• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.179-187
• /
• 2010

The use of high frequency band, broad band and MIMO antenna is expected in the next generation mobile communication system. By the rapid increase of demand for wireless communications and the explosive increase of the mobile communication services, researches for optimization of next-generation mobile communication system are required. In the existing MIMO channel models, propagation-environments are commonly classified into urban, suburban, rural area, etc. However such approaches can have drawbacks in that many different morphologies may exist even in the urban area, for example. In this paper, we introduced path morphology concept, and proposed the method of morphology classification considering the building height, density, etc. Delay spread(DS), angular spread(AS) of AoD and AoA analyzed for each environment using the ray tracing technique. Based on the analysis, a MIMO channel model appropriate in domestic environment was suggested.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.173-177
• /
• 2009

Digital holographic microscopy allows optical path difference measurement. Optical path difference depends on the both refractive index and morphology of sample. We developed a dual-wavelength in-line digital holographic microscope that can measure simultaneously the refractive index and morphology of a sample, providing highly precise three-dimensional information. Here we propose theoretical and experimental methods for dual-wavelength in-line digital holographic microscopy. The measured data were reasonable, although there was data error. By improving the experimental method, we could measure the refractive index more precisely and obtain more accurate three-dimensional information on samples.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.7-24
• /
• 1988

The stable occlusion in function is thought as important as the esthetics in form, in order to preserve the healthy oral condition. The stable occlusion requires the harmony between the condylar guidance factors and the anterior guidance factors. The aim of this study was to evaluate the quantitative relationship between the condylar guidance factors and the anterior guidance factors, estimating statistically the measurement of the condylar paths by Pantronic and those of the anterior guidance factors, craniofacial morphology by roentgenocephalometry in 46 relatively good functional occlusion. The results of this study were as follows. 1. The measurements of the protrusive condylar path inclinations were $36.41^{\circ}$ in the right, $35.63^{\circ}$ in the left, $36.28^{\circ}$ in the mean. The measurements of Fisher's angles were $8.17^{\circ}$ in the right, $6.43^{\circ}$ in the left, $6.87^{\circ}$ in the mean. 2. The anterior facial height and the lower anterior facial height made a negative correlation with the protrusive condylar path inclination. 3. The articular eminence angle relative to the artificial articulator plane showed a positive correlation with the maximum protrusive condylar path. 4. SNA and SNB made a negative correlation with the articular eminence angle, and AAP-GoMe, AAP-DcGn, the facial height ratio had a positive correlation with the articular eminence angle. 5. The angulation of maxillary incisor lingual slope, overbite and the ratio of overbite to overiet showed a positive correlation with the articular eminence angle. 6. The angulation of maxillary incisor lingual slope , overbite, and the ratio of overbite to overjet made a positive correlation with the inclination of occlusal plane, functional occlusal plane. 7. Overbite and the ratio of overbite to overjet had a positive correlation with the angulation of maxillary incisor lingual slope. 8. The anterior guidance factors were more influenced by the mean protrusive condylar path inclination and the maximum Fisher's angle, and the regression equations of those were made.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2374-2385
• /
• 1994

SiCw/Al composite material is especially attractive because of their superior specific strength, specific stiffness, corrosion fatigue resistance, creep resistance, and wear resistance compared with the corresponding wrought Al alloy. In this study, Fatigue crack growth behavior and fatigue crack path morphology(FCPM) of SiC whisker reinforced Al 6061 alloy with 25% SiC volume fraction and Al 6061 allay were performed. Result of the fatigue crack growth test sgiwed that fatigue crack growth rate of SiCw/Al 6061 composite was slower than that of Al 6061 matrix therefore it was confirmed that Sic whisker have a excellent fatigue resistance. And Al 6061 matrix had only FCPM perpendicular to loading direction. On the other hand SiCw/Al 6061 composite had three types in fatigue crack path morphology. First type is that both sides FCPM of artificial notch are perpendicular to loading direction. Second type is that a FCPM in artifical notch has slant angle to loading direction and the other side FCPM is perpendicular to loading direction. Third type is that both sides FCPM of notch have slant angle to loading direction. It was considered that this kinds of phenomena were due to non-uniform distribution of SiC whisker and confirmed by SEM observation for fracture mechanism study.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.2
• /
• pp.194-204
• /
• 2023

Models based on diffusion-limited aggregation (DLA) have been extensively used to explore the mechanisms of dendritic particle aggregation phenomena. The physical and chemical properties of systems in which DLA aggregates emerge are given in their fractal. In this paper, we present a comprehensive study of the growth of electrodeposited copper dendrites in flat plate electrochemical cells from a fractal perspective. The effects of growth time, applied voltage, copper ion concentration, and electrolyte acidity on the morphology and fractal dimension of deposited copper were examined. 'Phase diagram' set out the variety of electrodeposited copper fractal morphology analysed by metallographic microscopy. The box counting method confirms that the electrodeposited dendritic structures manifestly exhibit fractal character. It was found that with the increase of the voltage and copper ion concentration. The fractal copper size becomes larger and its morphology shifts towards a dendritic structure, with the fractal dimension fluctuating around 1.60-1.70. In addition, the morphology of the deposited copper is significantly affected by the acidity of the electrolyte. The increase in acidity from 0.01 to 1.00 mol/L intensifies the hydrogen precipitation side reactions and the overflow path of hydrogen bubbles affects the fractal growth of copper dendrites.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.8
• /
• pp.869-874
• /
• 1999

In this paper, electrochemical techniques are used to investigate hydrothermal-electrochemically formation of barium titanate (BT) ceramic films. For comparison, the electrochemical behaviors of anodic titanium oxide films formed in alkaline solution were also investigated both at room temperature and in hydrothermal condition at 150.0 ℃. Film structure and morphology were identified by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Titanium oxide films produced at different potentials exhibit different film morphology. The breakdown of titanium oxide films anodic growth on Ti electrode plays an important roles in the formation of BT films. BT films can grow on anodic oxide/metal substrate interface by short-circuit path, and the dissolution-precipitation processes on the ceramic film/solution interface control the film structure and morphology. Based upon the current experimental results and our previous work, extensively schematic proce-dures are proposed to model the mechanism of ceramic film formation by hydrothermal-electrochemical method.

• Applied Microscopy
• /
• v.26 no.4
• /
• pp.447-456
• /
• 1996

Fracture surfaces of materials contain useful information ranging from crack path to the mechanism of fracture. Since limitation of electron transparency requires a sample in the form of thin foil for TEM observations, it is impossible to extract such information directly from the fracture surfaces. In this study, the method of surface replication from the ceramic fracture surface is employed to characterize the process of crack propagation in ceramic matrix composites using TEM analysis. The surface replica from the fracture surface in ceramic materials provides detailed surface morphology and more importantly, loosened particles on the fracture surface are collected. Electron diffraction and chemical composition analyses of these particles reveal crack path in the specimen. Furthermore, one can determine the mode of fracture by observing the fracture surface morphology from the image of replica. Two examples are given to illustrate the potential of the surface replication technique. In the first example, apparent toughness increase in $B_{4}C-Al$ composites at high strain rate is investigated by surface replication to elucidate the mechanism of fracture at different strain rates. The polytypes of SiC formed during the sintering of SiC-AlN composite and their effect on the fracture behavior of SiC-AlN composite are analyzed in the second example.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.138-139
• /
• 2006

Sintered steels are materials characterized by residual porosity, whose dimension and morphology strongly affect the fatigue crack growth behaviour of the material. Prismatic specimens were pressed at $7.0\;g/cm^3$ from Astaloy CrM powder and sintered varying the sintering temperature and the cooling rate. Optical observations allowed to evaluate the dimensions and the morphology of the porosity and the microstructural characteristics. Fatigue tests were performed to investigate the threshold zone and to calculate the Paris law. Moreover $K_{Ic}$ tests were performed to complete the investigation. Both on fatigue and $K_{Ic}$ samples a fractographic analysis was carried out to investigate the crack path and the fracture surface features. The results show that the Paris law crack growth exponent is around 6.0 for $1120^{\circ}C$ sintered and around 4.7 for $1250^{\circ}C$ sintered materials. The same dependence to process parameters is not found for $K_{Ith}$.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.60.3-61
• /
• 2016

Galaxy morphology involves complex effects from both secular and non-secular evolution of galaxies. Although it is a final product of galaxy evolution, it gives a clue to the processes that the a galaxy has gone through. Galaxy clusters are the sites where the most massive galaxies are found, and thus the most dramatic merger histories are embedded. Our deep imaging program (${\mu}{\sim}28\;mag\;arcsec^{-2}$), KASI-Yonsei Deep Imaging Survey for Clusters (KYDISC), targets 14 Abell clusters at z = 0.016 - 0.14 using IMACS/Magellan telescope and MegaCam/CFHT to investigate cluster galaxies especially on low surface brightness features related to galaxy interactions. We visually classify galaxy morphology based on criteria related to secular or merger related evolution and find that the morphological mixture of galaxies varies considerably from cluster to cluster. Moreover it depends on the characteristics (e.g. cluster mass) of cluster itself which implies that environmental effects in cluster scale is also an important factor to the evolution of galaxies together with intrinsic (secular) and galaxy merger. Our deep imaging survey for morphological inspection of cluster galaxies with low surface brightness is expected to be a useful basis to understand the nature of cluster galaxies and their internal/external evolutionary path.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1264-1272
• /
• 2016

The accurate estimation of leak rate through cracks is crucial in applying the leak before break (LBB) concept to pipeline design in nuclear power plants. Because of its importance, several programs were developed based on the several proposed flow models, and used in nuclear power industries. As the flow models were developed for a homogeneous pipe material, however, some difficulties were encountered in estimating leak rates for bimaterial pipes. In this paper, a flow model is proposed to estimate leak rate in bimaterial pipes based on the modified Henry-Fauske flow model. In the new flow model, different crack morphology parameters can be considered in two parts of a flow path. In addition, based on the proposed flow model, a program was developed to estimate leak rate for a crack with linearly varying cross-sectional area. Using the program, leak rates were calculated for through-thickness cracks with constant or linearly varying cross-sectional areas in a bimaterial pipe. The leak rate results were then compared and discussed in comparison with the results for a homogeneous pipe. The effects of the crack morphology parameters and the variation in cross-sectional area on the leak rate were examined and discussed.