• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.992-996
• /
• 2008

In this study, changes in precipitation across South Korea during snow seasons (November-April) and their potential are examined. Current (1973/74-2006/07) and future (2081-2100) time series of snow indices including snow season, snow-to-precipitation ratio, and snow impossible day are extracted from observed snow and precipitation data for 61 weather stations as well as observed and modeled daily temperature data. Analyses of linear trends reveal that snow seasons have shortened by 3-13 days/decade; that the snow-to-precipitation ratio (the percentage of snow days relative to precipitation days) has decreased by 4-8 %/decade. These changes are associated with pronounced formations of a positive pressure anomaly core over East Asia during the positive Arctic Oscillation winter years since the late 1980s. A snow-temperature statistical model demonstrates that the warming due to the positive core winter intensifies changes from snow to rain at the rate of $4.7cm/^{\circ}C$. The high pressure anomaly pattern has also contributed to decreases of air-sea thermal gradient which are associated with the reduction of snow could formation. Modeled data predict that a fingerprint of wintertime global warming causing changes from snow to rain will continue to be observed over the 21st century.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.49-55
• /
• 2006

Compressional wave velocity (Vp), shear wave velocity (Vs), elastic and physical properties, and electrical resistivity for two core sediments obtained from Southeastern Yellow Sea Mud (SEYSM) were measured and computed. The sediments consist of homogeneous mud (mostly silt and clay) with shells and shell fragments. As a result, the mean grain size is uniform ($7.5-8.5{\Phi}$ throughout the core sediments. However, physical properties such as wet bulk density and porosity show slightly increasing and decreasing patterns with depth, compared to the mean grain size. The compressional (about 1475 m/s in average) and shear wave (about 60 m/s in average) velocities with depth accurately reflect the pattern of wet bulk density and porosity. Electrical resistivity is more closely correlated with compressional wave velocity than physical properties. The computed Vp/Vs and Poisson's ratios are relatively higher (more than 10) and lower (approximately 0.002) than Hamilton's (1979) data, respectively, suggesting the typical characteristics of soft and fully water-saturated marine sediments. Thus, the Vp/Vs ratio in soft and unconsolidated sediments is not likely sufficient to examine lithology and sediment properties. Relationships between the elastic constant and physical properties are correlated well. The elastic constants (Poisson's ratio, bulk modulus, shear modulus) given in this paper can be used to characterize soft marine sediments saturated with seawater.

• Structural Engineering and Mechanics
• /
• 제60권1호
• /
• pp.1-19
• /
• 2016

In this study, the supersonic panel flutter of doubly curved composite sandwich panels with variable thickness is considered under aerothermoelastic loading. Considering different radii of curvatures of the face sheets in this paper, the thickness of the core is a function of plane coordinates (x,y), which is unique. For the first time in the current model, the continuity conditions of the transverse shear stress, transverse normal stress and transverse normal stress gradient at the layer interfaces, as well as the conditions of zero transverse shear stresses on the upper and lower surfaces of the sandwich panel are satisfied. The formulation is based on an enhanced higher order sandwich panel theory and the vertical displacement component of the face sheets is assumed as a quadratic one, while a cubic pattern is used for the in-plane displacement components of the face sheets and the all displacement components of the core. The formulation is based on the von $K{\acute{a}}rm{\acute{a}}n$ nonlinear approximation, the one-dimensional Fourier equation of the heat conduction along the thickness direction, and the first-order piston theory. The equations of motion and boundary conditions are derived using the Hamilton principle and the results are validated by the latest results published in the literature.

• 환경영향평가
• /
• 제11권3호
• /
• pp.117-127
• /
• 2002

This study tested the usefulness of landscape indices for quantifying forest fragmentation due to linear development projects. Research was carried out in the middle-upper Nakdong River watershed, which has been affected by the expressway building, or national road-widening. Landscape indices were calculated from the forest cover maps before and after road-building using FRAGSTATS 3.1. We could successfully demonstrate the forest fragmentation based on landscape indices; (1) patch size decreased, and edge density and patch density increased (2) roads simplified patch shapes, especially in the larger patches, (3) patch core area size decreased, and core area density increased, (4) the distance increased between the focal patch and each of the other patches within the search radius (=1km) as a result of roads. We suggest several important needs for future researches, including continued investigation of scaling issues, development of indices that measure specific components of spatial pattern, and study of the relationships between forest fragmentation and ecological processes.

• 농약과학회지
• /
• 제8권4호
• /
• pp.319-324
• /
• 2004

실리카 중공 미세구를 이용하여 방출 조절형 입제 농약을 제조합에 있어 실리카 중공 미세구 제조시 핵 제거 방법으로 열분해법을 사용하면 benfuracarb를 실리카 중공 미세구 중량의 2.67배까지 함침이 가능하였다. 이렇게 제조된 방출 조절형 입제 농약을 수중 방출 실험한 결과, 점결제로 ESO를 사용하였을 때 일정한 benfuracarb 방출 속도를 유지하여 10일부터 용액 중의 benfuracarb의 농도를 1.65 ppm 정도를 30일까지 유지되었다.

• 천문학회보
• /
• 제38권1호
• /
• pp.64.1-64.1
• /
• 2013

The point spread function (PSF) of an optical system is in general defined as a two-dimensional intensity distribution which results from a single point source at infinity. It is an important key for the evaluation of the optical performance of an astronomical telescope. The PSFs of the soft X-ray telescope (SXT) aboard Yohkoh were measured in a wide range of the field-of-view under the in-flight configuration at White Sands Missile Range prior to launching the satellite. It has been known that the SXT PSF has a sharp peak at the core and the intensity drops very fast as it goes distant from the center. Due to the combination of this sharp peak at the PSF core and the effect of undersampling by a large pixel size, a carefully designed method is requested in the examination of the PSF data. The pattern of the SXT PSF is determined by the fitting of a mathematical functional form to the pre-launch experimental data. The elliptical Moffat function has been adopted for the evaluation of the SXT PSF. It is revealed from our study that the SXT PSF shows a peculiar characteristics, and thus a careful consideration on the undersampling effect and also a proper choice of statistics are necessary for the determination of the best fit function of the PSF. Details on the on- and off-axis SXT PSF in the field-of-view will be introduced and discussed in our presentation.

• 한국지능시스템학회논문지
• /
• 제11권8호
• /
• pp.764-770
• /
• 2001

본 논문에서는 대용량의 퍼지 데이터를 고속으로 전송 및 추론하기 위해 새로운 PCI 버스 기반 병렬 퍼지 시스템을 제안한다. 많은 퍼지 데이터의 고속전송을 위해 PCI 9050 인터페이스를 사용하고, 병렬 퍼지 추론 시스템을 위한 병렬 퍼지 모듈들을 FPGA로 설계하여 PCI 타겟 코어로서 병렬로 동작하게 한다. 여기서 소속함수들의 각 요소와 전건부 또는 후건부부분의 병렬화을 고려하여 제안된 시스템을 VHDL을 사용하여 설계 및 구현하였다. 제안된 시스템은 실시간에 고속의 퍼지추론을 요하는 시스템 또는 대용량 인공위성 영상 데이터의 패턴 인식 등과 같이 다수의 전건부, 후건부의 변수를 갖는 시스템에 활용될 수 있다.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.577-588
• /
• 1995

A numerical study is made on the melting process of an unconstrained ice inside an isothermal ice-ball capsule. The unmelted ice core is continuously ascending on account of buoyancy forces. Such a buoyancy-assisted melting is commonly characterized by the existence of a thin liquid film above the ice core. The present study is motivated to present a full-equation-based analysis of the influences of the initial subcooling and the natural convection on the fluid flow associated with the buoyancy-assisted melting. In the light of the solution strategy, the present study is substantially distinguished from the existing works in that the complete set of governing equations in both the melted and unmelted regions are resolved in one domain. Numerical results are obtained by varying the wall temperature and initial temperature. The present results reported the transition of the flow pattern in a spherical capsule, as the wall temperature was increased over the density inversion point. In addition, time wise variation of the shapes for the liquid film and the lower ice surface, the time rate of change in the melt volume fraction and the melting distance at symmetric line is analyzed and is presented.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 춘계학술발표대회
• /
• pp.87-89
• /
• 2014

Aho-Corasick (AC) 알고리즘은 실시간 성능을 요하는 많은 응용 분야에 적용되는 스트링 매칭 알고리즘으로서, 한번에 여러 개의 패턴들을 동시에 매칭시키는 것이 가능하다. 본 논문에서는 Intel 의 Many Integrated Core (MICO 아키텍쳐인 Xeon Phi 칩 상에서 AC 알고리즘을 병렬화한다. 이를 위하여 AC 알고리즘에서 입력 데이터에 대하여 여러 개의 패턴들을 동시에 매칭시키는 데에 사용되는 Deterministic Finite Automaton 구조를 압축시키는 새로운 기법을 제안한다. 이 기법은 캐시 미스를 감소시켜서 XeonPhi 상에서 AC 알고리즘의 성능을 크게 향상시킨다.

• Computers and Concrete
• /
• 제16권2호
• /
• pp.245-260
• /
• 2015

In this study, nominal moment-axial load interaction diagrams, moment-curvature relationships, and ductility of rectangular hybrid beam-column concrete sections are analyzed using the modified Hognestad concrete model. The hybrid columns are primarily reinforced with steel bars with additional Glass Fiber Reinforced Polymer (GFRP) control bars. Parameters investigated include amount, pattern, location, and material properties of concrete, steel, and GFRP. The study was implemented using a user defined comprehensive $MATLAB^{(R)}$ simulation model to find an efficient hybrid section design maximizing strength and ductility. Generating lower bond stresses than steel bars at the concrete interface, auxiliary GFRP bars minimize damage in the concrete core of beam-column sections. Their usage prevents excessive yielding of the core longitudinal bars during frequent moderate cyclic deformations, which leads to significant damage in the foundations of bridges or beam-column spliced sections where repair is difficult and expensive. Analytical results from this study shows that hybrid steel-GFRP composite concrete sections where GFRP is used as auxiliary bars show adequate ductility with a significant increase in strength. Results also compare different design parameters reaching a number of design recommendations for the proposed hybrid section.