• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.148-152
• /
• 2013

An ultraviolet (UV) sterilization system was developed to decrease the number of microorganisms in filtered Acer mono sap (FAS). The Acer mono sap (AS) was passed through 18 strips of PTA fluoroplastic tubing with 30 UV lamps (total 1,170 W). During passage, the AS was effectively exposed to the UV rays. The total bacteria, coliform group and fungi were sterilized at a flow rate ranging from 852 to 1,358 mL/min and a UV power higher than 156 W. Although the sensory score of the UV-sterilized AS was significantly lower than that of the untreated AS, the sensory score was better under the condition of 390 W and 852~1,358 mL/min than under the other conditions examined. ANOVA did not reveal a significant difference in pH, total acidity, sugar content and color characteristic under all conditions tested (p<0.05). Considering the overall attributes of the AS quality, the optimum sterilization condition was determined to be 390 W and 852~1,358 mL/min.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.1 s.120
• /
• pp.1-8
• /
• 2007

The purpose of this study is to suggest the minimum distance needed between landscape trees and apartment buildings. in order for the trees to grow soundly and maintain constant growth. Therefore, this study investigated and analyzed the present conditions of the green-spaces contiguous to apartment buildings and the trees inside the apartment complex. The following general problems were identified : (1) the tree growth conditions, (2) the planting intervals, and (3) the planting methods in the apartment complexes. The method of this study was to survey areas, measure the trees and analyze the results. Ten apartment complexes located in Seoul were randomly selected for this study. To analyze the greens contiguous to the building of each apartment complex, the greens were divided into three types, including the front greens, the side greens, and the rear greens. The study surveyed the width of all contiguous greens and the distance from trees to my given building. Four representative sites were specifically investigated to measure the crown widths, heights, and diameters of the trees. These investigations were carried out over 3 months from August to December 2006. According to the results of the study, it was found that the greens are narrower in width and the more closer to a building. The study identified a correlation between the tree and the passage of time after the completion of construction of an apartment complex, showing that the malformation of the trees worsened as time passed. As a result of measuring the right crown and left crown width with the tree trunk as the center, a broad difference was found between coniform trees and trees that tend to branch out more. For example, the ratio of the width of the Acer palmatum is 1:6. However, the ratio of the Metasequoia glyptostroboide is 1:1.7. Based on the overall analysis, it was concluded that the maintained minimum width must be greater than one meter over the green space according to the 'Landscape Standard 2000'. However, that is only applicable to cases such as apartment buildings that present no obstacles. In conclusion having greens placed within one meter of width to a building is not an appropriate environment for the healthy growth of trees. To create sound green spaces, sustainable, long-term growth rate and size should be considered. It is necessary to prepare new standards for the computation of planting trees and the measurement of square landscapes. Wall greenery and shrubberies could be an alternative in the case of a narrow-width green space.

• Clinical and Experimental Pediatrics
• /
• v.49 no.5
• /
• pp.494-499
• /
• 2006

Purpose : Acinetobacter baumannii is increasingly recognized as an important cause of nosocomial infection, especially in neonatal intensive care units. But little is known about the clinical significance and hospital epidemiology of Acinetobacter species other than A. baumannii. The objective of this study is to describe the clinical characteristics and epidemiology of septicemia due to Acinetobacter species other than A. baumannii. Methods : We retrospectively reviewed 11 cases of blood culture proven nosocomial infection which occured in our neonatal intensive care unit from $4^{th}$ to $24^{th}$, February, 2004. To establish epidemiological analysis, we performed environmental cultures and an antibiogram was obtained from susceptability tests of isolated Acinetobacter species. Results : Clinical manifestations including fever, poor feeding, abdominal distension, diarrhea, bloody stool passage, vomiting, tachypnea and apnea were similar to other infectious diseases. Benign clinical courses were compared with poor prognose, including a high mortality rate in septicemia due to A. baumannii. The major predisposing factor among our patients was the presence of a peripheral intravascular catheter. Antibiogram was similar, but surveillance cultures of environmental specimens failed to identify the source of infection. Conclusion : Acinetobacter species other than A. baumannii were often considered relatively avirulent bacteria, but could be pathologic organisms if cultured in patients with clinical symptoms.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.4
• /
• pp.407-410
• /
• 1992

Changes in the concentrations of six low-molecular-weight organic acids extracted from hydrolysates of plant residues undergoing decomposition for 90 days under the laboratory condition were investigated. 1. Litters of deciduous and coniferous trees and wild grass cuttings were sampled for the study and concentrations of formic, acetic, succinic, tartaric, malic and citric acids were determined. The concentration of malic acid were negligible. 2. In the wild grass cuttings, the total concentration of low-molecular-weight organic acids decreased with the passage of decomposition. Monocarboxylic acids, I. e., formic and acetic acids, predominated over dicarboxylic and tricarboxylic acids. Formic and acetic acids appeared to be compensatory for each other. Concentration of citric acid increased at a remarkable rate. 3. The total concentration of organic acids in the hydrolysates of deciduous litter was shown to increase. The concentration of monocarboxylic acids was significantly higher in the end of the period of decomposition. Here again a compensatory relationship was observed between concentrations of formic and acetic acids. 4. There was comparatively little change exhibited during the period of experiment concerning the concentrations of organic acids from hydrolysates of decomposing coniferous litter. In contrast with the others, however, the concentration of succinic acid, a dicarboxylic acid, maintained the highest level.

• Reproductive and Developmental Biology
• /
• v.28 no.3
• /
• pp.141-145
• /
• 2004

Mucin coat is deposited on the embryos during passage through the oviduct in rabbit. When in vitro cultured blastocysts were transferred to the recipients, the lack of mucin coat might account in part for failure of pregnancy after transfer. The present study were carried out to investigate whether deposition of mucin coat were induced when in vitro cultured blastocysts were transferred to recipients. At 19 ～20 hours post-coitus one-cell embryos were collected by flushing oviducts. These embryos cultured for 72 hours were reached to blastocyst stage. And these blastocysts were transferred to the oviduct of asynchronized (one day later than the donors) and synchronized recipient. To confirm deposition of the mucin coat, blastocysts transferred to the oviduct were recovered at 24 and 48 hours after the transfer. Fifty eight percent of blastocysts recovered from uterus of asynchronous recipient at 24 hours after transfer and 92.9% of blastocysts recovered from uterus of synchronous recipient were 0～10 ㎛ of mucin coat thickness. And 11.8% of blastocysts of asynchronized recipients and 7.1% of blastocysts from asynchronized recipients were in 11～20 ㎛ of mucin coat thickness. When blastocysts were recovered from uterus at 48 hours after transfer, 87.0% of blastocysts from asynchronized recipients and 5.9% of blastocyst from synchronized recipients were in 0～10 ㎛ of mucin coat thickness. And 76.5% of blastocysts of synchronized recipients and 4.4% of blastocysts from asynchronized recipients were in 11～20 ㎛ of mucin coat thickness. From these results it is speculated that the low implantation rate of in vitro cultured rabbit blastocysts transferred to oviduct of recipient was caused by high degeneration of the embryo after transfer and inappropriate deposition of mucin coat.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.22-22
• /
• 2001

To produce reconstituted rabbit embryos with fetal fibroblasts, the present study was evaluated the efficiencies of the different fusion and activation conditions as assessments of subsequent development and chromosome in the embryos. New Zealand White rabbits were used throughout the study. Fetal fibroblasts collected from 22-d of fetuses were cultured in DMEM ＋ 10% FBS in 5% $CO_2$ in air. The culture was maintained for 10 passages. In every passage half of cell suspension were kept In frozen. From rabbits treated with FSH in 30% PVP solution and hCG, oocytes were surgically collected from oviducts at 14 h post-hCG injection and stripped off their cumulus cells by re-pipetting in a 300 IU hyaluronidase solution. Oocytes with an extruded first polar body and dense cytoplasm were enucleated by micromanipulation in Ham's F-10 medium＋7.5 g/$m\ell$ cytochalasin B. Euncleation was confirmed under a fluorescence microscope after staining with 5 g/$m\ell$ bisbenzimide for 2 min. Each enucleated oocyte was injected with a fetal fibroblast into a perivitelline space. Reconstructed eggs were compared fusion rates either at 2.0 ㎸/cm or 1.6 ㎸/cm(60 sec, double pulses). After fusion, all eggs were activated with the combination of 5 M ionomycin (5 min) and 10 g/$m\ell$ cycloheximide (CHX, 3h), and cultured in CRlaa medium and transferred into TCM199＋10% FBS on day 3. Although there was not significantly differ in fusion rate between treatments (60%, 2.0 ㎸/cm vs. 79.4%, 1.6 ㎸/cm), none of them in the eggs fused with 2.0 ㎸/cm developed to blastocyst. In comparison of development and chromosome status between different activation treatments (Group 1; 5 M ionomycin/10 g/$m\ell$ CHX, Group 2; 5 M ionomycin/5 g/$m\ell$ CHX ＋ 2 mM DMAP after fusion with 1.6 ㎸/cm), there were not differ in cleavage and development rates (67.3% and 28.9% in Group 1; 67% and 33% in Group 2). All out of 8 embryos evaluated in Group 1 appeared a normal diploid chromosome sets and mean number of cells (Mean SEM) on day 4.5 of culture was 141.5 23.15 (n=8). It can be concluded that the use of cycloheximide has not happened in chromosome abnormalities, and fetal fibroblasts can be used for cloning in rabbit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.107-114
• /
• 2017

A turbocharger is an engine supercharger that is driven by exhaust gas. It improves the output and fuel efficiency by increasing the charging efficiency of the mixture gas, which is achieved by changing the rotatory power of the turbine connected to the exhaust passage. It is important to control the supercharging for this purpose. A nozzle slide joint is one of the core parts. Austenitic stainless steel is currently used as the material for this part, and its excellent mechanical properties include high heat resistance and corrosion resistance. However, because of its poor machinability, there are many difficulties in producing products with complicated shapes. Machining is used in the production of nozzle slide joints for high dimensional accuracy after metal powder injection molding. As design variables in this study, we investigated the sintering temperature, product stress, deformation rate, radius of curvature of the punch, and angle of the chamfer punch, which are related to the strain and shapes. The goal is to suggest a forming process using Nitronic 60 that does not require machining to manufacture a nozzle slide joint for a turbocharger. Accordingly, we determined the best process environment using finite-element analysis, the signal-noise ratio, and the Taguchi method for experiment design. The relative density and hydrostatic pressure of the final product were in accordance with the results of the finite element analysis. Therefore, we conclude that the Taguchi method can be applied to the design process of metal powder injection molding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2779-2788
• /
• 2012

The housing market is now difficult because of excess of the increase rate of housing and long-term recession but high-rise mixed-use buildings can mix residential facilities with various demand facilities focusing and they have the advantages to secure open space and excellent view by high-rise apartment. But there are problems by hindrance of skyline formation and height of buildings. Therefore, the purpose of this study is to suggest the height standard and the slenderness ratio to location types of Mixed-use Residential Tall buildings. For the method of the study, term arrangement through literature search and the precedent research survey were first done, the level of urban design and the details related to the height of buildings were done as the case research focusing on the 16 cases in Seoul. The following results were drawn by suggesting the height standard and the slenderness ratio by location type based on them. First, the height of mixed-use building by location type in the level of urban design gets higher starting from the secondary center of the city and can be suggested as from less than 150m to more than 200m. Second, the slenderness ratio shall be planned as more than 1:3 because the area of the ground level of mixed-use building is large unlike Mixed-use Residential Tall buildings and visual passage shall be placed so that unity of openness and group formation will be planned. Third, for the height related to Mixed-use Residential Tall buildings, amendment of the special architectural district system and the special law related to super high-rise buildings shall be enacted.

• Journal of Veterinary Clinics
• /
• v.18 no.2
• /
• pp.124-132
• /
• 2001

The purpose of this study is to know whether single layer continuous connell suture is an acceptable alternative to simple interrupted approximating suture for end-to-end intestinal anastomosis in dogs. Fourteen mixed-breed dogs weighing 2 to 5 kg were allotted to group treated with simple interrupted approximating suture (Group I) and group treated with single layer continuous Connell suture (Group II), each of 7 dogs. All dogs in each suture pattern were compared with time for total operation ad suture elapsed for intestines to anastomose, clinical signs, changing of pre-and postoperative luminal size, status of feces, adhesion at anastomotic site for 14 days after operation. Time for total operation and suture time for intestinal anastomosis were none significant between Group I and Group II, although those in Group II was about 3 minutes shorter than those in Group I, respectively. Group I spent average 47.08${\pm}$11.10 minutes on total operation, 20.97${\pm}$5.54 minutes on suture time for intestinal anastomosis and Group II spent average 44.74${\pm}$7.77 minutes, 17.73${\pm}$3.05 minutes, respectively. All dogs were no special differences in vitality, vomiting, appetite between Group I and Group II for 14 days after operation. All dogs, except one dog in Group I, had showed normal vitality and appetite since 6~8 days after operation. Initial return of fecal passage showed in all dogs before 6 days after operation and thereafter most dogs showed normal feces. According to results, it was thought that all dogs with normal vitality and appetite before 8 days had showed good prognosis. There were no changes of intestinal luminal size in 2 dogs performed Group In and one dog performed Group II between at operation and 14 days after operation. Narrowing rate of intestinal lumen in Group I was average 9.3% of the normal diameter, whereas in Group II, 9.5% of normal diameter. In complications after operation, only one dog in Group I showed intestinal intussusception but the others didn't. Length of adhesion was measured between intestinal anastomotic site and omental graft. Length of adhesion in dogs performed Group II was mostly shorter than that of Group I. Adhesion with proximate intestines occurred in five dogs, which consisted of 3 dogs performed Group I and 2 dogs performed Group II. Concurrently, they had a great length of adhesion between anastomotic site and omental graft. There were no great differences between Group I and Group II about speed of operation, clinical signs, complications such as leakage and stricture. And all dogs performed intestinal anastomosis showed good clinical condition and prognosis. In conclusion, Single layer continuous Connell suture can safely perform an intestinal anastomosis and be an alternative of simple interrupted approximating suture in aspect of speed clinically.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.70-77
• /
• 2010

This study is to investigate experimentally the influence of mixing factors, such as a mortar mix proportion of non-cement mortar, flow, and W/B, on quality characteristics of blast furnace slag powder mortar incorporating dry type recycled fine aggregates. In the characteristics of fresh mortar, the W/B increased according to the increase in the flow due to the increase in water contents, but air contents decreased due to loss of air contrary to the increase in the W/B. In the case of hardened mortar, the compressive strength showed a decrease due to the highly determined W/B inversely according to the increase in the flow through the entire age in which the compressive strength increased proportionally according to the increase in the B/W. Also, the increasing rate of such compressive strength increased more largely due to the latent hydraulic property of the BS according to the passage of the age. The flexural strength at the age of 28 days according to the increase in the B/W represented a similar level in strength values without any increases. The flexural strength for the compressive strength was distributed as a range of 1/2 ~ 1/3 and that showed a higher range than that of conventional concretes.