• 제목/요약/키워드: Passenger Flow

검색결과 214건 처리시간 0.025초

승용차의 제상 및 성에 제거 성능 평가를 위한 수치해석적 연구 (Numerical Study on the Performance Assessment for Defrost and De-Icing Modes)

  • 김윤기;양장식;김경천;지호성
    • 대한기계학회논문집B
    • /
    • 제35권2호
    • /
    • pp.161-168
    • /
    • 2011
  • HVAC(Heating, Ventilating, Air Conditioning) 시스템은 승객실 내부의 열환경을 제어하여 쾌적성을 향상시키거나 전면 유리창에 생성된 성에를 제거하여 운전자의 가시영역을 확보하는 등 차량의 성능과 관련된 매우 중요한 기능을 담당한다. 본 연구에서는 CFX 를 사용하여 HVAC 시스템의 기능 중 제상 덕트의 성능과 관련된 수치해석적 연구를 수행하였다. 제상덕트의 해석결과, 출구에서의 유량배분특성 및 유동구조는 일반적인 설계주안점에 부합된 양호한 결과를 얻었다. 외부온도 $-18^{\circ}C$ 하에서 물의 잠열인 $3.37{\times}10^5$[J/kg]을 고려한 상변화 과정을 수치적으로 모사하기 위하여 열용량법을 사용하였고, 시간에 따른 제상패턴 해석을 위해 얼음과 유리의 고체도메인에 대한 추가적인 격자 생성 작업이 필요하였다. 유동해석 결과, 전면유리 근처의 유동구조, 유적선, 온도장 해석결과는 본 연구에서 수행한 제상덕트 모델이 우수한 성능으로 제상기능을 수행할 수 있음을 보였으며, 수치해석적 결과는 실험적 결과와 비교하여 제상패턴이 잘 일치함을 확인하였다. 또한 전면유리 상의 4 개의 지점에서 얻어진 온도, 물분율, 엔탈피의 시간에 따른 변화를 통해 상변화 과정을 정량적으로 파악하였다.

자동차 선적작업장의 공기오염 실태조사 (Investigation into Air Pollution in Car Shipping Workshop in Pyeongtaek Port)

  • 김지호;원종욱;김치년;노재훈
    • 한국산업보건학회지
    • /
    • 제16권1호
    • /
    • pp.44-53
    • /
    • 2006
  • This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.

고속열차의 지하정거장 통과 시 발생하는 공기역학적 영향에 대한 전산유체해석 연구 (A STUDY ON THE AERODYNAMIC EFFECTS WHEN A HIGH-SPEED TRAIN PASSING THROUGH AN UNDERGROUND STATION USING COMPUTATIONAL FLUID DYNAMICS)

  • 임광만;김영매;방명석;권혁빈
    • 한국전산유체공학회지
    • /
    • 제21권4호
    • /
    • pp.61-70
    • /
    • 2016
  • Dong-tan Station, shared by high-speed railway and urban express railway, is a very complicated underground station having 6 tracks together with barrier and shafts between them, therefore it seems very hard to investigate the aerodynamic effects including the pressure variation and train gust in the station when a high-speed train runs through it. In this study, the aerodynamic effects on the structures and platform passengers when a high-speed train runs through an underground station have been studied using Computational Fluid Dynamics. STAR-CCM+ has been employed for numerical simulation based on Navier-Stokes equation and 2-equation turbulence model and moving mesh scheme supported by STAR-CCM+ has also been used to represent the relative motion between a train and station. Based on the simulation results, the unsteady flow fields in the underground station induced by the high-speed train have been analyzed and the pressures on the PSDs and pressure variation at the platform have quantitatively assessed.

폴리에틸렌 카누의 구조해석과 제조에 관한 연구 (Study on Structural Analysis and Manufacturing of Polyethylene Canoes)

  • 박찬균;김민건;조석수
    • 대한기계학회논문집A
    • /
    • 제35권3호
    • /
    • pp.309-316
    • /
    • 2011
  • 일반적으로 카누는 목재나 FRP 등으로 제작된다. 그러나 소비자들은 기존의 재료에 비하여 염가이면서 친환경 재료를 선호한다. 특히, 선진국에서는 일부 선박에 대하여 FRP 선체 제조를 금지하는 법안을 발표하고 이에 따른 국제협약을 제정하였다. 폴리에틸렌은 식료품 용기나 의료용 용기로 널리 사용되는 재료로서 리사이클 가능한 재료이다. 본 연구에서는 카누 선체 재료로 폴리에틸렌으로 선정하였으며 선형설계는 상용 선형 설계 프로그램인 3D Boat Design을 이용하여 수행하였다. 카누 구조하중은 우선 ANSYS CFX R12.1을 이용하여 선체에 작용되는 압력 분포를 구하고 이것을 ANSYS WORKBENCH R12.1로 넘겨 선체 압력 하중과 패들러 하중을 동시에 고려하였다. 카누 각 치수를 설계변수화하여 응력과 무게를 최소화하는 최적화 과정을 반응표면방법과 만족도 함수를 이용하여 수행하였다. 개발된 카누는 운항시험에서 직진성이나 안정성은 우수하나 운반성과 선회성 및 속도는 보통인 것으로 판단된다.

철도터널 내 화재 시 대피환경 확보를 위한 임계속도 산정식의 유효성 평가 (Effectiveness of critical velocity method for evacuation environment in a railroad tunnel at fire situation)

  • 이승철;이재헌;이승호
    • 한국터널지하공간학회 논문집
    • /
    • 제6권1호
    • /
    • pp.51-59
    • /
    • 2004
  • 본 연구에서는 3차원 전산유체역학 기법을 이용하여 열차터널 내 10MW급 화재발생 시, 대피환경에 대한 1차원 임계속도의 유효성을 평가하였다. 또한 터널의 입구속도가 1m/s, 2m/s (임계속도) 그리고 3m/s일 때의 터널 내 기류분포, 온도분포, 가시거리분포 및 오염물질분포가 대피환경에 미치는 영향을 각각 검토하였다. 그 결과, 세 가지 경우모두, 승객의 안전한 대피환경을 충분하게 제공하지 못할 것으로 예상되어 승객들은 유동방향 하류로 대피하여야 한다. 그러나 3m/s 입구속도의 경우는 1m/s, 2m/s의 경우 보다 승객의 대피환경에 있어서 좀 더 나은 결과를 보인다. 따라서 터널의 방재시스템의 설계 시, 안전한 대피환경을 확보하기 위해서는 임계속도보다 큰 입구속도의 시용이 요구된다.

  • PDF

EVALUATION OF DYNAMIC TENSILE CHARACTERISTICS OF POLYPROPYLENE WITH TEMPERATURE VARIATION

  • Kim, J.S.;Huh, H.;Lee, K.W.;Ha, D.Y.;Yeo, T.J.;Park, S.J.
    • International Journal of Automotive Technology
    • /
    • 제7권5호
    • /
    • pp.571-577
    • /
    • 2006
  • This paper deals with dynamic tensile characteristics for the polypropylene used in an IP(Instrument Panel). The polypropylene is adopted in the dash board of a car, especially PAB(Passenger Air Bag) module. Its dynamic tensile characteristics are important because the PAB module undergoes high speed deformation during the airbag expansion. Since the operating temperature of a car varies from $-40^{\circ}C$ to $90^{\circ}C$ according to the specification, the dynamic tensile tests are performed at a low temperature($-30^{\circ}C$), the room temperature($21^{\circ}C$) and a high temperature($85^{\circ}C$). The tensile tests are carried out at strain rates of six intervals ranged from 0.001/sec to 100/sec in order to obtain the strain rate sensitivity. The flow stress decreases at the high temperature while the strain rate sensitivity increases. Tensile tests of polymers are rather tricky since polymer does not elongate uniformly right after the onset of yielding unlike the conventional steel. A new method is suggested to obtain the stress-strain curve accurately. A true stress-strain curve was estimated from modification of the nominal stress-strain curves obtained from the experiment. The modification was carried out with the help of an optimization scheme accompanied with finite element analysis of the tensile test with a special specimen. The optimization method provided excellent true stress-strain curves by enforcing the load response coincident with the experimental result. The material properties obtained from this paper will be useful to simulate the airbag expansion at the normal and harsh operating conditions.

추진제 특성을 이용한 에어백 인플레이터 성능 제어에 대한 실험 및 해석에 대한 연구 (Automotive Airbag Inflator Analysis Using Measured Properties of Modern Propellants)

  • 서영덕;김건우;홍범석;김진호;정석호;여재익
    • 한국자동차공학회논문집
    • /
    • 제18권6호
    • /
    • pp.53-62
    • /
    • 2010
  • An airbag is composed of housing assembly, door assembly, cushion assembly, and an inflator. The inflator is the essential part that generates gas for airbag. When an airbag is activated, it effectively absorbs the crash energy of the passenger by inflating a cushion. In this study, tank tests were performed with newly synthesized propellants with various compositions, and the results are compared with the numerical results. In the simulation of inflator, a zonal model has been adopted which consisted of four zones of flow regions: combustion chamber, filter, gas plenum, and discharge tank. Each zone was described by the conservation equations with specified constitutive relations for gas. The pressure and temperature of each zone of the inflator were calculated and analyzed and the results were compared with the tank test data. In the zone of discharge tank the pressure quickly rose, the pattern of pressure curve was very similar to the pressure curve of real test. And in zone 1 & 2 & 3 the mass of products was increased and decreased with time. In zone 4, the mass of products was increased with time like real inflator. From the similarity of pressure curve in zone 4 and closed bomb calculation the modeled results are well correlated with the experimental values.

자동차 고속 주행시 와이퍼 부상현상에 대한 수치해석 연구 (Numerical Study on Aerodynamic Lift on Windshield Wiper of High-Speed Passenger Vehicles)

  • 이승호;이성원;허남건;최우녕;설진환
    • 대한기계학회논문집B
    • /
    • 제35권4호
    • /
    • pp.345-352
    • /
    • 2011
  • 고속으로 주행하는 자동차에서 전면유리 와이퍼의 부상 현상은 와이퍼의 닦임 성능을 저해하여 운전자의 안전을 위협한다. 본 연구에서는 고속 주행 시 와이퍼가 작동하는 차량 주변의 3차원 CFD 해석을 수행하여 와이퍼의 닦임 성능 향상을 위한 방안을 모색하였다. 정확한 해석결과를 얻기 위하여 차량과 와이퍼의 자세한 형상을 모델링하였고, 해석 결과로 와이퍼의 양력계수와 항력계수를 산출하였다. 또한, 수치해석을 통하여 와이퍼 작동 각도와 후드 끝단 각도가 전면유리 와이퍼의 양력계수와 항력계수에 미치는 영향에 대하여 분석하였다.

미분무수 소화시스템의 도로터널 적용을 위한 실물 화재 실험 (Full-scale Fire Suppression Test for Application of Water Mist System in Road Tunnel)

  • 한용식;최병일;김명배;이유환;소수현
    • 한국화재소방학회논문지
    • /
    • 제25권3호
    • /
    • pp.51-56
    • /
    • 2011
  • 도로터널에서의 미분무수 소화시스템의 화재진압 특성을 조사하기 위해 실물 터널 화재 실험을 수행하였다. 적용된 소화시스템은 압력이 3.5 bar인 저압 물분무 소화설비와 60 bar인 고압 미분무수 소화시스템이다. 미분무수 소화시스템은 물분무 소화시스템의 1/6 만큼의 소화용수량을 사용한다. 화원 (fire source)은 실물 승용차와 유류화재를 모사한 화원면적 $1.4m^2$의 헵탄 연료 팬 화재로 구성하였다. 터널 내의 환기조건을 구현하기 위해 실물모형 터널의 한쪽 끝단에 유속(0.9~3.8 m/sec 범위) 발생장치를 설치하였으며, 화원에서 하류 방향으로 터널 내 온도분포는 K-type 열전대 트리를 사용하여 측정하였다. 실험 결과 고압 미분무수 소화시스템은 B급 화재의 경우 저압 물분무 시스템과 동등한 수준의 냉각효과를 보였다.

자동차용 프리텐셔너의 성능향상을 위한 실험적 연구 (Experimental Study to Improve the Performance of the Pretensioner for a Passenger Vehicle)

  • 정성필;박태원;송택림
    • 한국자동차공학회논문집
    • /
    • 제18권2호
    • /
    • pp.1-6
    • /
    • 2010
  • This study presents the practical design modification to improve the retracting performance of the pyro-typed high power pretensioner. 3 components of the pretensioner are redesigned and the usefulness of the design modification is verified by the experiment. During the pretensioning process, the gas blast generated from the gunpowder is transferred to the rack-pinion gear through the manifold. The rack-pinion gear is connected with the spool where the webbing is rolled up. According to the rotation of the pinion, the spool is turned and the webbing is winded. To help the gas blast flow well, the shape of the inner cross section of the manifold is changed. The spur gear design program is developed and used to find the best combination of the rack-pinion gear pair to increase the power transmission efficiency. The pinion guide is installed on the spool to prevent the vibration of the pinion. As a result of the experiment, the amount of the web retraction length is increased when every single design modification is applied. Therefore, the retracting performance of the pretensioner is considered to be improved if the presented design modifications are applied.