• Nuclear Engineering and Technology
• /
• v.41 no.1
• /
• pp.1-10
• /
• 2009

The safe and reliable performance of fusion and fission plants depends on the choice of suitable materials and an assessment of long-term materials degradation. These materials are degraded by their exposure to extreme conditions; it is necessary, therefore, to address the issue of long-term damage evolution of materials under service exposure in advanced plants. The empirical approach to the study of structural materials and fuels is reaching its limit when used to define and extrapolate new materials, new environments, or new operating conditions due to a lack of knowledge of the basic principles and mechanisms present. Materials designed for future Gen IV systems require significant innovation for the new environments that the materials will be exposed to. Thus, it is a challenge to understand the materials more precisely and to go far beyond the current empirical design methodology. Breakthrough technology is being achieved with the incorporation in design codes of a fundamental understanding of the properties of materials. This paper discusses the multi-scale, multi-code computations and multi-dimensional modelling undertaken to understand the mechanical properties of these materials. Such an approach is envisaged to probe beyond currently possible approaches to become a predictive tool in estimating the mechanical properties and lifetimes of materials.

• Journal of Gastric Cancer
• /
• v.15 no.2
• /
• pp.147-150
• /
• 2015

Gastric volvulus is an uncommon clinical entity. There are three types of gastric volvulus; organoaxial, mesenteroaxial and combined type. This condition can lead to a closed-loop obstruction or strangulation. Traditional surgical therapy for gastric volvulus is based on an open approach. Here we report a successful case of a patient with chronic gastric volvulus with a laparoscopic treatment. A 79-year-old woman came to the emergency department with epigastric pain accompanied by nausea for 2 weeks. Abdominal computed tomography revealed markedly distended stomach with transposition of gastroesophageal Junction and gastric antrum. Barium meal study revealed presence of the antrum was folded over 180 degrees that was located above gastroesophageal junction. We attempted an endoscopic reduction, but it was unsuccessful. The patient got laparoscopic anterior gastropexy. Based on our result, laparoscopic gastropexy can be considered as a good choice of the treatment for gastric volvulus.

• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.80-83
• /
• 2009

Purpose: A triple labral lesion represents a combination of injuries of the anterior, posterior and superior glenoid labrum. The injury mechanism and symptoms is not completely understood. Materials and Methods: We encountered a triple labral injury in a 39-year-old male complaining pain and active abduction difficulty after a motor vehicle accident. Currently, he does not complain any instability symptoms. The labrum was repaired using bio-absorbable suture anchors and a suture hook. Results: Eighteen months following surgery, the active range of motion was restored and he had no difficulty in his daily activities.

• Journal of Korean Philosophical Society
• /
• v.143
• /
• pp.47-65
• /
• 2017

This paper is an attempt to explain the interpretation of P. Ricoeur on the theory of power of Saint Paul. P. Ricoeur tried to reinterpret Saint Paul's thoughts on the power of a nation, the purpose being to link this theory to salvation through the social system. Ricoeur expands this interpretation of political power to the economy and culture. The basis of these ideas is the 'imago Dei' namely the image of God. I would like to consider the image of God as the key to salvation through social system, politics, economy, and culture.

• Journal of Distribution Science
• /
• v.18 no.12
• /
• pp.55-66
• /
• 2020

Purpose: For bakery retailers that want to enter the Chinese market, this study seeks to draw implications through the analysis of Paris Baguette, Paul Bakery and local competitors. In particular, the study analyzes entry strategies, as well as the advantages and disadvantages of the companies. Research design, data and methodology: This study analyzed the Chinese bakery industry and overviewed the policy of bakery industry. The research method utilized Chinese Statistical Yearbook of Food Industry and literature related to Chinese bakery industry. Additionally, this study used case analysis methods for foreign and local bakery enterprises in the bakery industry. Results: During the rapid growth of bakery industry, Paris Baguette made a successful settlement by utilizing localization strategy; while on the contrary, Paul Bakery took a standardization strategy and failed in the Chinese market. Conclusions: Paris Baguette succeeded in launching localized products after thoroughly analyzing products that suit local tastes in China. However, Paul Bakery has been knocked out of the Chinese market for failing to capture the taste of the Chinese people by launching standardized products that reproduce French culture and taste. As such, the Chinese market is huge and differences exist in different provinces, so standardization and localization strategies should be appropriately utilized.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4359-4372
• /
• 2022

Turbulent mixing in buoyant flows is an essential mechanism involved in many scenarios related to nuclear safety in nuclear power plants. Comprehensive understanding and accurate predictions of turbulent buoyant flows in the reactor are of crucial importance, due to the function of mitigating the potential detrimental consequences during postulated accidents. The present study uses URANS methodology to investigate the buoyancy-influenced flows in the reactor pressure vessel under the main steam line break accident scenarios. With a particular focus on the influence of turbulent heat flux closure models, various combinations of two turbulence models and three turbulent heat flux models are utilized for the numerical simulations of three ROCOM tests which have different characteristic features in terms of the flow rate and fluid density difference between loops. The simulation results are compared with experimental measurements of the so-called mixing scalar in the downcomer and at the core inlet. The study shows that the anisotropic turbulent heat flux models are able to improve the accuracy of the predictions under conditions of strong buoyancy whilst in the weak buoyancy case, a major role is played by the selected turbulence models with essentially a negligible influence of the turbulent heat flux closure models.

• American Studies
• /
• v.34 no.1
• /
• pp.181-202
• /
• 2011

The purpose of this paper is to examine Paul Auster's Leviathan according to Slavoj Žižek's theory. Analyzing the characters in Leviathan, this paper chiefly discusses the postmodern subject's anxiety and obsessive repetition that the lack of the big Other led to. Section II explains the disintegration of the big Other and the subject's anxiety and obsessive repetition by the interpretation of the characters: Peter Aaron, Maria Turner, and Benjamin Sachs. Aaron wants to write on Sachs's life to overcome his uneasy subject's condition, and to establish the consistent and whole world. But his writing fails to meet his desire, owing to uncertainty of his understanding, and the incompleteness of his writing. In case of Maria, her uneasy subject's condition led to her obsessively repetitive picture-shooting herself and others, which proved to be a meaningless struggle for filling the void of the big Other and herself. Although Sachs already knows the lack and inconsistency of the big Other, he also repetitively tries to establish the consistent and whole Other. In Section III, this paper examines Sachs's terror as he struggles for the preservation of the big Other. His extreme striving also fails to reestablish the big Other as it loses its symbolic effectiveness in the postmodern era because he does not grasp the big Other as an empty Symbolic order, and rejects the premise of the big Other itself.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2504-2515
• /
• 2023

In past years the Paul Scherrer Institute (PSI, Switzerland) and the Karlsruhe Institue of Technology (KIT, Germany)) collaborated to develop a model to account for the active role of nitrogen in the air oxidation of a Zircalloy cladding. The "PSI-KIT Nitriding Model for Zirconium based Fuel Cladding" model was implemented at PSI into PSI-MELCOR 1.8.6. In order to make a preliminary evaluation of the effect of the new model on the evolution of full-scale spent fuel pool accidents, one spent fuel pool event was analyzed using the PSI research version of PSI-MELCOR 1.8.6, which includes the nitriding model. To adapt an existing input deck for the calculations, a sensitivity study was conducted to find an optimal nodalization for the analyses. The nitriding model results were compared to those calculated with the MELCOR 1.8.6-PSI without the new nitriding model. The results demonstrate the effect of the nitriding reactions in spent fuel pool accident progression. Moreover, they confirm the impact of ZrN formation during cladding oxidation in air when the oxidation reactions lead to oxygen starvation inside the fuel assemblies. The nitriding reaction led to higher chemical heat generation during the accident and to an earlier failure of the cladding than when the effect of nitrogen reactions was not considered. It should be noted that the nitriding model, as implemented in the PSI version of MELCOR 1.8.6 has not yet been conclusively validated. Thereby the results presented in this paper should be treated as a preliminary demonstration of the capabilities of the model.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.2893-2905
• /
• 2024

Passive safety systems are integrated into the latest generation of Light Water Reactors (LWRs), including small modular reactors. This paper employs the US-NRC TRACE thermal hydraulic code to examine the performance of a passive safety condenser known as SACO, designed to serve as the ultimate heat sink for dissipating decay heat during accident scenarios. The TRACE model is constructed with reference to the PKL/SACO test facility. The safety condenser (SACO) is interconnected with the PKL facility via the secondary side of steam generator 1, effectively serving as a third natural circulation cooling loop during accident scenarios. In the present research, the thermal-hydraulic behavior of the PKL facility is investigated in the presence of the SACO passive safety system during an extended SBO with Loss of AC Power accident scenario. This SBO can be categorized into three distinct phases depending on the activation of the SACO system and the refilling process of the SACO pool. The first phase is depressurizing using primary and secondary relief valves, the second phase is cooling down using SACO system, and the third phase is the refilling of SACO pool. The findings indicate that the SACO system effectively manages to dissipate all decay heat, even though there is temporary evaporation of the SACO water pool. Furthermore, this study provides sensitivity analysis for the assessments of system codes on the selection of maximum time step.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.3
• /
• pp.3-8
• /
• 1984

It is shown that Paul and Jones' Rule of Mixtures modified by Smith and Cox's theory can be used for the fiber-reinforced, sulfur-based composites, when the constant for the linear regression equation is given. The computation results, programmed by Hewlett Packard 75C (HP 75C) using math rom pack for the linear regression form, expressed as $E_c=\frac{1}{3}aE_fV_f+bE_mV_m$, turn out to be a=3.27-3.54 b=-2.47~-2.80. This results indicate that the factors such as density of fiber mat and the amount of matrix used have nothing for affecting the numerical value of the constants a and b of the linear regression form. Conclusively this results also show that the Paul and Jones' Rule of Mixtures which has been used for the composites made by randomly-oriented long fiber can also be used for the composites made by short fiber with the same fiber orientation such as wood and lignocellulosic fibers.