• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.354-361
• /
• 2007

Statement of Problems. The precision of fit between the bearing surfaces of implant abutments and the prosthesis framework has been considered fundamental to implant prosthodontic protocol. Purpose. The study aimed to investigate the effect of laboratory procedure on the dimensional accuracy of cast implant bars. Material and methods Thirty implant bars were fabricated on a metal master model. The gap distances were measured at the right implant abutment replica-gold cylinder interface after casting procedure. The bar length data of precasting and postcasting state were collected and analyzed. Results. The mean gap distance found after casting was $106.3{\mu}m$ for buccal side, $122.1{\mu}m$ for distal side and $117.1{\mu}m$ for the lingual side. The mean bar length was $17964.7{\mu}m$ at precasting measurement, $17891.6{\mu}m$ at postcasting measurement. The mean change of bar length was $-73.1{\mu}m$. Conclusion. Even though the techniques used in this study strictly followed the guidelines established in the literature, the 30 cast implant bars evaluated all yielded gap distances that were beyond acceptable accuracy. There was a statistically significant difference between precasting and postcasting bar length (P<0.01). There was a decreasing tendency in bar length after casting procedure. It was necessary to correct this dimensional change from laboratory procedure by some corrective methods.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.325-333
• /
• 2016

The development of smart technology has brought the conversion of closed traditional e-learning contents into open flexible smart learning contents consisting of learner-centered modules, without the constraints of time and space by use of smart devices from the uniformed and passive classroom between teachers and learners. It has been demanded an open, personalized and customized teaching and learning contents of smart education and training systems according to wide supply of various smart devices. In this paper, we discuss about the status of the smart teaching and learning systems and analyze the characteristics and structure of the web contents for smart education and training systems by use of smart devices. And we propose a method how to block web contents, to extract them, and adapt personalized segments of web contents by adaptive algorithm into smart learning devices. We extract blocks from the web contents based on the smart device information and the preference information of the learners from existing web contents without the hassle of learners environment. After specifying a block priority from the extracted web contents by the adaptive segment algorithm, it can be displayed directly to the screen to fit the individual learning progress of the learners.

• The Journal of Advanced Prosthodontics
• /
• 제7권3호
• /
• pp.207-213
• /
• 2015

PURPOSE. The purpose of this study was to examine the abutment screw stability of screw- and cement-retained implant-supported dental prosthesis (SCP) after simulated cement washout as well as the stability of SCP cements after complete loosening of abutment screws. MATERIALS AND METHODS. Thirty-six titanium CAD/CAM-made implant prostheses were fabricated on two implants placed in the resin models. Each prosthesis is a two-unit SCP: one screw-retained and the other cemented. After evaluating the passive fit of each prosthesis, all implant prostheses were randomly divided into 3 groups: screwed and cemented SCP (Control), screwed and non-cemented SCP (Group 1), unscrewed and cemented SCP (Group 2). Each prosthesis in Control and Group 1 was screwed and/or cemented, and the preloading reverse torque value (RTV) was evaluated. SCP in Group 2 was screwed and cemented, and then unscrewed (RTV=0) after the cement was set. After cyclic loading was applied, the postloading RTV was measured. RTV loss and decementation ratios were calculated for statistical analysis. RESULTS. There was no significant difference in RTV loss ratio between Control and Group 1 (P=.16). No decemented prosthesis was found among Control and Group 2. CONCLUSION. Within the limits of this in vitro study, the stabilities of SCP abutment screws and cement were not significantly changed after simulated cement washout or screw loosening.

• The Journal of Advanced Prosthodontics
• /
• 제7권3호
• /
• pp.264-270
• /
• 2015

This report describes the case of an edentulous patient with an atrophic maxilla and severe class III malocclusion. Prosthetic rehabilitation was performed using CAD/CAM techniques for manufacturing an implant-supported overdenture with horizontal insertion. A vestibulo-lingual insertion overdenture is a precision prosthesis with a fixation system affording a good fit between the primary and secondary structure. Both structures exhibit passive horizontal adjustment. This treatment option requires the same number of implants as implant-supported fixed dentures. The horizontal assembly system prevents the prosthesis from loosening or moving in response to axial and non-axial forces. The technique was used to rehabilitate a patient presenting an atrophic upper maxilla, with the insertion of 8 implants. No complications were reported at follow-up 3, 6 and 12 months after fitting of the prosthesis. This system offers solutions to the clinical and laboratory complications associated with hybrid prostheses, concealing emergence of the chimneys and improving implant-prosthesis hygiene.

• 컴퓨터교육학회논문지
• /
• 제19권6호
• /
• pp.81-89
• /
• 2016

사회적 기술적 환경이 급변함에 따라 수동적인 지식습득자였던 학습자는 주어진 정보를 단순히 기억하고 재생하는 차원을 넘어 실생활의 현상을 비판적으로 파악하고 창의적인 문제해결력이 필요하게 되었다. 이는 새로운 형태의 교육목표 및 내용, 교육방법과 평가방법과 더불어 교육환경도 함께 요구됨을 의미한다. 변화된 교육패러다임에 부합하는 스마트교육에 대해 분석하고, 스마트교육모형에 의거 고등학교 정보윤리부분 '정보보호와 보안' 단원에 해당하는 교수-체험형 교육콘텐츠를 개발하여 수업에 적용해 봄으로써 스마트교육이 정보통신윤리의식에 미치는 영향을 알아보고자 하였다.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.331-337
• /
• 2014

전통적인 바와 클립 유지형 피개의치의 경우, 인상채득 및 기공과정에서 오차가 생길 수 있어 바가 nonpassive fit하게 제작될 수 있다. 최근에 나온 기성품 바 어태치먼트 시스템인 SFI-Bar (Stress Free on Implant Bar) system (Cendres+Metaux, Biel/Bienne, Switzerland)은 튜브바로 연결하여 조립하는 방식이므로 밀링방식이나 캐스팅방식에서 겪을 수 있는 작업상의 많은 어려움과 긴 작업 시간의 단점을 보완 할 수 있고, 임플란트 주위골에 가해지는 스트레스도 줄여줄 수 있다. 본 증례에서는 골흡수가 심한 상악 무치악 환자에게 최근에 나온 stress free implant bar인 SFI-Bar system을 사용한 피개 의치로 수복하였다. SFI Bar를 이용한 피개의치 제작시 수동적 적합을 얻을 수 있어 임플란트에 스트레스를 덜 가하는 장점을 얻을 수 있을 것으로 생각한다. 추후 정기적인 검사를 통해 장기적인 결과에 대한 평가가 필요하리라 사료된다.

• 대한치과의사협회지
• /
• 제50권8호
• /
• pp.474-481
• /
• 2012

The periodontal flap surgery is the most widely utilized surgical procedure to reduce the pocket depth and to access the subgingival root surfaces for scaling and root planing. The diagnosis of the periodontal lesion and the objective of the surgery will dictate the type of flap procedure which will be utilized to obtain the best result. The incisions, type of flap and the selection of suturing design must be planned and executed to fit the problem. Periodontal flaps are designed to preserve gingival integrity and to gain access to root surfaces for residual calculus removal and to thoroughly remove granulation tissue so bone defects can be visualized and treated. Gentle and efficient procedures result in optimum healing and minimal postoperative pain. When flaps need to be repositioned apically or less often, coronally, then the flaps must sit passively at the appropriate level before suturing. To ensure this, buccal and lingual flaps need to be elevated beyond the mucogingival junction so the elasticity of the mucosa allows for flap mobility. Sometimes it may be necessary to extend the flap elevation apically with a split incision approach to minimize the effect of the less elastic periosteum. Vertical incisions can aid in flap positioning by allow ing the clinician to suture the flap at a different level to the adjacent untreated gingiva. In osseous periodontal surgery, flaps are apically positioned to minimize postoperative pocket depth. In regenerative periodontal surgery including implant surgery, soft tissue cove rage of bony defects, graft materials, membranes, and bio logic agents is important so sulcular incisions and light suturing techniques are crucial.

• Smart Structures and Systems
• /
• 제17권5호
• /
• pp.819-835
• /
• 2016

In this paper, the activities carried out within the EU funded Clean Sky Joint Technology Initiative (JTI GRA) Project and aimed at developing a morphing flap, are illustrated. The reference device is a regional aircraft single slotted flap, enhanced with deforming capabilities to obtain improved hyper-lift performance. The design started with the identification of the internal architecture, intended to allow camber variations. A concentrated-hinge architecture was selected, for its ability to fit different curvatures and for the possibility of easily realizing an "armadillo-like" configuration, then avoiding the use of a complicate deformable skin. The flap layout is made of segmented ribs, elastically hinged each other and span-wise connected by conventional spars. Relative rotations of the rib elements are forced by SMA structural actuators, i.e., cooperating in the external loads absorption. Super-elastic SMA are used to make up recovery elastic elements, necessary to regain the original shape after activation. These further elements in turn contribute to the overall flap rigidity. After assessing the hinge number and the size of the SMA active and passive elements, the advanced design phase was dealt with. It was aimed at solving manufacturing issues and producing the executive drawings. The realized demonstrator was finally tested in lab conditions to prove its functionality in terms of whether target shape actuation or attained shape preservation under loads. On the basis of the numerical results and the experimental outcomes, precious hints were obtained for further developments of the concept.

• 한국멀티미디어학회논문지
• /
• 제4권5호
• /
• pp.377-389
• /
• 2001

최근의 웹 환경 확산으로 웹을 기반으로 하는 워크플로우 시스템의 구축경향이 높다. 워크플로우 시스템에서 중요한 기능은 미리 정의된 규칙, 절차 및 조건에 따라 작업흐름을 자동화하는 것으로 정보흐름에 있어서 수동적인 작업을 배제하고 GUI 방식을 지원하며 정보처리의 이동성이 고려되어야 한다. 특히 분산된 업무조직의 작업흐름을 위한 분산워크플로우 시스템은 웹 환경에 있어서 프로세스 로직에 따른 태스크간의 이동제어와 결함허용 및 실시간적 처리가 가능해야 한다. 그러나 기존의 메일 시스템은 전송위주로서 작업흐름을 자동화하려는 경우에 적합하지 못하다. 이러한 문제를 해결하기 위하여 작업흐름 설계가 가능하고 작업흐름제어를 자동화 할 수 있는 분산워크플로우 엔진이 필요하다. 본 논문에서는 웹 메일을 이용하여 작업흐름을 그래픽 인터페이스로 작성하고 이를 절차적 수행이 가능한 스크립트 코드를 생성하는 브라우저를 작성하였으며, 분산환경에서 태스크 처리를 위한 프로세스 스케쥴러 및 서버노드의 결함 발생시 이를 허용하는 전처리기를 지닌 프로세스 엔진을 설계하였다. 이 이스템은 서버의 결함이나 사용자의 부재시 처리를 대행하므로 시스템의 신뢰성과 가용성을 향상시키고, 데이터베이스 기반 워크플로우 시스템보다 비용을 감소시킨다.

• 대한치과보철학회지
• /
• 제32권3호
• /
• pp.445-454
• /
• 1994

Osseointegrated implant prostheses are to provide normal function without compromising the unique interaction between the tissue and the implant. The essential requirement for the osseointegrated implant prostheses is passive fit of abutment. Therefore, the impression must be accurate and reproduciable since the resultant master cast precisely duplicates the clinical condition. The purpose of this study was to compare the accuracy of the master casts obtained from five impression techniques. Group 1 : To take impression with indirect technique and Impregum F. Group 2 : To take impression with unsplinted direct technique and Impregum F. Group 3 : To take impression with splinted direct technique and Impregum F. Group 4 : To take impression with unsplinted direct technique and Xanthano. Group 5 : To take impression with splinted dierct technique and Xanthano. The results were as follow : 1. In taking impression of Impregum F, there was no significant difference between to use of indirect technique and unsplinted direct technique.(p<0.05) 2. Unsplinted direct technique with Impregum F is less accurate than splinted direct technique with Impregum F or Xanthano and unsplinted direct technique with Xanthano.(p<0.05). 3. There was no significant difference between splinted direct technique with Impregum F and unsplinted direct technique with Xanthano.(p<0.05) 4. Splinted direct technique reproduce more accurate than unsplinted direct technique.(p<0.05) 5. Impression plaster produced less distortion than polyether.(p<0.05) As a result, splinted direct technique with Xanthano was the most accurate technique. As a result, splinted direct technique with Xanthano was the most accurate technique in this study. In addition to dimensinal changes in the materials used, positional errors were also attributed to the mechanical components used in the transfer porocess. Although the errors measured were relatively small, this study demonstrates the potential for distortions with the transfer technique used. Further study is indicated that ?the technique will be able to reproduce the intraoral relationship of implant fixtures reliably and predictably.