• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1239-1243
• /
• 1997

A phase analysis in the solid solution of (1-x) PbFe1/2Nb1/2O3-xPbCo1/2W1/2O3 is conducted by dielectric properties, heat capacity and E-P hysteresis at x=0.1 interval. Lattice constants and superlattice intensity are analyzed by the x-ray diffraction, and the temperature - composition phase diagram is determined. The system is found to form a solid solution of perovskite structure throughout the entire composition range, but the nature of phase transitions changes from ferroelectric-paraelectric for $0{\leq}x{\leq}0.5$ to antiferroelectric-paraelectric for $0.6{\leq}x{\leq}1.0$. The transitions of ferroelectric-paraelectric and antiferroelectric-paraelectric for $0.2{\leq}x{\leq}0.5$ and for $0.6{\leq}x{\leq}0.8$, respectively, are diffuse, while those of the ferroelectric-paraelectric and the antiferroelectric-paraelectric for $0.0{\leq}x{\leq}0.1$ and $0.9{\leq}x{\leq}1.0$, respectively are sharp.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1027-1032
• /
• 2002

(Pb$\_$0.4/Ca$\_$0.6/)(Fe$\_$1/2/Nb$\_$1/2/)O$_3$ system was modified by 10 mol% Pb(Zn$\_$1/2/W$\_$1/2/)O$_3$ addition and their sinterability and microwave properties were investigated as a function of the amount of flux (0.975PbO-0.025SnO$_2$). With increasing flux content, single perovskite phase was maintained up to 3 wt% flux addition and further addition led to the presence of Pb-rich second phase which was confirmed by EDS analysis. The apparent densities of PCFN-PZW specimen increased and showed maximum values at 2.5 wt% flux addition for the Ts=1000$^{\circ}C$ and 2.0wt% flux addition for the Ts=1050$^{\circ}C$, respectively. The dielectric constant and Q$.$f values strongly depended on the variation of density and microstructure, where the optimum values of $\varepsilon$$\_$r/ = 91.95, Q$.$f = 5938GHz, TCF = +8.15ppm/$^{\circ}C$ were obtained for the 2.5wt% flux added PCFN-PZW specimen sintered at 1000$^{\circ}C$ for 4h.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.747-749
• /
• 1992

In this study, $0.45Pb(Fe_{1/2}Nb_{1/2})O_3-(0.55-x)Pb(Fe_{2/3}W_{1/3})O_3-xPb(Mg_{1/3}Nb_{2/3})O_3(x=0.20, 0.25, 0.30)$ (x=0.20, 0.25, 0.30) ceramics were fabricated by the mixed oxide method. The sintering temperature and time were 950-990[$^{\circ}C$], 2[hr], respectively. The dielectric and structural properties with the composition and sintering temperature were investigated for the application as multilayer ceramic capacitors. To improve the dielectric loss, specimens doped with $MnO_2$, (0$\sim$2.0 [mol%] ) were fabricated and their dielectric properties were studied. With increasing the amount of $MnO_2$, dielectric constant was decreased and transition temperature was increased. Dielectric constant and dielectric loss of the 0.45PFN-0.30PFW-0.25PMN+$MnO_2$(1.0[mol.%]specimen(970[$^{\circ}C$]) had a good properties of 11,227, 1.3[%].

• The Korean Journal of Ceramics
• /
• v.1 no.2
• /
• pp.75-80
• /
• 1995

Development of phases, evolution of microstructures, and dielectric response characteristics of amorphous lead iron tungstates during crystabllization were investiageted. A series of mircographs showing the evolution sequence of microstructures is presented. Crystallization was observed to initiate from inside of the amorphous material. A cubic perovskite phase developed fully at $760^{\circ}C$ from amorphous state via intermediate metastable crystalline structures. Dielectric constant of amorphous PFM was totally insensitive to the temperature change around the Curie temperature of crystalline material. Sintered pellet, with relative density of 96% and an almost pore-free dense internal microstructure, could be prepared from amorphous powder.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.577-580
• /
• 2015

In this paper, in order to develop the composition ceramics with the outstanding piezoelectric properties, $Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3$ ceramics substituted with $BiFeO_3$ were prepared by the conventional solid-state reaction method. The addition of small amount of $Li_2CO_3$ and $CaCO_3$ as sintering aids decreased the sintering temperature of the ceramics. The effects of $BiFeO_3$ substitution on their piezoelectric and dielectric properties were investigated. when 0.015 mol $BiFeO_3$ was substituted, the optimal physical properties of $d_{33}=590pC/N$, $E_c=8.78kV/mm$ were obtained.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.309-325
• /
• 2004

The Cannington Ag-Pb-Zn deposit, northwest Queensland, Australia developed around the host rocks composing banded and migmatitic gneisses, sillimanite-garnet schist and amphibolite. Three crystal habits of sillimanite, gahnite (Zn-spinel) and garnet porphyroblasts occurred on the host rocks of the Cannington deposit could be used to delineate metamorphism that closely associated with Zn-mineralization in the deposit. Linkages the metamorphism to Zinc-mineralization is determined in four chemical systems, KFMASH (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$), KFMASHTO (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$-TiO$_2$-Fe$_2$O$_3$), NCKFMASH (Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$) and MnNCK-FMASH (MnO-Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$), using THERMOCALC program (version 3.1; Powell and Holland 1988). Partial melting in MnNCKFMASH and NCKFMASH systems occurs at lower temperature than in the KFMASH and KFMASHTO systems. The partial melting temperature decreases with increasing of Na/(Na+Ca+K) of the bulk rock compositions in the MnNCKFMASH system. The host rocks have melted ca 15 vol.% in the MnNCKFMASH system at peak metamorphic conditions (634$\pm$62$^{\circ}C$ and 4.8$\pm$1.3 kbar), but partial melting have not occurred in KFMASHTO system. Based on calculations of sillimanite isograd in different systems and sillimanite modal pro-portion, prismatic and rhombic sillimanite and gahnite porphyroblasts including prismatic sillimanite inclusion probably have resulted from pressure and temperature increasing through partial melting (from 550～$600^{\circ}C$, 2.0～3.0 kbar to 700～75$0^{\circ}C$, 5.0～7.0 kbar), furthermore have experienced N-S then W-E crustal shortening during D$_1$ and D$_2$ deformation. Consequently, Zinc mineralization related to gahnite growth occurred during D$_2$ and was redistributed and upgraded by partial melting and retrograde metamorphism into structural and rheological sites during shearing in D$_3$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.2041-2044
• /
• 2004

A pyroelectric sensor using $PbTiO_3$/P(VDF/TrFE) nanocomposites thin film for sensing materials has been fabricated and evaluated with other commercial pyroelectric sensors that use ceramic materials for sensing. The device was mounted in a TO-5 housing to detect infrared light of 5.5 ~ 14 ${\mu}m$ wavelength. The NEP (noise equivalent power) and specific detectivity D of the device were 1.30 ${\times}$ $10^{-8}$W and 1.53 ${\times}$ $10^7$cm /W respectively under emission energy of 13 ${\mu}$W/c$m^2$ respectively. This result shows a better characteristic than the other commercial pyroelectric infrared sensors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.218-218
• /
• 2008

최근 미관을 위하여 소형 네온관 등이 사용되고 있다. 따라서 네온관 등 구동에 사용되는 인버터는 안정기 역할을 하면서 소형화와 경량화가 중요한 요소이다. 본 연구는 압전 특성이 우수한 PZT계 세라믹스 조성인 $(Pb_{0.94}Sr_{0.06})[(Ni_{1/2}W_{1/2})_{0.02}(Mn_{1/3}Nb_{2/3})_{0.07}(Zr_{0.51}Ti_{0.49})_{0.91}]O_3$에 특성 향상을 위해 PbO, $Fe_2O_3$, $CeO_2$, Xwt% $Nb_2O_5$ 조성별로 첨가하였으며 그에 따른 유전, 압전 특성을 조사하고 또한 Rosen type의 압전 트랜스포머를 제작하여 각 조성별 변환효율을 측정하였다. 실험방법은 일반적인 세라믹스 제조공정으로 파우더 혼합 후 24시간 ball milling하고 $850^{\circ}C$ 에서 2시간 하소 후 $1230^{\circ}C$에서 2시간 소결하였다. 또한 최종 소결 시편을 이용하여 Rosen type의 압전 트랜스포머를 제작하였다. 상 분석을 위해 XRD를 이용하여 perovskite구조를 확인하고 미세구조확인을 위해 SEM으로 관찰하였다. 압전 특성을 평가하기 위해 압전 $d_{33}$ Meter를 사용하였으며, Impedence analyzer HP 4194A를 이용하여 전기적 특성을 측정하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1195-1199
• /
• 2003

In this study, in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, dielectric and piezoelectric properties of PSN-PZT[0.91Pb(Sb$\sub$1/2/Nb$\sub$1/2/)$\sub$0.03/(Zr$\sub$0.495/Ti$\sub$0.505/)$\sub$0.97/O$_3$-0.04Pb(Ni$\sub$1/2/W$\sub$1/2/)O$_3$+0.05BiFeO$_3$+0.3wt％MnO$_2$+0.6wt％CuO〕 ceramics were investigated according to Zr/Ti ratio. As Zr/Ti ratio is increased, electromechanical coupling factor(k$\sub$p/) and dielectric constant increased and then decreased after the ratio of Zr/Ti=50/50. Also, mechanical qualify factor(Q$\sub$m/) decreased and then increased after the ratio of Zr/Ti=50/50.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.27-35
• /
• 1998

EAF dust generated from electric arc steelmaking process is classified as "hazardous" materials by tbe environmental regulation because of the existence of water leachable heavy metals such as Fe, Zn, Pb, and Cd. However, Fe and Zn among t the elements in the dust can be recovered to high valuable materials by applying a proper process. Therefore, in order to study t the possibility of recovery of iron from EAF dust, the effect oE carbon content and basicity, of synthesized EAF dust on the reduction rate of iron oxide was studied. Experimental results are as follows: TIle softening and melting temperature of the slag w was illcreased with increasing carbon addition amount [or carbon reduction eqUIvalent. At the carbon addition amount of 100% for carbon reduction equivalent and basicity of 1.7, reduction rate of $Fe_2O$ in the slag was the highest. The reaction order fur reduction of $Fe_2O$ by carbon was nearly first order.