• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.275-282
• /
• 2013

Applications such as vibration isolation, gravity compensation, pick-and-place machines, etc., would benefit from (long-stroke) cylindrical/tubular permanent magnet (PM) actuators with integrated passive gravity compensation to minimize the power consumption. As an example, in component placing (pick-and-place) machines on printed circuit boards, passive devices allow the powerless counteraction of translator including nozzles or tooling bits. In these applications, an increasing demand is arising for high-speed actuation with high precision and bandwidth capability mainly due to the placement head being at the foundation of the motion chain, hence, a large mass of this device will result in high force/power requirements for the driving mechanism (i.e. an H-bridge with three linear permanent magnet motors placed in an H-configuration). This paper investigates a tubular actuator topology combined with passive gravity compensation. These two functionalities are separately introduced, where the combination is verified using comprehensive three dimensional (3D) finite element analyses.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.481-488
• /
• 2000

This paper presents a new passive gravity -compensating system for articulated robot manipulators. The system, which consists of linear zero- free -length springs, achieves exact counterbalancing o f the gravitational loads throughout the entire range of the manipulator workspace, A basic concept is to design springs such that the total potential energy of the system including the manipulator and the springs should be maintained constant. A prototype has been developed for a direct-drive five-bar manipulator and its performances have been investigated. Results show that the gravity-induced motor torques have been reduced to less than 5% of those of uncompensated robots. Also, the gravity-compensating system simplifies the position control algorithm while maintaining the trajectory-tracking errors in a satisfactory level. In conclusion, the proposed system efficiently improves the manipulator performances by reducing the driving motor size and the energy consumption as well as by simplifying the control systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.103-108
• /
• 2012

In this paper, the optimal design of a spring-type gravity compensation system for an articulated robot is presented. Sequential quadratic programming (SQP) is adopted to resolve various nonlinear constraints in spring design such as stress, buckling, and fatigue constraints, and to reduce computation time. In addition, continuous relaxation method is used to explain the integer-valued design variables. The simulation results show that the gravity compensation system designed by proposed method improves the performance effectively without additional weight gain in the main workspace.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2017

Static balance of an articulated robot arm at various configurations requires a torque compensating for the gravitational torque of each joint due to the robot mass. Such compensation torque can be provided by a spring-based counterbalance mechanism. However, simple installation of a counterbalance mechanism at each pitch joint does not work because the gravitational torque at each joint is dependent on other joints. In this paper, a 6 DOF industrial robot arm based on the parallelogram for multi-DOF counterbalancing is proposed to cope with this problem. Two passive counterbalance mechanisms are applied to pitch joints, which reduces the required torque at each joint by compensating the gravitational torque. The performance of this mechanism is evaluated experimentally.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.105.2-105
• /
• 2002

$\textbullet$ Statically stable walk with COG(center of gravity) $\textbullet$ Dynamically stable walk with ZMP(zero moment point) $\textbullet$ Dynamically adaptational stable walk with FRI(foot ratation indicator) $\textbullet$ Simplified inverted pendulum model approach $\textbullet$ Analysis posture of biped's foot as passive joint $\textbullet$ Stability compensation method of FRI against falling down $\textbullet$ Simulation of ZMP and FRI to real biped robot IWR-III

• The Korean Journal of Physiology
• /
• v.7 no.1
• /
• pp.13-21
• /
• 1973

An attempt was made to study circulatory and respiratory responses to the passive tilt. Anesthetized dogs were tilted from horizontal to upright $(+90^{\circ})$ and head down $(-90^{\circ})$ position. The arterial blood pressure was decreased in the upright position and was decreased slightly in the head down position comparing to that in the horizontal position. Cardiac index also decreased in the both upright and head down positions. The total systemic vascular resistance was slightly increased in the upright position and was markedly increased in the head down position. The mean pulmonary arterial pressure was significantly decreased in the both upright and head down positions. The total pulmonary vascular resistance was decreased in the both upright and head down positions. Oxygen consumption was slightly decreased in the upright position, whereas it was slightly increased in the head down position. The A-V $O_2$ difference (vol. %) was slightly increased in the upright position and increased in the head down position. From the above results, process of the circulatory compensation to the gravity in the Passive tilting test was discussed. Neuronal cardiovascular regulation to the gravity and tile adaptation of capacitance vessles to hydrostatic stress and oxygen consumption concerning anoxic endurance of the brain were also discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.469-475
• /
• 2017

Workers in industrial fields are highly exposed to accidents or injuries caused by long working hours. An exoskeleton that is able to support the arm muscles of the worker and thereby reduce the probability of an accident and enhance working efficiency could be a solution to this problem. However, existing exoskeletons demand the use of high-priced sensors and motors, which makes them difficult to use in industrial fields. To solve this problem, we developed an arm assisting exoskeleton that consists only of mechanical components without any electronic sensors or motors. The exoskeleton follows the movement of the human arm by shoulder joint and ankle joint. In addition, counterbalance mechanisms are installed on the exoskeleton to support arm strength. The experimental validation of the exoskeleton was conducted using an EMG sensor, confirming the performance of the exoskeleton.