• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.4
• /
• pp.474-482
• /
• 2006

Generally almost all fatigue crack growth is affected by mode I. For this reason a study on mode I has concentrated in the field of fracture mechanics. However the fatigue crack initiation and growth in machines and structures usually occur in mixed mode loading. If there is any relationship between the cause of fracture in mixed mode loading and fracture surface, fracture surface pattern will be the main mean explaining reasons of fatigue fracture and obtaining further information about fracture process. In this paper low point shear-fatigue test with Aluminum alloy hi 5083-O is carried out from this prospect and then the mixed mode distribution of fracture surface is examined from the result after identifying the generation of fatigue crack surface pattern. It was found from the experimental results that the fatigue crack surface pattern and the fatigue crack shear direction are remarkably consistent. Furthermore It is possible that the analysis of distribution of mixed mode through the fatigue crack surface pattern.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.233-242
• /
• 2012

The purpose of this study is to analyze the pattern of tenant layout for selected cases of five different Urban Entertainment Center(UEC) in Seoul. This research deals with the process of gaining tenant layout pattern of 40 different types. It is composed of three combination unit with tenants of the same or different consumption mode, which is divided into four different functions of retail, entertainment, dining, and service. Then, every tenant of research cases is classified as one of the fabric type, and the data is analyzed to gain its frequency rate with SPSS 14.0 program. The following is the overall explanation of the result for this research. The frequency of tenant layout pattern between the same consumption mode shows the high rate when compared to the other patterns with different consumption mode. For example, the frequency rate of tenant layout pattern which retail and dining consumption mode are placed side by side like RRR and DDD is high. Interestingly, the frequency rate of RRR type of tenant layout pattern that sells the similar products shows especially high level. It can provide the effective environment for shoppers to compare retail goods in many different stores as producing synergic effects when they are located near each other, so this strategy should be considered when planning tenants in UEC environment. Moreover, in case of dining tenants, when they are clustered together in the UEC environment it can play a role as an anchor tenant. Tenant layout pattern of dining-retail and dining-service consumption mode shows the high frequency rate than other layout pattern with other consumption mode. Besides, entertainment consumption tenants combined with dining or retail tenants show the high frequency rate when compared to the pattern combined with service consumption mode.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.43-44
• /
• 2006

Generally almost all fatigue crack growth is affected by model. For this reason a study on model has concentrated in the field of fracture mechanics. However the fatigue crack initiation and growth in machines and structures usually occur in mixed mode loading. If there is any relationship between the cause of fracture in mixed mode loading and fracture surface, fracture surface pattern will be the main mean explaining reasons of fatigue fracture and obtaining further information about fracture process. In this paper four point shear-fatigue test with Aluminum alloy Al 5083-O is carried out from this prospect and then the mixed mode distribution of fracture surface is examined from the result after identifying the generation of fatigue crack surface pattern. It was found from the experimental results that the fatigue crack surface pattern and the fatigue crack shear direction are remarkably consistent. Furthermore It is possible that the analysis of distribution of mixed mode through the fatigue crack surface pattern.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.1
• /
• pp.1-6
• /
• 1984

Calculation of the launch-condition dependent near field pattern, modal power distribution and far field pattern of the SGS mode scrambler by ray optical approch fits well with the experiment. These results were applied to explain how to establish the stable mode launching into the grated index multimode fiber under test by the SGS mode scrambler. The effective use of the 5G5 mode scrambler is found to restrict the launching NA as well as possible. This was also confirmed by experiment.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.107-115
• /
• 2011

Purpose: To design and fabricate the distributed auto edging machine for the development. Methods: We got the necessary data needed in design by using CAD. Based on the these data, we fabricated the trial product for the development of the distributed auto edging machine. Results: The patternless mode could be operated by receiving the eyesize data from the auto lay-outer with the RS232C transmission system and the pattern mode could be operated by setting the pattern on the left side of the machine. The distributed auto edging machine were composed with combinations of many elements; head, auto arm, pattern clamp and grinding wheels. The head part controlled the grinding of ophthalmic lens by operating the vertical and horizontal motors. The wheels part was comprised of glass mode, plastic mode, V-bevel mode and polish mode. The slide in the auto arm was equipped on the below of the patten and the slide could hold up the pattern which was rotated by fixed shaft. The pattern clamp could move the head part to the up and down or right or left way by the manual operation of optometrists. Conclusions: We could succeed in making the trial product by applying it to the development of the distributed auto edging machine which could be used as the patternless mode and pattern mode, selectively. Therefore, it was confidently expected that this product was very helpful for the optometrists to dispense the ophthalmic lens because of its cost-efficiency and convenience.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.109-115
• /
• 2016

In this paper, In this paper, we use two methods to compare the slim speakers. That way, the diaphragm scan using laser and diaphragm photographed using a thermal imaging camera. Slim speaker has the structure of a flat plate type. Break-up mode by this characteristic is displayed in a larger size. Further, since the installation space is narrow, it has limited moving coil cooling. As a result, the break-up mode slim speakers, a significant impact on quality. In this study, try to connect the break-up mode of the diaphragm, the heat transfer mode of the diaphragm. Experiment for comparison, a two-step. The first step is to measure the divided vibration through the vibration plate scan. The second step measures the diaphragm photographed using a thermal imaging camera. Then, compare the results of both of the same frequency. Thus, comparing the heat transfer pattern and the pattern of break-up mode. Tend to be analysis of break-up mode from the pattern comparison, and document for the optimum design.

• Computers and Concrete
• /
• v.28 no.5
• /
• pp.507-519
• /
• 2021

In this study, a new procedure was proposed in order to predict the crack pattern and failure mode of steel fiber reinforced concrete (SFRC) corbels. Moreover, an experimental study was carried out in order to investigate the effect of several parameters, such as compressive strength, tensile strength, steel fiber ratio, shear span on the mechanical behavior of SFRC corbels in detail. Totally, 24 RC and SFRC corbels were prepared for the experimental study. Experimental results indicate that each investigated parameter has noticeable effect on the load capacity and failure mode of SFRC corbels. Moreover, finite element (FE) model of the tested corbels were prepared and efficiency of FE model was investigated for further studies. Comparison of FE and experimental results show that there is an acceptable fit between them regarding load capacity and crack patterns. Thereafter, parametric study was carried out via FE analyses in order to obtain a methodology for crack pattern and failure mode prediction of SFRC corbels. As a result of parametric studies, a new procedure was proposed as flowcharts in order to predict the failure mode of SFRC corbels for normal and high strength concrete class separately.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.45-46
• /
• 2008

The conventional biased vertical alignment (BVA) mode has several advantages such as rubbing- and protrusion-free, wide-viewing angle and stable LC dynamics against external pressure. However manufacturing process of BVA mode is difficult task because the pixel and bias electrode signal are different in each frame. To solve this problem, we investigated the pattern free vertical alignment (PFVA) by using the UV-curable reactive mesogen (RM), in which the LC molecules were made to be pre-tilted. Eventually transmittance and response time in PFVA mode were found to be improved as compared to BVA mode.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.885-895
• /
• 2016

The lowest power mode (passive-standby mode) was proposed for reducing the power consumption of set-top boxes in a standby state when not receiving content. However, low-power set-top boxes equipped with the lowest power mode have been rarely commercialized because of their low-quality user experience. In the lowest power mode, they deactivates almost all of operational modules and processes, and thus require dozens of seconds for activation latency (that is, the latency for activating all modules of the set-top boxes in a standby state). They are not even updated in a standby state because they deactivate their network interfaces in a standby state. This paper proposes an adaptive standby mode scheduling method for improving the user experience of such boxes. Set-top boxes using the proposed method can analyze the activation pattern and find the frequently used time period (that is, when the set-top boxes are frequently activated). They prepare for their activation during this frequently used time period, thereby reducing the activation latency and enabling their update in a standby state.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.419-422
• /
• 2007

This paper, designed UWB elliptical slot antenna and analysis based on the distribution of the electromagnetic fields pattern and resonant mode of designed antenna is presented. Designed antenna is fabricated on FR4 substrate with thickness of 1.524mm and relative dielectric constant 4.4. The measured bandwidth of $3.6GHz{\sim}20GHz$ for VSWR<2. Through the field pattern and resonant mode analysis that the slot antenna operates on a series of the multi-pole radiation based on TE modes matched to system impedance. And the perfect magnetic wall is along the axis of symmetry on the y-z plane. This result gives us an easier method to design the similar antennas, which is the impedance matching to the system impedance after once constructing a proper structure with a series of multi-mode resonances.