• Journal of Broadcast Engineering
• /
• v.23 no.5
• /
• pp.682-692
• /
• 2018

In this paper, we propose an ARQ packet error control scheme using multiple threads in delivering massive capacity of multimedia based on MMT(MPEG Media Transport) protocol. On the sending side, each frame that constitutes an image is packetized into MMT packets based on MMT protocol. The header of the packet stores the sequence number of the frames contained in the packet and the time of presentation information. The payload of the packet stores the direct information that comprises the frame. The generated MMT packet is transmitted to the IP network. The receiving side checks if any error has occurred in the received packet. For any identified error, it controls the error through ARQ error control scheme and reconfigure the frame according to the information stored in the header of the received packet. At this point, a multi-threading based transport design is constructed so that each thread takes over a single frame, which increases the transmission efficiency of massive capacity multimedia. The efficiency of the multi-threading transport method is verified by solving the problems that might arise when using a single-thread approach if packets with errors are retransmitted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.155-160
• /
• 2010

In this paper, we proposed a forensic mark algorithm which can embed the distributor's information at each distribution step to trace the illegal distribution path. For this purpose, the algorithm has to have the high capacity payload for embedding the copyright and user information at each step, and the embedded information at a step should not interfere with the information at other step. The proposed algorithm can trace the multilevel distribution because the forensic mark is generated by digital hologram and embedded in the DWT-SVD domain. For the high capacity embedding, the off-axis hologram is generated from the forensic mark and the hologram is embedded in the HL, LH, HH bands of the DWT to reduce the signal interference. The SVD which is applied the holographic signal enhanced the detection performance and the safety of the forensic mark algorithm. As the test results, this algorithm was able to embed 128bits information for the copyright and user information at each step. In this paper, we can embed total 384bits information for 3 steps and the algorithm is also robust to the JPEG compression.

• Ocean Systems Engineering
• /
• v.8 no.4
• /
• pp.427-439
• /
• 2018

Floating Production Storage and Offloading (FPSO) units have the advantages of their ability to provide storage and offloading capabilities which are not available in other types of floating production systems. In addition, FPSOs also provide a large deck area and substantial topsides payload capacity. They are in use in a variety of water depths and environments around the world. It is a good solution for offshore oil and gas development in fields where there is lack of an export pipeline system to shore. However due to their inherently high motions in waves, they are limited in the types of risers they can host. The Low Motion FPSO (LM-FPSO) is a novel design that is developed to maintain the advantages of the conventional FPSOs while offering significantly lower motion responses. The LM-FPSO design generally consists of a box-shape hull with large storage capacity, a free-hanging solid ballast tank (SBT) located certain distance below the hull keel, a few groups of tendons arranged to connect the SBT to the hull, a mooring system for station keeping, and a riser system. The addition of SBT to the floater results in a significant increase in heave, roll and pitch natural periods, mainly through the mass and added mass of the SBT, which significantly reduces motions in the wave frequency range. Model tests were performed at the Korea Research Institute of Ships & Ocean Engineering (KRISO) in the fall of 2016. An analytical model of the basin model (MOM) was created in Orcaflex and calibrated against the basin-model. Good agreement is achieved between global performance results from MOM's predictions and basin model measurements. The model test measurements have further verified the superior motion response of LM-FPSO. In this paper, numerical results are presented to demonstrate the comparison and correlation of the MOM results with model test measurements. The verification of the superior motion response through model test measurements is also presented in this paper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.948-956
• /
• 2011

In this paper, mechanism design of the explosive ordnance disposal(EOD) manipulator for small unmanned ground vehicle(SUGV) is presented from the conceptual to detailed design. EOD manipulator has been widely developed in the world due to the growing threat of the improvised explosive devices at war. It has distinctive characteristics, such as small size and high loading performance, compared to the industrial manipulator which is fixed on the floor. Design of new EOD manipulator must take into account various functional requirements and constraints simultaneously. We focused on developing the EOD manipulator that has suitable size for the SUGV and maximum 15kg payload capacity. Design approach taken in this paper is based on axiomatic design procedure and comparison among many possible candidates of each joint structure to obtain appropriate entire structure of EOD manipulator.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.939-944
• /
• 2007

Generally, development of a robot capable of fast movements or high payloads is progressed by the analysis of dynamic characteristics, DOF positioning, actuator selection, structure of links, and so on. This paper highlights the design of a robot manipulator handled by a human for man-machine cooperation. The requirements of the proposed system include its having multi-DOF(Degree of Freedom)and the capacity for a high payload in the condition of its maximum reach. The primary investigation factors are motion range, performance within the motion area, and reliabilityduring the handling of heavy materials. Traditionally, the mechanical design of robots has been viewed as a problem of packaging motors and electronics into a reasonable structure. This process usually transpires with heavy reliance of designerexperience. Not surprisingly, the traditional design process contains no formally defined rules for achieving desirable results, as there is little opportunity for quantitative feedback during the formative stages. This work primarily focuses on the selection of proper joint types and link lengths, considering a specific task type and motion requirements of the heavy material handling.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.871-880
• /
• 2000

A twin-servo mechanism is used to increase the payload capacity and assembling speed of high precision motion control systems such as semiconductor chip mounters. In this paper, we focus on the modeling of the twin-servo system and propose its network representation. And also, we propose a robust synchronizing motion control algorithm to cancel out the skew motion of the twin-servo system caused by different dynamic characteristics of two driving systems and the vibration generated by high accelerating and decelerating motions. The proposed control algorithm consists of separate feedback motion control algorithms for each driving system and a skew motion compensation algorithm. A robust tracking controller based on internal-loop compensation is proposed as a separate motion controller and its disturbance attenuation property is shown. The skew motion compensation algorithm is also designed to maintain the synchronizing motion during high speed operation, and the stability of the whole closed loop system is proved based on passivity theory. Finally, experimental results are shown to illustrate control performance.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.121-128
• /
• 2008

This paper describes the modeling and autopilot design procedure of a Blended Wing-Body(BWB) UAV. The BWB UAV is a tailless design that integrates the wing and the fuselage. This configuration shows some aerodynamic advantages of lower wetted area to volume ratio and lower interference drag as compared to conventional type UAV. Also, BWB UAV may be increase payload capacity and flight range. However, despite of these benefits, this type of UAV presents several problems related to flying qualities, stability, and control. In this paper, the detailed modeling procedure of BWB UAV and stability analysis results using the linearized model at trim condition are represented. Finally, we designed the autopilot of BWB UAV based on a simple control allocation scheme and evaluated its performance through nonlinear simulation.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.2
• /
• pp.100-106
• /
• 2013

This paper deals with the design method for a small waterproof 4-axis robot arm. An extensive analysis was performed on the torque applied to the robot joint as a result of the payload, as well as the design of the joint actuator capacity. In addition, a study was undertaken on the design of a waterproof joint actuator that works at depths greater than 10 m and the wiring design for a small waterproof connector to avoid obstructing the robot motion. Finally, a finite element method simulation was carried out to analyze the strength of the designed robot arm link, and its stability was verified through a simulation test.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.2
• /
• pp.113-119
• /
• 2006

Image steganography is a secret communication method used to transmit secret messages that have been embedded into an image. To accommodate a secret message in a digital image, the original cover image is modified by the embedding algorithm. As a result, a stego image is obtained. The sender hides the secret message in a cover image that has no meaning, and then transmits the stego image to the receiver. In this paper, we propose a steganographic method based on spatial domain to embed a secret message using a difference value of two consecutive pixels and a secret quantization range. Especially, we use the modular operation for increasing of insertion information. Through experiments, we have shown that the proposed method has much mon payload capacity, average 60 percent, than some existing methods by using modular operation.

• Journal of Drive and Control
• /
• v.21 no.1
• /
• pp.46-52
• /
• 2024

The advancement of autonomous driving technology has heightened the importance of Autonomous Mobile Robotics (AMR) within smart factories. Notably, in tasks involving the transportation of heavy objects, the consideration of weight in route optimization and path planning has become crucial. There is ongoing research on local path planning, such as Dijkstra, A^*, and RRT^*, focusing on minimizing travel time and distance within smart factory warehouses. Additionally, there are ongoing simultaneous studies on route optimization, including TSP algorithms for various path explorations and on minimizing energy consumption in mobile robotics operations. However, previous studies have often overlooked the weight of the objects being transported, emphasizing only minimal travel time or distance. Therefore, this research proposes route planning that accounts for the maximum payload capacity of mobile robotics and offers load-optimized path planning for multi-destination transportation. Considering the load, a genetic algorithm with the objectives of minimizing both travel time and distance, as well as energy consumption is employed. This approach is expected to enhance the efficiency of mobility within smart factories.