• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.734-739
• /
• 2001

In this paper, the technique of analysis and optimization on the Passive intermodulation(PIM) in a filter using coaxial transmission resonator, is presented. The developed simulation technique can reduce PIM power without the degradation of the linear filter response, through the variation of filter dimensions. The increase of PIM in filter is depended on currents flowing through each resonator forming filter. The reduction of these currents therefore makes the reduction of PIM power.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1193-1200
• /
• 2016

In this paper, we developed a system for measuring a passive intermodulation distortion signal of the mobile communication RF module having a wide band characteristic. The Broadband was designed to represent the characteristics of the receiver to meet the low noise characteristics and wideband characteristics in the RF receiver were to represent a wide dynamic range(high dynamic range)from the RF receiving end. PIMD designed passive intermodulation distortion signal measured by applying the FPGA / DSP in the system was measured to record the program on the PC. Variable up to 650MHz-2700MHz showed up to-138dBc measured PIMD3.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.63-66
• /
• 2003

Resident mobile communication system technology has been developed. But, surged high voltages in antenna generally have damaged mobile communication. To solve this problem, we use arrester in Rx-Tx line system. That is, the arrester is to protect devices in system against considerable over-voltages or lighting strike. Currently, system protection using of arrester has been arrived in content level but these days, the fact of PIMD(Passive Intermodulation Distortion) which is RF passive components' nonlinear characteristic has appeared. This paper describes PIMD' causes occurred in arrester-estimated from Gas tube capsule, plating, temperature, humidity by experiment.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.11
• /
• pp.776-779
• /
• 2004

Resident mobile communication system technology has been developed. But, surged high voltages in antenna generally have damaged mobile communication. To solve this problem, we use an arrester in Rx-Tx line system. That is, the arrester is introduced to protect devices in system against considerable over-voltages or lighting strike. Currently, system protection using an arrester has arrived in a content level but these days, the PIMD(Passive Intermodulation Distortion) with RF passive components' nonlinear characteristic has appeared. This paper describes PIMD' causes occurred in arrester-estimated from Gas tube capsule. plating, temperature, and humidity by experiment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.732-739
• /
• 2005

In this paper, the design and implementation of the Ka-band(20/30 GHz) waveguide diplexer with an E-plane T-junction are described. The waveguide diplexer consists of a transmit filter and a receive filter combined to the antenna port via an E-plane T-junction. The reason why the E-plane T-junction structure was selected is to reduce PIM(Passive Intermodulation) level as the split-plane is located in the low electrical current zone. The optimization was performed using the equivalent circuit so that the computation time might reduce. The structure of the diplexer was designed to handle high power and the multipaction analysis was performed. The multipaction margin was greater than 12 dB and satisfied with ESA/ESTEC recommendation. The manufactured diplexer shows minimum return loss of 22 dB, maximum insertion loss of 0.20 dB and maximum isolation of -40 dB for both transmitted receive bands. Those mean the analysis results of the waveguide diplexer were well agreed with the electrical performance test.

• ETRI Journal
• /
• v.24 no.6
• /
• pp.435-442
• /
• 2002

Antenna Passive Intermodulation (PIM) level measurement results are rarely credited to be due to external signal receiving characteristics of the antennas or serious effects from external PIM sources, such as the anechoic chamber absorber and antenna tower. This paper presents an antenna PIM model for a reflected PIM measurement method. Based on the findings of null point generation and the behavior of the third order PIM values obtained by theoretical predictions and experimental results, we concluded that the results of the antenna PIM level test were influenced by the external PIM sources generated by the anechoic chamber absorber and the path differences of PIM signals coming into the antenna.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.11
• /
• pp.1477-1482
• /
• 2001

In this paper, we examined receiving parameters of receiver and also analyzed them through simulation based on J-STD-018, which is the minimum specification of PCS mobile station. Receiving system was made a passive double balance mixer which has low gain and high IIP3, and an intermediate frequency amplifier for enhancing the low gain. The result of simulating receiving parameter is as follows: noise figure which is the parameter of specification of the receiving sensitivity is 6.746dB, IIP3 which is the parameter of specification of the intermodulation spurious response attenuation is -11.358dBm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.9
• /
• pp.560-562
• /
• 2014

Broadband power divider operating over the frequency band assigned for all domestic mobile communications is designed and implemented. The implemented power divider with 20Watts power rating has the maximum insertion loss of 3.49dB, input reflection coefficient of below -18.48dB and output reflection coefficient of below -20.2dB, above 24.7dB isolation and -141.2dBc of 3rd PIMD over the operating frequency of 810 ~ 2620MHz.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.1-8
• /
• 1998

An MMIC single-balanced upconverting mixer for PCS application has been successfully developed using an MMIC process employed by 1 .mu. ion implanted GaAs MESFET and passive lumped elements consisting of spiral inductor, Si3N4 MIM capacitors and NiCr resistors. The configuration of the mixer presented in this paper is two balanced cascode FET mixers with common-source self-bias circuits for single power supply operation. The dimension of the fabricated circuit including two active baluns intermodulation characteristic with two-tone excitation are also measured, showing -28.17 dBc at IF power of -30 dBm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.692-698
• /
• 2003

This paper presents IM model which is produced in 3 port RF passive component. We calculated forward and reflect PIM of 3 port component by using the model. And they are reasonable agreement with measurement result like below. In the case of forward IM, calculated result is -122 dBc(at 43 dBm), which differ 2.5 dB with measurement result. And reflected IM, the average calculated result is -130 dBc(at 43 dBm), which differ 3 dB with measurement result. The results which are calculated and measured under various condition(IM source level, frequency sweep, contour length, etc.) show that forward method gets more fixed result than that of reflect. Consequently, PIM of 3 port component is predicted and analyzed for desensitizing by the proposed model.