• Phonetics and Speech Sciences
• /
• v.7 no.1
• /
• pp.27-37
• /
• 2015

This study was mainly aimed at investigating on the effects of background noises (i.e., white noise, multi-speaker conversational babble) on stuttering rate and other speech-related measures (i.e., articulation rate, speech effort). Nine Korean-speaking adults who stutter participated in the study. Each of the participants was asked to read a series of passages under each of four experimental conditions (i.e., typical solo reading (TR), choral reading (CR), reading under white noise presented (WR), reading with multi-speaker conversational babble presented (BR). Stuttering rate was computed based on a percentage of syllables stuttered (%SS) and articulation rate was also assessed as another speech-related measure under each of the experimental conditions. To examine the amount of physical effort needed to read, the speech effort was measured by using the 9-point Speech Effort Self Rating Scale originally employed by Ingham et al. (2006). Study results showed that there were no significant differences among each of the passage reading conditions in terms of stuttering rate, articulation rate, and speech effort. In conclusion, it can be argued that the two different types of background noises (i.e., white noise and multi-speaker conversational babble) are not different in the extent to which each of them enhances fluency of adults who stutter. Self ratings of speech effort may be also useful in measuring speech-related variables associated with vocal changes induced under each of the fluency enhancing conditions.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.145-151
• /
• 2008

A novel method was suggested for the estimation of design population and design wastewater flow rate in fishing and agrarian village. Even though the population was decreasing continuously in this area, the design population was considered as constant with the passage of the time in conventional methods. And although the portion of groundwater uses was pretty high, the design wastewater flow rate was determined by the supply amount of tap water. Consequently, the design population and the design wastewater flow rate were overestimated. To prevent these overestimates, the design population was predicted to decrease gradually using the population trends from Korea National Statistical Office, and the design wastewater flow rate was determined using the way that the supply amount of tap water was applied in developed areas and the supply amount of groundwater was used in undeveloped areas.

• Journal of Climate Change Research
• /
• v.4 no.2
• /
• pp.127-140
• /
• 2013

The present work analyzes the source and level of discount rate/benchmark for investment analysis on almost 4 thousand registered CDM, one of the Kyoto mechanisms, projects. As a result of analysis, the source and level of discount rate is changed as the passage of time and there are some countries that prefer certain sources and level. By project types, there is no difference among the sources but the level is not same. As the level of capital market development higher, there is a trend on changes in applying the source of discount rate, but the level is not different among groups. Finally there are no specific preferences on the sources on applying discount rate by DOE. And On analyzing, whether including China CDM projects or not influence the analysis results because China have registered a large number of projects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.12
• /
• pp.801-807
• /
• 2016

This paper aims to compare and study the cooling performance of a battery system in accordance with the inlet and outlet geometry of the air passage in an EV. The arrangement and the heat source of the battery module were fixed, and the inlet/outlet area and its geometry were varied with the analysis of the cooling performance. The results of this study provide suggestions for the air flow stream line inside of a battery, the velocity field, and the temperature distributions. It was confirmed that the volume flow rate of air should be over $400m^3/h$, in order to satisfy conditions under $50^{\circ}C$, which is the limit condition for stable operation. It was also revealed that the diffuser outlet geometry can improve the cooling performance of battery system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2001

To protect combustion chamber from high temperature combustion gas, regenerative cooling is used for most liquid rocket engine. Although regenerative cooling is the most effective way to protect the chamber from high heat flux, realization of this system requires detail analysis, manufacturing technique and high cost. To demonstrate the possibility of applying regenerative cooling to a real rocket engine, the hot fire test has been carried out for the sub-scale liquid rocket with the water cooling system. The main purpose of the test is to identify the problem area of design, safety and cost effective manufacturing technique. The coolant passage was 3 mm in width and wall thickness was 1 mm with stainless steel. Maximum combustion time and pressure were 60 seconds and 400 psi, respectively. The flow rate of coolant was reduced gradually from 2 kg/s to 0.12 kg/s throughout firing test, combustion chamber was visually examined and no dwfect was observed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.130-134
• /
• 2006

The injection uniformity of the fuel manifold in a liquid rocket engine has been analyzed with dividing plates to improve the cooling performance at the face plate. Three dimensional computational fluid dynamics analysis has been performed to compare the injection uniformity for 5 candidate designs and has been verified to compare with the measured data for the optimal manifold design. For the case I and II, the coolant mass flux increases as the whole working fluid is enforced to flow under the dividing plate. The injection uniformity decreases due to the variation of mass flux at the end of dividing plate and the concentration of mass flow rate at the center of manifold. However case III and IV have uniform injection performance due to reduced mass flux concentration as the coolant can flow along both upper passage and lower passage of the dividing plate. Among the candidate designs, case IV is thought to be the optimal dividing plate with regard to cooling performance and injection uniformity.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.7
• /
• pp.1-10
• /
• 1999

In this study, a numerical analysis is made on the ice-formation for laminar water flow inside a stenotic tube. The study takes into account the interaction between the laminar flow and the stenotic port in the circular tube. The purpose of the present numerical investigation is to assess the effect of a stenotic shape on the instantaneous shape of the flow passage during freezing upstream/downstream of the stenotic channel. In the solution strategy, the present study is substantially distinguished from the existing works in that the complete set of governing equations in both the solid and liquid regions are resolved. In a channel flow between parallel plates, the agreement between the of predictions and the available experimental data is very good. Numerical analyses are performed for parametric variations of the position and heights of stenotic shape and flow rate. The results show that the stenotic shape has the great effect on the thickness of the solidification layer inside the tube. As the height of a stenosis grows and the length of a stenosis decreases, the ice layer thickness near the stenotic port is thinner, due to backward flow caused by the sudden expansion of a water tunnel. It is found that the flow passage has a slight uniform taper up to the stenotic channel, at which a sudden expansion is observed. It is also shown that the ice layer becomes more fat in accordance with its Reynolds number.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.243-246
• /
• 2009

Housing distribution rate in our country has been continuously increased with economic growth, but residential plans satisfying the demands of residents are still not perfect yet. The demands of residents can be predicted by analyzing the housing viewpoint of residents. And also, the housing viewpoint can change according to various environmental changes, so it's important for us to understand the trend of change. Therefore, the housing viewpoints of university students who will be subjective residents of houses in future were analyzed by observing change due to trend of time. Target for this study is female university students in 20s. A portion of previously presented material (Korean Home Economics Association 37,1, 67-78) was used as data for 1998 and a questionnaire with 171 female university students was conducted on December 2008 for data for 2008. The following result was drawn from examination of change in the housing viewpoint due to trend of time by comparing the housing viewpoint of university students between 1998 and 2008. First, importance of was decreased and importance of was increased in functions of residence. Second, Most students thought and regardless of the time passage as their opinions on housing. And also, most students considered a living room as the most important space inside of a house regardless of the time passage and the ratio of considering a living room as the most important space was more increased.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.64-75
• /
• 2008

During an experimental investigation on a 3-bladed and a 4-bladed axial inducer, a severe surge instability was observed in a range of cavitation number where the blade passage is choked and the inducer head is decreased from noncavitating value. The surge was stronger for the 4-bladed inducer as compared with a 3-bladed inducer with the same inlet and outlet blade angles. For the 4-bladed inducer, the head decreases suddenly as the cavitation number is decreased. The surge was observed after the sudden drop of head. This head drop was found to be associated with a rapid extension of tip cavity into the blade passage. The cause of surge is attributed to the decrease of the negative slope of the head-flow rate performance curve due to choke. Assuming that the difference between the 3 and 4-bladed inducers is caused by the difference of the blockage effects of the blade, a test was carried out by thickening the blades of the 3-bladed inducer. However, opposite to the expectations, the head drop became smoother and the instability disappeared on the thickened blade inducer. Examination of the pressure distribution on both inducers could not explain the difference. It was pointed out that two-dimensional cavitating flow analyses predict smaller breakdown cavitation number at higher flow rates, if the incidence angle is smaller than half of the blade angle. This causes the positive slope of the performance curve and suggests that the choked surge as observed in the present study might occur in more general cases.

• The Korean Journal of Emergency Medical Services
• /
• v.9 no.2
• /
• pp.89-100
• /
• 2005

Due to the improvement in life, we, human beings, are living in the more convenient world. However, as society gets complex, it comes to be faced a dangerous situation that needs to request a help due to an unexpected accident. The promptly emergency relief and emergency treatment from this accident, can be said to be extremely important in increasing a rate of resuscitation. This study analyzed on a case study and problems about the Emergency Medical System out of hospital in our country. The contents in the results of a study can be summarized as follows. 1. given the occurrence of medical disputes in a situation of emergency treatment, the regulation in the legal protection 'Will need to be reinforced. 2. in relation to the mobilization of ambulance, the preferentially passage right in ambulance needs to be guaranteed. In general, the preferentially passage right in ambulance is secured, but it will need to be supplemented by improving the education in civic consciousness and the social system. 3. in case of emergency duties in the emergency medical technician, the countermeasure will need to be strengthened in terms of abusive language and violence from a citizen. 4. in terms of emergency duties in the emergency medical technician, aiming to keep safety from a sudden situation, the possession of the protective equipments will need to be completely provided. 5. the limitation of activity will need to be eased by expanding the range of duties in the emergency medical technician within the ambulance, and the opening of duties will need not to be allowed to the similarly job category. 6. it needs to be reinforced the safety of the emergency medical technician from infectious diseases. Aiming at these emergency medical technicians whose service spirit is thoroughgoing, the nation and the local government will need to form all the conditions in which emergency medical technicians can be active passionately.