• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.221-242
• /
• 2023

Internal and external corrosion are common in pressure pipes used in a variety of industries, often resulting in defects that compromise their integrity. This economically and industrially significant problem calls for both preventive and curative technical solutions to guarantee the reliability of these structures. With this in mind, our study focuses on the influence of composite and metallic patch repairs on the limit loads of pipes, particularly elbows, the critical component of piping systems. To this end, we used the nonlinear extended finite element method (X-FEM) to study elbows, a priori corroded on the internal surface of the extrados section, then repaired with composite and metallic patches. In addition, the effect of the geometry of composite materials and metal patches was examined, in particular the effect of their thickness and material on the increase in limit loads of repaired structures. The results obtained provide information on the effectiveness and optimization of patch repair of corroded elbows, with the aim of increasing their service life.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.383-389
• /
• 2017

A small dual-polarized base station antenna with a simple isolation patch is presented. A high isolation is achieved when using a shorted metallic isolation patch. The experimental results indicate that the measured impedance bandwidth of the proposed antenna is 1.72 GHz to 1.89 GHz for small cell systems and that the isolation is more than 30 dB. The proposed antenna exhibits good radiation patterns with a peak gain of 8 dBi.

• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.111-114
• /
• 2015

In this paper, we have proposed dual-band Phi-shaped slot gap filler antenna for satellite internet service applications. Some properties of the antenna such as return loss, radiation pattern, and gain have been simulated and measured. The proposed antenna has a Phi-shaped slot on the circular patch and is fabricated on the TLX-9 substrate. The radius of the circular patch is 25 mm, and it has a coaxial feeding structure. The dual-band Phi-shaped slot gap filler antenna has high-gain, small-size, simple-structure, and good radiation patterns at each band. The operating frequency band can be tuned by adjusting the length AL and FL of the Phi-shaped slot.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.366-372
• /
• 2002

A wideband stacked patch antenna fed by an L-strip feeder is studied experimentally. The objective of this paper is to design small wideband antenna for PCS and IMT-2000 service. Experimental results confirm that an impedance bandwidth(VSWR$\leq$2) of 704.7 MHz(35.95 %) is achieved at PCS and IMT-2000 frequency band. The studied antenna can be designed easily for extension of away because it has simple structure.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.89-95
• /
• 2008

Fatigue cracked components often needs to be repaired during service. Standard repair schemes involve strengthening the component by connecting reinforcing members by means of rivets or welding by reducing the crack-tip stress intensity factors. Recent technological advances in fiber reinforced composite materials and adhesive bonding have led to the development of efficient repair schemes. In this study, the influence of various shape parameters on fatigue crack growth in the CCT type uniform thickness plates and the thin-ta-thick type stiffened panels repaired with woven fabric type Kevlar-Epoxy composite patch are studied experimentally.

• Journal of Society of Preventive Korean Medicine
• /
• v.22 no.1
• /
• pp.45-59
• /
• 2018

Objectives : The purpose of this study is to present trends and contents of herbal Korean Medicine patches by analyzing the herbal patches in Korean patents. Methods : Electronic search for herbal patch patents was conducted in KIPRIS (Korea Intellectual Property Rights Information Service). Korean patents that were registered by January 1, 2018 were selected in study. Patents that were not using herbal medicine or not related to patch were excluded in this study. The applicant, application date, International Patent Classification (IPC), contents and adhesive site of patches, target diseases, model of experiment and extraction methods were analyzed. Results : A total of 17 patents were included in this study. In applicant analysis, 61.5% of applicants were corporations. All IPCs in patents were involved in Section A (Human necessities & Agriculture) and 66.7% of IPCs were A61K (Preparations formedical, dental, ortoiletpurposes). In types of patch, 8 patents were hydrogel patches (47.1%), followed by 3 heating patches (17.6%). Skin related symptoms were the most targeted diseases (52.9%), Human was the most used model in experiments. Solvent extraction and hot water extraction were used frequently, and some patents had no limit for extraction were also existed. Conclusions : The study results will be helpful to diversify formulation of herbal medicine, to expand market scale of patent and to develop new application using Korean medicine. In order to establish sufficient data for utilizing patent technologies, more patent studies providing analyzed patent information are needed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.426-435
• /
• 2002

In this paper we present an indoor propagation model for indoor wireless LAN service in the ISM band. We primarily use a 3D ray tracing as well as a patch scattering model in order to take into account the indoor fixtures. Therefore input parameters such as indoor environment parameters and antenna's types, polarizations are considered. As the results, we present fading characteristics and rms delay spread from time delay spread. In order to investigate the accuracy of the presented model, comparisons of predictions with measurement and simulations are performed in indoor wireless LAN service environments. The results show that measurements and simulations are very similar. Therefore in this paper, the effect of presented indoor propagation model is confirmed.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.87-97
• /
• 2018

Turfgrass provides various beneficial effects to our societies such as recreation, aesthetic components, and other public service. Diseases in turfgrass is the major issue, which cause quality problems in golf courses, playgrounds, parks and cultivation areas, and tremendous cost is required to prevent the diseases. Research activity and investigation for turfgrass disease remain to be further attributed when compared to other crops in Korea. In this study, we present previously reported turfgrass diseases researches, especially caused by fungal pathogens, and review the history of turfgrass research activity in Korea to contribute future turfgrass research direction. Research papers were searched and analyzed using Korea Educational and Research Information Service (www.riss.kr). More than eighty papers presented turfgrass diseases and among the papers, 50% were published in Korean Journal of Turfgrass. Half of the papers reported turfgrass diseases control. Research articles about large patch disease were the majority (36%), followed dollar spot (18%), Pythium blight (10%) and Typhular blight (8%). Number of the first disease reports in Korea were total fifteen. Total 542 fungicides have been registered in Korea to prevent turfgrass diseases and most of the fungicides were for brown patch, rust, yellow patch, dollar spot, snow mold, summer patch, anthracnose, Pythium blight, powdery mildew and algae. And we will also need to conduct ecological studies on turf diseases and to develop control methods with improved efficacy and environmentally-friend sound. Researches on epidemiology of turfgrass diseases which deals with the incidence, distribution, and interactions with other factors will be also greatly favored for precise control prescription, timing of control and use of less pesticides.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.867-873
• /
• 2016

Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. The fabricated antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.75-76
• /
• 2016

Even if ICS(Interference Cancellation System) repeater is used in wireless communication system, it has the disadvantage that it must have enough distance between Donor and Service antenna to be isolated. In this paper, new ICS repeater integrated antenna with high insolation characteristics is designed. The proposed antenna is fabricated for 800MHz and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. This antenna has a return loss less than -13 dB, a gain over 3 dBi, and an isolation between the donor and the server antennas less than -56 dB from 824~894 MHz for CDMA mobile communication. Therefore, the proposed antenna structure can be applied to eliminate the shadow area and to expand the coverage area for any other wireless communication bands.