• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.8
• /
• pp.726-733
• /
• 2004

On-line phase tracking of an extrinsic Fabry-Perot interferometer (EFPI) and experimental vibration control of a composite beam with a sensing-patch are investigated. We propose a sensing-patch for the compensation of the interferometric non-linearity. In this paper. a sensing-patch that comprises an EFPI and a piezo ceramic(PZT) is fabricated and the characteristics of the sensing-patch are experimentally investigated. A simple and practical logic is applied for the real-time tracking of optical phase of an interferometer Experimental results show that the proposed sensing-patch does not have the non-linear behavior of conventional EFPI and hysteresis of piezoelectric material. Moreover, it has good strain resolution and wide dynamic sensing range. Finally, the vibration control with the developed sensing-patch has been performed using Fuzzy logic controller, and the possibility of sensing-patch as a sensoriactuator is considered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1233-1238
• /
• 2003

In this paper, radially corrugated circular-type microstrip patch antenna was devised and manufactured for GPS (center frequency: 1.575 GHz). Radially corrugated circular-type microstrip patch antenna having radiational corrugation-patch contributed to add size reduction ratio by lowering the resonant frequency because the edge current also has the extended and perpendicular path. As a result, radially corrugated circular-type microstrip patch antenna has 28 % area reduction than planer circular-type patch antenna for linear polarization and 27.7 % area reduction than planer circular-type patch antenna for circular polarization. Radially corrugated circular-type microstrip patch antenna is suitable for miniaturized receive antenna for GPS which has the characteristic of gain 2.1 dBd, axiai ratio 1.3 dB, 2 dB axial bandwidth 15 MHz(0.9 %).

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.25 no.4
• /
• pp.250-258
• /
• 2018

Purpose: This study was done to assess the influence of application time of Lidocaine patch on pain intensity following venipuncture in hospital. Methods: The participants were 31 adult patients admitted to J hospital in G city. Patients' anxiety, blood pressure and pulse were measured when no patch was applied and when a patch was applied. To evaluate the pain intensity and physiological index caused by venipuncture, blood pressure, pulse and pain intensity were checked for patients in the no patch group, and for a 5 minutes of application and 30 minutes application patch. Pain was evaluated using a visual analogue scale, anxiety using the Profile of Mood states developed McNair et al. and modified by Lee. Data were analyzed using one-way repeated measures ANOVA with the SPSS 21.0 program. Results: Anxiety and pain were significantly reduced when a lidocaine patch was applied following venipuncture. There was no significant difference in pain intensity whether the lidocaine patch application is for 30 minutes or application for 5 minutes. Conclusion: Results of this study show that application of lidocaine patch can be used as a nursing intervention for pain reduction by showing that there is no need to wait a long time for pain to be reduced.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.472-483
• /
• 2021

With increased development of patch graft, the number of repair using patch graft in massive rotator cuff tear has increased. Understanding characteristics of various patch graft might be helpful for selection of type of patch, and to improve the outcomes for the treatment of massive rotator cuff tears using patch grafts. Therefore, this paper reviews various studies dealing with clinical outcomes of rotator cuff repair using diverse patch grafts in massive rotator cuff tears.

• Animal cells and systems
• /
• v.3 no.2
• /
• pp.143-147
• /
• 1999

Annual production and redistribution of leaf litter were compared among three distinct understory patches in a temperate hardwood forest dominated by Quercus mongolica, Kalopanax pictus, Acer pseudo-sieboldianum, and Carpinus cordata. Two patches were located on a southwest-facing slope: one with an understory dominated by herbaceous plants (Patch S), and the other covered with evergreen dwarf bamboo, Sasa borealis (patch SS). The third patch was on the opposite slope with an understory dominated by herbaceous plants (Patch N). Annual leaf litterfall was averaged 330 g m$^{-2} yr$^{-2}$ in the three patches from 1994 to 1998. From mid-September 1996 to mid-September 1997, net transport of leaf litter over patch bound-aries was 1,824g m$^{-1}$ from Patch S to SS, 1,465g m$^{-1}$ from Patch S to N, and 886 g m$^{-1}$ from Patch SS to N. The amounts moving downslope out of Patch S, SS, and N were 2,548, 471, and 588g m$^{-1}$, respectively. When a mass balance approach was employed for the data of leaf litter transport, the results were relatively consistent with 216, 631, and 724g m$^{-2}$ of leaf litter stores in Patch S, SS, and N, respectively, in April 1997. This study suggests that leaf litter redistribution is largely regulated by aspect and understory type and exerts a significant effect on carbon processes in the forest ecosystem.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.80-89
• /
• 2008

Patch antennas with an array of pins interconnecting the patch and the ground (Pin array patch antennas) are fabricated and their characteristics are measured. The radiation characteristics of pin array patch antennas are compared to those of conventional patch antennas. The suppressions of the radiation in horizontal directions in E-plane and H-plane are more than 10 dB and 4 dB, respectively. The forward radiation is increased, while the backward radiation is decreased. The directivity is improved because the half-power beamwidth of radiation patterns in both E-plane and H-plane is reduced. The resonance frequency of a pin array patch antenna increases as the pin radius of a pin amy patch antenna increases. An optimum pin radius of a pin array patch antenna exists for the maximum suppression of the radiation in horizontal directions.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.1-9
• /
• 2014

Image inpainting is the widely used technique to restore a damaged region or to fill a hole in an image. The exemplar-based technique effectively generates new texture by copying colour values of the most correlated patch in the source into the empty region of the current patch. In traditional exemplar-based synthesis, the patch correlation is computed using only the already filled pixels of the current patch. Thus, by ignoring the correlation between the hole regions of the two patches, an undesirable patch which is highly correlated with the current patch in the already filled area but considerably dissimilar in the area to be filled can be selected, which results in bad texture propagation. To avoid such problems, a new exemplar-based inpainting method using patch extrapolation is proposed. The empty part of the current patch is extrapolated beforehand, and then the complete patch is used for finding its exemplar. Experimental results show that the proposed method provides more natural synthesis results than the conventional ones.

• Asian Journal of Turfgrass Science
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2010

We investigated occurrence of yellow patch for early spring season of 48 cultivars in 5 species of turfgrass, most popularly used in Korea golf courses. Only yellow patch disease caused by Rhizoctonia cerealis was occurred naturally from late fall season. Perennial ryegrass and creeping bentgrass cultivars showed susceptibility from yellow patch in early spring, respectively. However, among There was no significantly different between the other species. Creeping bentgrass, 'Pennlinks II' cultivar was the most susceptible. Yellow patch symptom showed reddish brown with margins in color and patch showed size from 5 cm to 50 cm in diameter. Based on our results, Yellow patch showed large differences among cultivar and each turfgrass species.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.6
• /
• pp.1393-1399
• /
• 2018

Companies that use a variety of software use patch management systems provided by security vendor to manage security vulnerabilities of software to improve security. System administrators monitor the vendor sites that provide new patch information to maintain the latest software versions, but it takes a lot of cost and monitoring time to find and collect patch information because the patch cycle is irregular and the structure of web page is different. In order to reduce this, studies to automate patch information collection based on keyword or web service have been conducted, but since the structure to provide patch information in vendor site is not standardized, it was applicable only to specific vendor site. In this paper, we propose a system that automates the collection of patch information by analyzing the structure and characteristics of the vendor site providing patch information and using web crawler to reduce the cost and monitoring time consumed in collecting patch information.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1141-1149
• /
• 2020

Most of the industrial control network is an independent closed network, which is operated for a long time after installation, and thus the OS is not updated, so security threats increase and security vulnerabilities exist. The zero-day attack defense must be applied with the latest patch, but in a large-scale industrial network, it requires a higher level of real-time and non-disruptive operation due to the direct handling of physical devices, so a step-by-step approach is required to apply it to a live system. In order to solve this problem, utility-specific patch impact assessment is required for reliable patch application. In this paper, we propose a method to test and safely install the patch using the regression analysis technique and show the proven results. As a patch impact evaluation methodology, the maximum allowance for determining the safety of a patch was derived by classifying test types based on system-specific functions, performance, and behavior before and after applying the patch. Finally, we report the results of case studies applied directly to industrial control networks, the OS patch has been updated while ensuring 99.99% availability.