• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.476-483
• /
• 2017

The decay heat that is produced by nuclear reactor spent fuel must be cooled in a spent fuel storage pool. A wickless heat pipe or a vertical two-phase closed thermosyphon (TPCT) is used to remove this decay heat. The objective of this research is to investigate the thermal performance of a prototype model for a large-scale vertical TPCT as a passive cooling system for a nuclear research reactor spent fuel storage pool. An experimental investigation and numerical simulation using RELAP5/MOD 3.2 were used to investigate the TPCT thermal performance. The effects of the initial pressure, filling ratio, and heat load were analyzed. Demineralized water was used as the TPCT working fluid. The cooled water was circulated in the water jacket as a cooling system. The experimental results show that the best thermal performance was obtained at a thermal resistance of $0.22^{\circ}C/W$, the lowest initial pressure, a filling ratio of 60%, and a high evaporator heat load. The simulation model that was experimentally validated showed a pattern and trend line similar to those of the experiment and can be used to predict the heat transfer phenomena of TPCT with varying inputs.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2024

The purpose of this study is to compare and analyze the impact range of explosion damage due to gas leaks at LPG filling stations, focusing on propane and butane, which are components of vehicle LPG. The scenarios were designed based on the explosion incident at an LPG filling station in Gangwon-do, where an actual gas leak accident occurred, resulting in Scenario I and Scenario II. The ALOHA program, developed by the U.S. National Oceanic and Atmospheric Administration (NOAA), was used as the tool to analyze the impact range of the explosion damage for both substances. The results of the study indicated that, under identical conditions, propane had a wider impact range of damage than butane. This is presumed to be due to the greater explosion energy of propane, attributable to its physicochemical properties. Therefore, when preparing for LPG leak accidents, measures for propane need to be prioritized. As safety measures for propane, two suggestions were made to minimize human casualties. First, from a preventive perspective, it is suggested to educate workers about propane. Second, from the perspective of response measures and damage minimization, it is suggested to thoroughly prepare emergency evacuation and rescue plans, evacuation routes, designated shelters, and emergency response teams. This study compares and analyzes the impact range of radiative heat damage based on LPG components. However, hazardous accidents are critically influenced by the type of leaking substance, the form of the leak, and meteorological factors affecting the diffusion pattern of the substance. Therefore, for future research, it is proposed to model various leakage scenarios for the same substance to conduct a comprehensive risk assessment.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.4
• /
• pp.293-301
• /
• 2010

The Ipbong Andesite is a stratigraphic unit which is lain in the lowermost part of the Yucheon Group in the southeastern Yeongyang sbbasin. The Ipbong Andesite is lain on the Sinyangdong Formation and under the dacitic tuff, and consists in its lower andesitic tuffs and upper lavas. The andesitic lavas show some alignments of elongate vesicles filling with calcite amygdules and plagioclase microphenocrysts, and show rare imbrication of the microphenocrysts in vertical sections parallel to them. The flow directions which is measured from the flow indicators are laid along NNW-SSE trend in the eastern part and NNESSW in the southwestern part of the study area. Movement pattern from the flow lineations suggests that the Ipbong Andesite had a fanlike pattern by flowing southwards from the mid-northern part. Accordingly a small diorite stock in the mid-northern part area may probably be a source area of the Ipbong Andesite.

• Journal of the Korean Society of Costume
• /
• v.60 no.5
• /
• pp.71-87
• /
• 2010

The purpose of the study is analyzing Japanese modern costume, through examining legislation process and the relics of Chickimkwan's and Juimkwan's court costume. The results of the study are as follows. First, the proposer of civil court costume, established in 1872, was Iwakura Mission dispatched to America and Europe. The Mission realized the importance of preparing western-style costume in civilization from experience wearing traditional clothing at ceremony of presenting credentials in America. Afterwards, the Mission proposed that the government accept western-style as civil court costume and became first wearers in Japanese in England. Second, the difference, between ordinance and actual clothes worn by Iwakura Mission, occurred in process of legislation in 1872. That might be considered as trial and error in introducing different culture. The coexistence of England and French styles was unified into French style by the revision of civil court costume in 1886. Third, the pattern of paulownia embroidered on civil court costume was utilized as symbol of Japan. While the costume of Chickimkwan was embroidered by the pattern of 7 and 5 leaves paulownia, that of Juimkwan was 5 and 3 leaves expressing their grades. Fourth, relics research showed how formed manufacturer information and enacted design were in embroidery. The relics seemed to be manufactured in Japan, because emblem of Mitsukosi tailor was embroidered on inner part of the back of collar of Chickimkwan in Nara Women's University, Japan and that of Yamasaki on left inner pocket of Juimkwan in the Independence Hall, Korea. The embroider techniques comprised forming by filler particles according to the design, filling up coiled gold threads and expressing stem with gold threads and spangles. As preemptive study, establishment process of Japanese civil court costume in this study will help understand form characteristics appeared in civil court costume act of Korean Empire.

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.191-198
• /
• 2022

Background: The purpose of this study was to evaluate the composition of the crystal phases of various calcium silicate-based materials (CSMs): ProRoot white MTA^Ⓡ (mineral trioxide aggregate) (WMTA), Ortho MTA^Ⓡ (OM), Endocem MTA^Ⓡ (EM), Retro MTA^Ⓡ (RM), Endocem Zr^Ⓡ (EN-Z), Biodentine^TM (BD), EZ-seal^TM (EZ), and OrthoMTA III (OM3). Methods: In a sample holder, 5 g of the powder sample was placed and the top surface of the material was packed flat using a sterilized glass slide. The prepared slides were mounted on an X-ray diffraction (XRD) instrument (D8 Advance; Bruker AXS GmbH, Germany). The X-ray beam 2θ angle range was set at 10~90° and scanned at 1.2° per minute. The Cu X-ray source set to operate at 40 kV and 40 mA in the continuous mode. The peaks in the diffraction pattern of each sample were analyzed using the software Diffrac (version 2.1). Then, the peaks were compared and matched with those of standard materials in the corresponding Powder Diffraction File (PDF-2, JCPDS International Center for Diffraction Data). A powder samples of the materials were analyzed using XRD and the peaks in diffraction pattern were compared to the Powder Diffraction File data. Results: Eight CSMs showed a similar diffraction pattern because their main component was calcium silicate. Eight CSMs showed similar diffraction peaks because calcium silicate was their main component. Two components were observed to have been added as radiopacifiers: bismuth oxide was detected in WMTA, OM, and EM while zirconium oxide was detected in RM, EN-Z, BD, EZ, and OM3. Unusual patterns were detected for the new material, OM3, which had strong peaks at low angles. Conclusion: It was caused by the presence of Brushite, which is believed to have resulted in crystal growth in a particular direction for a specific purpose.

• Analyses & Alternatives
• /
• v.2 no.2
• /
• pp.93-110
• /
• 2018

Due to its speciality, Johannesburg has drawn wide attention from the international academia, which the existing urban theory cannot easily explain. This paper focuses on the spatial pattern of Johannesburg, and finds that it is highly fragmented: first North-South Division due to apartheid and gold mining, secondly, the continuous sprawl due to population densification, and thirdly formation of city-region due to the fill-in spatial policy. The fragmented spatial pattern undermines the social integration and weakens the potential economic sustainability, which make the balanced multi-core spatial pattern inevitable under the influence of the international planning thought. The Johannesburg's spatial transformation comes not only from social integration, but also from the development vison of world-class status of an African city. In reality, since the collapse of apartheid, the municipal government has released series of strategic planning in different executive phase. These different plannings unanimously focus on the world class status although since 2008, the social inclusiveness is more emphasized. Thus, Johannesburg implements some spatial policies, as promoting the corridor of freedom, identifying the key nodes in the city then developing with high density, implementing the in-filling policy, managing the urban growth boundary, effectively preserving the natural system. However, the industrial structure in Johannesburg is already quite high-ended which cannot produce many jobs and also require much investment in advanced infrastructure. Thus, the strategic goals of world-class status of an African city and social inclusiveness which really need widely shared public services to some extent are in tension. After evaluation, we can see that spatial transformation is quite limited. Obviously spatial transformation largely depends on the social-economy. The population is still in flow. In this sense Johannesburg must energetically support the employment-based industry, effectively control the spatial sprawl and carry out institutional innovation which further incentive investment, gradually build an integrated regional governance. In general, how Johannesburg combines globalization and its own condition is still worth thinking in both theory and practice.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• Ocean and Polar Research
• /
• v.39 no.2
• /
• pp.85-106
• /
• 2017

The Lago Sofia conglomerate in southern Chile is a deep-marine gravelly deposit, which is hundreds of meters thick and kilometers wide and extends laterally for more than 100 km, filling the foredeep trough of the Cretaceous Magallanes Basin. For understanding the depositional processes and environments of this gigantic deep-sea conglomerate, detailed analyses on sedimentary facies, architecture and paleoflow patterns were carried out, highlighting the differences between the northern (Lago Pehoe and Lago Goic areas) and southern (Lago Sofia area) parts of the study area. The conglomerate bodies in the northern part occur as relatively thin (< 100 m thick), multiple units intervened by thick mudstone-dominated sequences. They show paleoflows toward ENE and S to SW, displaying a converging drainage pattern. In the southern part, the conglomerate bodies are vertically interconnected and form a thick (> 400 m thick) conglomerate sequence with rare intervening fine-grained deposits. Paleoflows are toward SW. The north-to-south variations are also distinct in sedimentary facies. The conglomerate bodies in the southern part are mainly composed of clast-supported conglomerate with sandy matrix, which is interpreted to be deposited from highly concentrated bedload layers under turbidity currents. Those in the northern part are dominated by matrix- to clast-supported conglomerate with muddy matrix, which is interpreted as the products of composite mass flows comprising a turbidity current, a gravelly hyperconcentrated flow and a mud-rich debris flow. All these characteristics suggest that the Lago Sofia conglomerate was formed in centripetally converging submarine channels, not in centrifugally diverging channels of submarine fans. The tributaries in the north were dominated by mass flows, probably affected by channel-bank failures or basin-marginal slope instability processes. In contrast, the trunk channel in the south was mostly filled by tractive processes, which resulted in the vertical and lateral accretion of gravel bars, deposition of gravel dunes and filling of scours and channels, similar to deposits of terrestrial gravel-bed rivers. The trunk channel developed along the axis of foredeep trough and its confinement within the trough is probably responsible for the thick, interconnected channel fills. The large-scale architecture of the trunk-channel fills shows an eastward offset stacking pattern, suggesting that the channel migrated eastwards most likely due to the uplift of the Andean Cordillera.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.165-173
• /
• 2012

In this work, scientific and systematic analysis was conducted for finding out the methods and techniques of ancient ink stick making. Analysis the ancient ink stick on ancient documents and wooden writing as letter or painting, we concluded as followings. From the analysis of ancient wood by dendrochronology, wood was cut at 1899, which provided the information on the year of ink stick's made on writing on ancient wood. Single particle size for soot of ancient ink stick was 107 nm for ink on the roof-filling timber in Sinsunwonjeon of Changdeok Palace, compared to 38 to 86 nm on the letter on ancient 12 paper document. Aggregate particle size was 370 nm for ink on the roof-filling timber in Sinsunwonjeon of Changdeok Palace, but 206 to 318 nm for aggregate particle size on 12 paper documents. There was similar pattern between single particle size and aggregate particle size of soot, which might provide the information of raw material for ancient ink. From infra-red and Raman spectroscopic analysis of sheet of writing on paper or wood, there was severe interference from background material (paper or wood). From Raman spectroscopic analysis of ancient ink carefully separated from ancient wood, spectrum pattern was closer to ink stick made by the soot from pine burning.

• Restorative Dentistry and Endodontics
• /
• v.17 no.2
• /
• pp.307-330
• /
• 1992

The aim of this study was to investigate the physical properties of visible light curing Glass Ionomer cement for restorative esthetic filling. The control group was the autopolymerizing GC Fuji II Glass Ionomer cement (2.2: 1 P/L ratio) and the experimental groups were made by following procedure. To induce the polymerization by visible light, the powder of GC Fuji II GI cement and the liquid of Vitrabond for base & liner were mixed in an amalgam capsule with 2.5:1, 3.0:1, 3.5:1 P/L ratio (% wt/wt). After fabrication of specimens, compressive strength, fracture toughness ($K_{IC}$) Scanning Electron Microscope and X-ray Diffraction, water-leachable content, marginal leakage and surface roughness were studied. The results were as follows: 1. Only experimental No. 1 group (visible light curing) showed less compressive strength than control group 1 hour after curing. Strength was increased with aging in all groups, so the compressive strength of light curing groups was no less than that of autopolymerizing group after 3 weeks. 2. Experimental No.3 group (visible light curing) was inferior to No.2 group (visible light curing) in fracture resistance but light curing groups were more resistant to fracture than autopolymerizing group and showed ductile fracture pattern as compared with the brittle fracture pattern of autopolymerizing group. 3. From scanning electron microscopic image, various sized unreacted powder particles, surrounded by silica gel, were embedded in polysalt matrix. Light curing groups showed little crack and more dense unreacted particles than autopolymerizing group. 4. From X-ray diffraction analysis, GC Fuji II Glass Ionomer cement powder and all groups showed glassy appearance but light curing groups seemed to be more intensive in crystaline than autopolymerizing group. S. The most significant dissolution was shown in early setting period in all group. Light curing groups were dissolved less than autopolymerizing group. 6. Marginal leakage was not different significantly in case of cavity margin composed of same tooth structure (ex. only enamel margin, only dentin margin) but much more leakage was shown in dentin/cementum margin than enamel margin. In only case of only enamel margin, light curing groups were superior to autopolymerizing group. 7. All groups showed relatively smooth surface, which irregularity was less than $1{\mu}m$. Light curing groups were smoother than autopolymerizing group.