠기가 증가하고 anatase 상으로 남기 때문에 강유전특성이 열화되었다. 반면에 PT 박막을 계면층으로 사용한 경우에는 결정립 크기의 감소와 더불어 전기적인 특성도 향상되었다. 또한 PZT의 핵생성 위치를 판단하기 위하여 PT 삽입층의 위치를 변화하며, 실험한 결과, 하부전극과 PZT 박막의 계면에 PT 삽입층을 형성하였을 경우에 가장 효과적인 seed로서의 역할을 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.67-69
• /
• 2004

The $Pb(Zr,Ti)O_3$ thin films were fabricated with $Pb(La,Ti)O_3$ buffers in-situ onto $Pt/Ti/SiO_2/Si$ substrates by pulsed laser deposition technique using a Nd:YAG laser with energy density of $2.5J/cm^2$, and deposited for 10 minutes at $550^{\circ}C$ of substrate temperature. And then, the films have been annealed at $550^{\circ}C$ in oxygen ambient pressure. The remanent polarization value is increased by using buffer layers but coercive field of films is slightly increased.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 추계총회 및 연구발표회 초록집
• /
• pp.79.2-79.2
• /
• 2004

• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1035-1039
• /
• 1999

Ferroelectric properties and reliability characteristics of(111) and (100) preferentially oriented tetragonal Pb(Zr0.2Ti0.8)O3 (PZT) thin film capacitors have been investigated as a function of the top electrode thickness. The (111) preferentially oriented film exhibits 180$^{\circ}$domain switching process with better squareness of hysterisis loop and abrupt change of small singal capacitance-voltage comparing to the (100) preferentially oriented film having 90$^{\circ}$ domain switching process. The domain swithcing process of tetragonal phase PZT is different from that of rhobohedral phase. The film with thinner top electrode shows less initial switching polarization due to less compressive stress but it exhibits better endurance characteristics due to enhancing partial switching region.