• Smart Structures and Systems
• /
• 제23권5호
• /
• pp.449-466
• /
• 2019

Cable-stayed bridges are attractive due to their beauty, reducing material consumption, less harm to the environment and so on, in comparison with other kinds of bridges. As a massive structure with long period and low damping (0.3 to 2%) under many dynamic loads, these bridges are susceptible to fatigue, serviceability disorder, damage or even collapse. Tuned Mass Damper (TMD) is a suitable controlling system to reduce the vibrations and prevent the threats in such bridges. In this paper, Multi Tuned Mass Damper (MTMD) system is added to the Ahvaz cable stayed Bridge in Iran, to reduce its seismic vibrations. First, the bridge is modeled in SAP2000 followed with result verification. Dead and live loads and the moving loads have been assigned to the bridge. Then the finite element model is developed in OpenSees, with the goal of running a nonlinear time-history analysis. Three far-field and three near-field earthquake records are imposed to the model after scaling to the PGA of 0.25 g, 0.4 g, 0.55 g and 0.7 g. Two MTMD systems, passive and active, with the number of TMDs from 1 to 8, are placed in specific points of the main span of bridge, adding a total mass ratio of 1 to 10% to the bridge. The parameters of the TMDs are optimized using Genetic Algorithm (GA). Also, the optimum force for active control is achieved by Fuzzy Logic Control (FLC). The results showed that the maximum displacement of the center of the bridge main span reduced 33% and 48% respectively by adding passive and active MTMD systems. The RMS of displacement reduced 37% and 47%, the velocity 36% and 42% and also the base shear in pylons, 27% and 47%, respectively by adding passive and active systems, in the best cases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.737-742
• /
• 2007

The method of the reducing duct noise can be classified by passive and active control techniques. However, passive control has a limited effect of noise reduction at low frequencies (below 500Hz) and is limited by the space. On the other hand, active control can overcome these passive control limitations. The active control technique mostly uses the Least-Mean-Square (LMS) algorithm, because the LMS algorithm can easily obtain the complex transfer function in real-time particularly when the Filtered-X LMS (FXLMS) algorithm is applied to an active noise control (ANC) system. However, the convergence performance of the LMS algorithm decreases slightly so it may delay the convergence time when the FXLMS algorithm is applied to the active control of duct noise. Thus the Co-FXLMS algorithm was developed to improve the control performance in order to solve this problem. The Co-FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Co-FXLMS algorithm is presented in comparison with the FXLMS algorithm. Simulation results show that active noise control using Co-FXLMS is effective in reducing duct noise.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.49-55
• /
• 2016

각종 전기전자 시스템에서 발생하는 EMI 성분을 공통성분 (CM) 과 차동성분 (DM) 으로 분리하기 위해서 수동분리기와 능동분리기를 연구하였다. CM과 DM 성분 분리기는 능동 EMI 필터를 효과적으로 구현하는데 중요한 요소이다. 수동분리기는 인덕터값을 실현하는데 있어 기술적으로 쉽고 가격이 저렴한 장점이 있으나 상대적으로 큰 오차값이 발생하여 정밀 제작이 요청되므로 부피가 커지고 core의 선택이 어려워지는 단점이 있다. 능동분리기는 OP-Amp를 이용하기 때문에 부피가 작아지고 CM, DM 분리의 정확도를 높일 수 있는 장점이 있으나 주파수 특성이 광대역이어야 하고 가격이 비싸며 별도 DC 전원이 요청되는 단점이 있다. 본 연구에서는 기존의 수동 분리기와 새롭게 제안한 능동 분리기를 적용한 각각의 EMI 필터의 특성을 분석하였다. 따라서 높은 정밀도가 필요한 고가의 장비에는 능동 분리기를 사용하는 것이 정밀도를 개선하는데 유리하며, 일반적인 용도로 저렴한 가격이 요청되며 충분한 설계 면적을 활용할 수 있고 높지 않은 정확도에서도 동작 가능하다면 수동 분리기가 더 바람직하다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1036-1045
• /
• 2016

This paper presents a novel control strategy for passive output filter reduction using an active output filter. The proposed method achieves the dual-function of regulating the output voltage ripple and output voltage variation during load transients. The novel control strategy allows traditional simple voltage controllers to be used, without requiring the expensive current sensors and complex controllers used in conventional approaches. The proposed method is verified with results from a 125-W forward converter.

• Smart Structures and Systems
• /
• 제19권4호
• /
• pp.351-360
• /
• 2017

Protection of structures against natural hazards such as earthquakes has always been a major concern. Semi-active control combines the reliability of passive control and versatility and adaptability of active control. So it has recently become a preferred control method. This paper proposes an algorithm based on Uniform Deformation Theory to mitigate vulnerable buildings using magneto-rheological (MR) damper. Due to the successful performance of fuzzy logic in control of systems and its simplicity and intrinsically robustness, it is used here to regulate MR dampers. The particle swarm optimization (PSO) algorithm is also used as an adaptive method to develop a fuzzy control algorithm that is able to create uniform inter-story drifts. Results show that the proposed algorithm exhibited a desirable performance in reducing both linear and nonlinear seismic responses of structures. Performance of the presented method is indicated in compare with passive-on and passive-off control algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2120-2122
• /
• 1997

SRM converter is divided into active power converter and passive power converter. Current and torque characteristics for representative active and passive converter are analyzed. Through simulation and experiments, several characteristics are confirmed and compared with each other.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1431-1441
• /
• 2017

The Fukushima accident reveals the vulnerability of existing active nuclear power plant (NPP) design against prolonged loss of external electricity events. The passive safety system is considered an attractive alternative to cope with this kind of disaster. Also, the passive safety system enhances both the safety and the economics of NPPs. The adoption of a passive safety system reduces the number of active components and can minimize the construction cost of NPPs. In this paper, reflecting on the experience during the development of the APR+ design in Korea, we propose the concept of an innovative Power Reactor (iPower), which is a kind of passive NPP, to enhance safety in a revolutionary manner. The ultimate goal of iPower is to confirm the feasibility of practically eliminating radioactive material release to the environment in all accident conditions. The representative safety grade passive system includes a passive emergency core cooling system, a passive containment cooling system, and a passive auxiliary feedwater system. Preliminary analysis results show that these concepts are feasible with respect to preventing and/or mitigating the consequences of design base accidents and severe accidents.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.401-408
• /
• 2006

An optimum design method for hybrid control systems is proposed in this study. By considering both active and passive control systems as a combined or a hybrid system, the optimization of the hybrid system can be achieved simultaneously. In the proposed approach, we consider design parameters of active control devices and the elements of the feedback gain matrix as design variables for the active control system. Required quantity of the added dampers are also treated as design variables for the passive control system. In the proposed method, the cost of both active and passive control devices, the required control efforts and dynamic responses of a target structure are selected as objective functions to be minimized. To effectively address the multi-objective optimization problem, we adopt a preference-based optimization model and apply a genetic algorithm as a numerical searching technique. As an example to verify the validity of the proposed optimization technique, a wind-excited 20-storey building with hybrid control systems is used and the results are presented.

• 보존과학연구
• /
• 통권35호
• /
• pp.25-44
• /
• 2014

이 연구에서는 유물 전시관을 대상으로 Active type과 Passive type에 의한 VOCs의 측정 분석법을 사용하여 전시실 내 외의 연중, 계절별 농도를 조사하고 측정방법에 따른 농도 비교를 통해 측정방법 간의 상관성을 비교하였다. 그 결과, Active type에 의한 전시실 TVOC의 연중 평균 농도는 $906.5{\mu}g/m^3$으로 대부분 조사 기간 동안 환경부 기준을 1.8배 이상 초과하였다. Active type에 의한 전시실의 ${\Sigma}VOCs$ 농도는 Passive type 보다 높았다. 일부 VOCs는 시간의 경과에 따라 감소하나 일시적인 상승 경향을 나타내기도 했다. Active type에 의한 전시관의 연평균 I/O비는 TVOC 9.0, ${\Sigma}VOCs$는 34.0으로 조사되어 ${\Sigma}VOCs$가 전시실 내부에서 다량 발생하는 것을 확인하였다. 두 방법 간의 상관성 분석 결과, ${\Sigma}VOCs$의 상관계수는 0.367이었으며 톨루엔은 0.567로 두 분석 방법 간의 연관성이 가장 큰 것으로 조사되었다.

• 음성과학
• /
• 제10권2호
• /
• pp.207-221
• /
• 2003

Phonetic voicing does not support the phonological distinction of voiced/voiceless in English stops. The present study is aimed at defining the nature of voicing of English voiced stops. A review of the literature reveals that the voicing is position-conditioned and its length is notably inconsistent relative to the closure duration. No consistent relationships are found between vocal fold adduction and glottal pulsing in initial position. Stress reduced the voicing, etc. The hypothesis for experiments was: (1) active voicing: stress generates longer (stronger) voicing during the closure duration of a voiced stop; (2) passive voicing: stress induces shorter (weaker) voicing during the closure. Instead the voiced stop becomes more voiced when the preceding vowel (syllable) is stressed. The literature review and the results of two experiments comparing English and Slovakian suggested that the voicing of English voiced stops is passive (i.e., a coarticulation of glottal pulsing for adjacent vowels-syllables) and should be distinguished from active voicing in some other languages.