• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.4
• /
• pp.300-307
• /
• 2003

This paper presents the multi-mode noise reduction of smart panels of which passive piezoelectric shunt damping is introduced. For the piezoelectric shunt damping, a passive shunt circuit composed of inductors and a load resistor is connected to the piezoelectric patch mounted on the panel structure. An electrical impedance model is introduced for the system based on the measured electrical impedance, and the criteria for maximum energy dissipation at the shunt circuit is used to find the optimal shunt parameters. For multi-mode shunt damping, the shunt circuit is modified by the introduction of a block circuit. Also the optimal location of the piezoelectric patch is studied by finite element analysis in order to cause the maximum admittance from the patch for each mode of the structure. An acoustic test is performed for the panels and a remarkable noise reduction is obtained in multiple modes of the panel structure.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.320-323
• /
• 2004

This work investigated fatigue characteristics of aluminum repaired by CFRP composites. Three specimens, cracked aluminum, cracked aluminum patched by CFRP, and plasma-treated aluminum patched by CFRP were used for the fatigue tests. The results showed that the fatigue crack growth behavior of cracked aluminum was improved by repairing the cracked area with composite patch. Specifically, the specimen repaired by composite patch showed about three times more fatigue life than the cracked aluminum. The plasma-treated aluminum repaired by composite patch showed about five times more fatigue life than the cracked aluminum.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.680-683
• /
• 2019

개발자의 부담을 줄이고 소프트웨어의 품질을 향상시키기 위해 APR (Automated Program Repair) 기술을 개선해야 할 필요가 있다. 현재 사용되는 대부분의 APR 기술은 개발자가 수작업으로 작성한 테스트 케이스를 통과하는 유효 패치(Valid Patch)를 만드는 방식을 사용하기 때문에 QoP(Quality of Patch)는 많이 뒤떨어지는 단점을 가지고 있다. 본 논문에서는 테스트 범위가 충분히 높은 테스트 케이스를 자동으로 생성하는 기술을 이용하여 기존의 유효 패치를 강화하는 기술을 제안한다. 제안하는 내용을 Defects4J 의 일부 프로젝트에 적용하여 기존 기법 대비 FL 의 성능은 유지하면서 기존에 찾지 못했던 유효 패치를 추가적으로 찾을 수 있음을 확인하였다.

• The Plant Pathology Journal
• /
• v.21 no.4
• /
• pp.328-333
• /
• 2005

Paenibacillus elgii SD17 (KCTC $10016BP^T$=NBRC $100335^T$) was recently reported as a new species. Based on its inhibitory activity to Thanatephorus cucumeris AG1-1, strain SD17 was further evaluated for its potential as a biocontrol agent against soil-borne diseases of turf grasses in Korea. P. elgii SD17 showed a broad spectrum of antimicrobial activity in vitro test and suppressed development of turf grass diseases; Pythium blight caused by Pythium aphanidermatum and brown patch caused by T. cucumeris AG1-1 on creeping bentgrass (Agrostis palustris) in the growth chamber tests. Under a condition for massive culture in a 5,000 L fermenter, P. elgii SD17 reached $6.4{\times}10^8$ spores/ml that resulted in approximately $1.0{\times}10^7$ cfu/g when formulated into a granule formulation (GR) using the whole culture broth instead of water. Using the GR formulation, biocontrol activity of P. elgii SD17 was confirmed. In the growth chamber tests, the GR formulation was effective against brown patch and Pythium blight with similar level of disease severity compared to each of the standard fungicides at the application rates of 10 g/$m^2$ or above. In the field tests, compared to each untreated control, the GR formulation also effectively controlled Pythium blight, brown patch and large patch at all the application rates of 5, 10 and 20 g/$m^2$, respectively, without significant response by the application rates. However its performance was inferior to each of the standard chemical fungicides. Based on these results, we consider this GR formulation of P. elgii SD17 as an effective biocontol agent to suppress Pythium blight, brown patch and large patch of turf grasses in Korea.

• Toxicological Research
• /
• v.29 no.2
• /
• pp.87-90
• /
• 2013

The potential role of topical valproate (VPA) in hair regrowth has been recently suggested. However, safety reports of VPA as a topical formulation are lacking. Therefore, in the present study, we investigated whether VPA causes skin irritation in humans. We first performed a cell viability test and showed that VPA did not exhibit toxicity toward HaCaT keratinocytes, fibroblasts, and RBL-3H mast cells. We then performed clinical patch test and skin irritation test through transdermal drug delivery with the help of microneedle rollers. No significant findings were obtained in the clinical patch test. In the skin irritation test, only 1 patient showed erythema at 1 hr, but the irritation reaction faded away within a few hours. Erythema and edema were not observed at 24 hr. We concluded that VPA has minimal potential to elicit skin irritation. Therefore, we consider that VPA can safely be applied to human skin.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2091-2099
• /
• 2001

Fatigue crack growth behavior of inclined cracked Al 6061-T6 thick aluminum plate(6mm) repaired with the bonded composite patch was studied. A 0°inclined crack bonded reinforced composite patch and 15°, 30°, 45°, 60°inclined crack plates were tested. The effect of patch and inclined angle were studied and compared to each other. Also we investigated to the crack propagation direction and debonding behavior during the fatigue crack growth test. In this paper. a study was con(ducted to get an fatigue life, fatigue crack growth ratio and crack growth direction. Finally, the effectiveness of composite patch on inclined cracked plate was investigated. The results demonstrated thats there was a definite variation in fatigue life and fatigue crack growth behavior depending on the inclined crack angle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.6
• /
• pp.512-518
• /
• 2008

Guided wave technology is advantageous for fast inspection of pipe wall thinning since the guided wave propagates long distance. In this investigation, the method to evaluate gradual wall thinning in a pipe based on the arrival time delay with magnetostrictive patch transducers is presented. Low frequency A0 Lamb waves were generated and measured by the present transducer and it was applied to arrival time delay measurement experiments on a test pipe having gradual wall thinnings artificially manufactured. From experiments, consistent results that wall thinning increases the arrival time delay of A0 waves were obtained. Consequently, the feasibility of the magnetostrictive patch transducers to evaluate wall thinning was verified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.211-212
• /
• 2007

There have three kinds of partial discharge diagnosis testing: online, offline and dismantled testing on high voltage rotating machine. Our lab testing is dismantled testing, taking off pieces into individual parts of stator coil of high voltage rotating machine in laboratory. We investigate internal discharge, slot discharge, corona discharge and normal state on pre-made stator winding by using spiral patch antenna sensor. In this lab test we compare the experimental results of our spiral patch antenna sensor and reference commercial HFCT sensor.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.828-834
• /
• 2023

In this paper, we studied an antenna that forms a wide beam width by applying a horn-shaped reflector to a patch array antenna. To implement a wide beam width, three patches were arranged in each of the four directions on a square microstrip substrate, and a horn-shaped reflector was applied to the rear of the array antenna. Through this structure, the vertical beam pattern formed from the patch was converted to a diagonal direction, and as a result, the beam widths formed in each of the four sectors were added to create a wide beam width close to a hemisphere. The proposed antenna was studied for application to UAV(unmanned aerial vehicle), and the simulation test results confirmed that the 4.5 dBi beam width was 146.8°.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.415-423
• /
• 2019

In this paper, a design method for a high-sensitivity microstrip patch sensor antenna (MPSA) loaded with a bent-slot was studied for the permittivity measurement. The bent-slot similar to a single-ring complementary split ring resonator was added along a radiating edge of the patch in order to enhance the sensitivity to the permittivity. The sensitivity of the proposed MPSA was compared with that of a conventional rectangular MPSA and a thin rectangular-slotted MPSA. Three MPSAs were designed and fabricated on a 0.76-mm-thick RF-35 substrate so that the input reflection coefficient would resonate at 2.5 GHz in the absence of the superstrate under test. When five different Taconic substrates with a relative permittivity ranging from 2.17 to 10.2 were used as the superstrate under test, experiment results show that the sensitivity of the proposed MPSA, which is measured by the shift in the resonant frequency of the input reflection coefficient, is 4.1 to 6.1 times higher than that of the conventional MPSA.