• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.105-112
• /
• 1998

In this paper, we propose a ESP(Extended Scan Path) architecture for multi-board testing. The conventional architectures for board testing are single scan path and multi-scan path. In the single scan path architecture, the scan path for test data is just one chain. If the scan path is faulty due to short or open, the test data is not valid. In the multi-scan path architecture, there are additional signals in multi-board testing. So conventional architectures are not adopted to multi-board testing. In the case of the ESP architecture, even though scan path is either short or open, it doesn't affect remaining other scan paths. As a result of executing parallel BIST and IEEE 1149.1 boundary scan test by using the proposed ESP architecture, we observed that the test time is short compared with the single scan path architecture. By comparing the ESP architecture with single scan path responding to independency of scan path, test time and with multi-scan path responding to signal, synchronization, we showed that the architecture has improved results.

• Computers and Concrete
• /
• v.12 no.3
• /
• pp.261-283
• /
• 2013

This paper aims to contribute to the three-dimensional generalization of numerical prediction of crack propagation through the formulation of finite elements with embedded discontinuities. The analysis of crack propagation in two-dimensional problems yields lines of discontinuity that can be tracked in a relatively simple way through the sequential construction of straight line segments oriented according to the direction of failure within each finite element in the solid. In three-dimensional analysis, the construction of the discontinuity path is more complex because it requires the creation of plane surfaces within each element, which must be continuous between the elements. In the method proposed by Chaves (2003) the crack is determined by solving a problem analogous to the heat conduction problem, established from local failure orientations, based on the stress state of the mechanical problem. To minimize the computational effort, in this paper a new strategy is proposed whereby the analysis for tracking the discontinuity path is restricted to the domain formed by some elements near the crack surface that develops along the loading process. The proposed methodology is validated by performing three-dimensional analyses of basic problems of experimental fractures and comparing their results with those reported in the literature.

• Journal of Environmental Science International
• /
• v.25 no.11
• /
• pp.1521-1530
• /
• 2016

As a result of dividing typhoon that affected Korean Peninsular between 1999 and 2012 into 7 types of path and entering forecast field and analysis field of RDAPS, until 36 hours from the time of forecast, it is reliable to use the forecast field of RDAPS to predict typhoon and for each typhoon path, the difference between the forecast and the analysis shows normal distribution, which is usable for weather forecast until the $36^{th}$ hour. In the $48^{th}$ hour from the time of forecast, the difference of result depending on each typhoon path increased, which was analyzed to be due to errors in the forecast. It was expected that relatively reasonable results should be shown if the $36^{th}$ hour forecast is used to predict the strength and distribution of strong wind. As a result of using Korean RAM and observing the difference of the maximum damage, reliability was secured up to 36 hours and after 48hours, it was expected that the fluctuation of results may become more severe.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.1000-1004
• /
• 2008

As performance of medical air compressor improve, the problem of noise increased. Noise is very important to medical air compressor because most of this installed inside of building. The main goal of this paper is show TPA (Transfer Path Analysis) result for contribution analysis using PAK system. Generally, the conventional TPA method consists of two steps. First, transfer functions between output sound and sources are measured by excitation experiment. Second, transferred sound in each transfer path is generated by multiplying the transfer function and the sound source signal. Then, if the output sound synthesized from all transferred sounds doesn't give good agreement with the measured output sound (i.e., the accuracies of the transfer functions are low), setting a suitable countermeasure guideline becomes difficult. For obtaining highly accurate transfer functions, eliminating correlations among transfer functions and noise included in the measured data are necessary. In the new method with PAK system, the vibration acceleration and sound signals around the sound sources and the output sound were measured simultaneously to obtain the transfer functions when compressor was operating. By applying PAK system, a highly accurate and efficient transfer path analysis method was developed that does not require an excitation experiment.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.40-50
• /
• 2017

This study aimed to establish and validate the path models among faculty-student interaction, self-directed learning, and institutional commitment which impacted on the academic achievement of the university students. To achieve these goals, the survey results from 488 university students in North Gyungsang Province were analyzed. Descriptive analysis, correlation analysis, t-test, and path model analysis were performed to understand the relationship among variables. First, all the variables showed positive correlations except academic achievement and institutional commitment upon the study results. Second with respect to the differences by groups, faculty-student interaction and institutional commitment demonstrated the significant differences by sex while self-directed learning and academic achievement did not. Third on the path analyses, self-directed learning influenced to academic achievement directly, while faculty-student interaction did to it by mediating with self-directed learning and institutional commitment. The results of this study suggest that faculty-student interaction, self-directed learning, and institutional commitment perceived by the university students were significant elements on their academic achievements.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.1
• /
• pp.42-49
• /
• 2009

In this paper, an alternative method was introduced to conduct a transfer path analysis for airborne noise. The method used the transfer function matrix composed of acoustic transfer functions that are referenced by the input voltage of a calibration source. A calibration factor which is converting a virtual voltage to source strength was deduced by vibro-acoustical reciprocity theorem. The calibration factor is then multiplied to the virtual input voltage to estimate the operational source strength. Three loudspeakers were used to noise sources of acrylic half car model. The method was applied to airborne noise transfer path analysis of the half car. The estimated source strength by transfer path analysis was compared the deduced source strength by vibro-acoustical reciprocity to verify the method.

• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.59-81
• /
• 2012

Recently, in the research on online environment such as e-commerce, and internet banking, the conceptual discussion about trust and risk in an effort to explain a user's behavior is briskly underway. Most of the research on trust and risk are setting up causal relationship without clearly establishing the relationship between trust and risk. Accordingly this study conducted a meta-analysis in order to consider the relationship between trust and risk and to take a look at the difference in causal relationship. This study includes a total of 18 research papers which are setting up the causal relationship between trust and risk in online environment among the research papers published in domestic academic journals since 2000. Result of the meta-analysis, showed that the effect size was -0.367 in the path from trust to risk; -0.131 in the path from risk to trust; -0.276 in the bidirectional path between trust and risk. In addition, this study was able to confirm through literature review that there appeared a high effect of path in case where trust and risk were measured by an uni-dimensional concept than by a multi-dimensional concept.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.6
• /
• pp.9-15
• /
• 2023

In order to properly evaluate the spatio-temporal variations of groundwater flow, the data obtained in field experiments should be corroborated into numerical simulations. Particle tracking method is a simple simulation tool often employed in groundwater simulation to predict groundwater flow paths or solute transport paths. Particle tracking simulations visually show overall the particle flow path along the entire aquifer, but no previous simulation studies has yet described the parameter values at grid nodes around the particle path. Therefore, in this study, a new technical approach was proposed that enables acquisition of parameters associated with particle transport in grid nodes distributed in the center of the particle path in groundwater. Since the particle tracking path is commonly referred to as streamline, the algorithm and codes developed in this works designated streamline analysis method. The streamline analysis method can be applied in two-dimensional and three-dimensional finite element or finite difference grid networks, and can be utilized not only in the groundwater field but also in all fields that perform numerical modeling.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.291-297
• /
• 2012

In this paper, potential field algorithm was used for path planning in dynamic environment. This algorithm is used to plan a robot path because of its elegant mathematical analysis and simplicity. However, there are some problems. The problems are problem of collision risk, problem of avoidance path, problem of time consumption. In order to solve these problems, we fused potential field with fuzzy system. The input of the fuzzy system is set using relative velocity and location of robot and obstacle. The output of the fuzzy system is set using the weighting factor of repulsive potential function. The potential field algorithm is improved by using fuzzy potential field algorithm and, path planning in various environment has been done.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.69-74
• /
• 2000

Roughness of curved surfaces finished with flexible tools depends on the tool/work contact pressure and area. In this study, non-Hertzian closely conforming elastic contact theory is employed to analyze the tool/work contact and to generate a tool path producing a constant pressure at initial contact points. Finishing experiments on curved surfaced are conducted using the tool path. For comparison, curved surface finishing is also performed along the tool path producing a constant tool/work interference depth. It is demonstrated that the tool path of constant contact pressure improves the finished surface roughness.