• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1503-1512
• /
• 1992

The strength evaluation and life prediction on the corrosion part of structure is one of the most important subjects, as a viewpoint of reducing economic loss by regular inspection, maintenance, repair and replace. For this purpose, it has been difficult to obtain the available data on growth of pit depth or growth rate of each pit which depends on time. In this paper, the life prediction and strength evaluation method was suggested for the structure with irregular stress concentration part by surface corrosion. The statistical distribution pattern of corrosion depth and the degree of fatigue strength decline were confirmed according to corrosion period by artificial corrosion of SS41 steel. The life prediction and the fatigue strength evaluation of materials with consideration of the corrosion period on the extreme value statistic analysis by the data of maximum depth of corrosion and on random variable was studied.

• Journal of Korean Medical classics
• /
• v.28 no.1
• /
• pp.21-34
• /
• 2015

Objectives : The treatment starts with physical examination. The four examinations(四診) is a method to examine the disease. The books on history of diagnostics about it contained substantial contents about inspection(望診) and palpation including pulse taking(切診), while they contained little contents about auscultation(聞診) and interrogation or questioning(問診) relatively. For this reason, this study was conducted as on interrogation first of all. Methods : I looked into the contents related to interrogation that were scattered in plenty of books. There were chapters of specialty in interrogation since the Ming dynasty, so I looked into these chapters in chronological order. Results & Conclusions : The level of the contents of interrogation prior to the Ming dynasty were rudimentary and recapitulative. However, there was a turning point by three kinds of books appeared in the Ming dynasty. Yixuerumen Wenzheng dealt with detailed contents. Yixuezhunshengliuyao Wenbingbixiang extended the range of contents. Jingyuequanshu Shiwenpian systematized Eight Principle Pattern Identification(八綱辨證) with increase of contents. Since then, books of the Qing Dynasty were mostly based on three kinds of books ahead. Among these, Yimenfalu Yimingwenbingzhifa(醫門法律 一明問病之法) and Xingsewaizhenjianma wenfa(形色外診簡摩 問法) mentioned the importance of a succinct interrogation that hit the mark and Yibian Yiwenzheng dealt with another detailed contents unlike the previous books based on substantial contents.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.92-102
• /
• 2003

To detect electrical faults of a TFT (Thin Film Transistor) panel for the LCD (Liquid Crystal Display), techniques of converting electric field to an image are used One of them is the PDLC (polymer-dispersed liquid crystal) modulator which changes light transmittance under electric field. The advantage of PDLC modulator in the electric field detection is that it can be used without physically contacting the TFT panel surface. Specific pattern signals are applied to the data and gate electrodes of the panel to charge the pixel electrodes and the image sensor detects the change of transmittance of PDLC positioned in proximity distance above the pixel electrodes. The image represents the status of electric field reflected on the PDLC so that the characteristic of the PDLC itself plays an important role to accurately quantify the defects of TFT panel. In this paper, the image of the PDLC modulator caused by the change of electric field of the pixel electrodes on the TFT panel is acquired and how the characteristics of PDLC reflect the change of electric field to the image is analyzed. When the holding time of PDLC is short, better contrast of electric field image can be obtained by changing the instance of applying the driving voltage to the PDLC.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1051-1057
• /
• 1998

The discrimination of the agricultural origin, especially locally produced or imported from the products such as Ganoderma lucidum, sesame and arrowroot were investigated by using the electronic nose. Volatile components from these products were discriminated by twelve of conducting polymer sensors without any pretreatment. Pattern recognition was carried out. Multiple discriminant analysis showed the difference between imported agricultural product and locally produced ones such as Ganoderma lucidum, sesame and arrowroot. Unknown habitat of sesame and arrowroot could be identified by multiple discriminant analysis whether the imported or the locally produced one.

• Archives of Reconstructive Microsurgery
• /
• v.13 no.1
• /
• pp.29-35
• /
• 2004

Materials and Methods: Total number of peroneal perforator flap is 14 cases, which 10 cases were man, 4 cases were woman. The range of age was 12 years old minimally and until 63 years old. The trauma was most common etiology, which was like traffic accidents, 9 cases. We confirmed tibialis anterior artery patency by doppler flow meter, angiography as preoperative evaluation. Results: 1. The success rate was 91%, that in 14 cases, 13 cases were succeded. 2. To obtain successful result of peroneal flap, one must have the anatomic concept for vascular pattern, 8 cases were between peroneus muscle and soleus muscle branch type but, 3 cases were through soleus muscle branch type, so we treated these cases by using soleus muscle including peroneal perforating branch not to injury perforating artery directly. 3. The pedicle size was between minimally $2{\times}2.5cm$ and maximally $6.5{\times}8.5cm$ so we could treat large recipient site. 4. The pedicle length was between minimally 3.2 cm and maximally 11.5cm, average 7.5 cm. 5. The diameter of perforating artery was estimated by inspection, that was about 0.2-0.5 cm Conclusion: The peroneal perforating artery flap has merits that we can approach in avascular zone and has wide movable range from foot to distal femur and little donor site mobidity and can harvest osteocutaneous flap. The weak point was the irregular anatomy of nutrient artery and not to contain sensory nerve.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.25-32
• /
• 2010

The paper proposes a hierarchical fault detection method for the high voltage equipment using a microphone array which detects the location of fault and the thermal imaging and CCD cameras which verifies the fault and stores the image, respectively. There are partial arc discharges on the faulty insulators, which generates a specific pattern of sound. Detecting the signal using the microphone array, the location of the faulty insulator can be estimated. The 6th band-pass filter was applied to remove noise signal from wind or external influence. When the mobile robot carries the thermal and CCD cameras to the possible place of the fault insulator, the fault insulators or power transmission wires can be detected by the thermal images, which are caused by the aging or natural erosion. Finally, the CCD camera captures the image of the fault insulator for the record. The detection scheme of fault location using the microphone array and the thermal images have been proved to be effective through the real experiments. As a result of this research, it becomes possible to use a mobile robot with the integrated sensors to detect the fault insulators instead of a human being.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.695-702
• /
• 2010

This paper presents an image alignment algorithm for application of AOI (Automatic Optical Inspection) based on SIFT. Since the correspondences result using SIFT descriptor have many wrong points for aligning, this paper modified and classified those points by five measures called the CCFMR (Cascade Classifier for False Matching Reduction) After reduced the false matching, rotation and translation are estimated by point selection method. Experimental results show that the proposed method has fewer fail matching in comparison to commercial software MIL 8.0, and specially, less than twice with the well-controlled environment’s data sets (such as AOI system). The rotation and translation accuracy is robust than MIL in the noise data sets, but the errors are higher than in a rotation variation data sets although that also meaningful result in the practical system. In addition to, the computational time consumed by the proposed method is four times shorter than that by MIL which increases linearly according to noise.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.785-786
• /
• 2017

Recently, interest in AMOLED (Active Matrix OLED) panels has been growing with the development of displays used in each device. Therefore, the demand for the inspection equipment required for production is spreading, and therefore, efficient design is required to operate a plurality of signal generators. In this paper, we propose a central server management system for signal generators. The proposed system includes a method for driving an AMOLED panel, and the timing and power setting results are presented. Thus, it is possible to cope with loss or alteration of data, and it is believed that stable and smooth communication is possible.

• Journal of Sasang Constitutional Medicine
• /
• v.17 no.1
• /
• pp.45-55
• /
• 2005

1. Objectives In this study, we analysed the up-to-the-present data in the SCIB and the chart of Iksan Wonkwang Oriental Medical Clinic, to develop the system and factors of data for the SCIB(Sasang constitution Information Bank). 2. Methods SCIB data is composed of analyses about the QSCC II(Questionnaire for the Sasang Constitution Classification II), Cold-hot questionaire, Ban-chi constitution questionnaire, Body composition, Body measurement, 24-hour food intake & Activity examination, MBTI & MMTIC, Informed consent & Blood sampling, and data presented by committee of Sasang constitution diagnosis expert. And the chart data of Iksan Wonkwang Oriental Medical Clinic is composed of analyses about Inspection, Ausculfation and olfaction, Inquiry, Pulse feeling and palpitation, and treatment field. 3. Results and Conclusions Almost data in the SCIB are lack of regular forms because they are based on mainly the QSCC II and additionally other examinations. Conclusionly important matters of the SCIB data are as follows: (1) the standard form including 4 whole diagnostic factors (2) the standard form including symptoms, pattern identifications, treatment processes and treatment results (3) objectivity and practicality to collect data.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.33-42
• /
• 2003

In this paper, we propose an enhancement of the ultrasonic image for non-destructive inspection of aircraft composite materials. The ultrasonic images are corrupted by a speckle noise which has the characteristic of granular pattern noise and is in all types of coherent imaging systems, the signal independent and multiplicative noise. In this paper, we derive a filter, called the AWLF(Adaptive Window Log Filter), from the nature of the speckle. The filter is made of the MEAN Filter in the edge region and Log Filter in the flat or noise region. To make a distinction between edge and flat region, we calculate the inclination around the local window instead of computing the local statistics of pixels such as local mean ${\bar{M}}$ and standard deviation ${\sigma}_s$. According to the obtained region, edge region is performed by the mean filter and flat region by the Log filter. Performance of the proposed filter is evaluated by the Enhanced Factor$(F_e)$ and the Speckle Index(SI).