• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.180-189
• /
• 2010

Since collective houses are started to be supplied, the housing market has been transformed from supplier to demander oriented, and various type with same area of unit households have been deigned and started to be distributed. It can be expected that such transfer phenomenon would be continuously sped-up, and unit household will be more subdivided and varied. Thus, we analysed and studied the planes with subject of unit households in national housing scale ($85m^2$) that is treated as supply standard and has biggest volume in construction by Korean housing corporation. The analysing method is investigating the area of each room within unit household, calculating their minimum, maximum, and average values, studying the efficiency of unit household plane according to the structure of each room by comparative analysis these values, and analysing changing matter by investigating any change of each room area. The analysing results of which are followings. At first, number of BAY on face is increasing. Second, allocation of each room has been vary. Third, area ratio among bedroom1, livingroom, diningroom/kitchen become similar. Fourth, the area of diningroom/kitchen become somewhat bigger. Fifth, the space for passage way is efficiently allocated. Sixth, service area is reduced, Seventh, stereotyped phenomenon Is appeared. Based on many studies so far, any improvements of unit householder in national housing scale are followings. First, in terms of forming style, unit householder in national housing scale is unfolded in various way though, the form of each room is not more than typical style. Second, it shows stereotyped phenomenon. Especially, bathroom 1, 2 show stereotyped feature in terms of their type and area across entire research years, also LDK allocation method is stereotyped, as well as stereotyped trend in bedroom 2, 3, allocation for 4 BAY type.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.311-318
• /
• 2018

In accordance with the stipulations of the STCW Convention, simulation training has been enforced in order to develop practical skills so as to prevent accidents by predetermining the risks in special marine environments. Simulation training is a useful way to acquire navigation abilities, and can continuously measure the ability of a trainee by applying an appropriate evaluation. However, the result of training is evaluated by the instructor's subjective judgment without quantitative criteria. Therefore, this study aims to quantitatively evaluate the effectiveness of simulation training. For this purpose, evaluation items were derived by analyzing legal standards, earlier studies, and the current status of MET institutions. The simulations were then performed three times in the same scenarios and analyzed the results. As a result, it has been shown that the objectively analyzed ability to keep the route and to make safe passage with other vessel, as well as subjectively evaluated ability by the apprentice officer has been improved as training progressed. Through the evaluation of simulation training results, it can be derived that simulation education needs supplementation, and can be provided as a basic form of data to quantify the evaluation results of the simulation training in the future.

• Journal of Welding and Joining
• /
• v.14 no.1
• /
• pp.57-67
• /
• 1996

With an expansion in automation of welding processes, emphasis has been shifted from other welding processes to the GMA welding. However, there is a problem with this process that the spatter occurs very frequently. In GMA welding, there are several types in the way of metal transfer from the electrode wire to the weld pool, which have a close relatonship with the spatter genetration. This study was concerned with the spatter occurring in the short-circuiting transfer. In welding with short-circuiting, the electromagnetic force formed by the welding current facilitatics the rupture of the metal bridge between the wire and workpiece and ensures the normal process of the welding process. However, the spatter can be genetrated from the droplet because of the upward magnetic force, when the droplet contacts with the weld pool. The passage of current through the bridge results in the accumulation of the thermal energy, which causes the bridge to explode in the final stage of short-circuiting, thus forming the spatter. Based on the above phenomena in conjunction with other experimental results published, the physical phenomenon related with the occurrence of spatter was modeled and the current waveform was investigated to reduce the spatter. Finally, the fuzzy rule based method was proposed to predict the time of short-circuiting and arcing in the metal transfer.

• Journal of Power System Engineering
• /
• v.21 no.6
• /
• pp.56-61
• /
• 2017

The check valves are mechanical valves that permit fluids to flow in only one direction, preventing flow from reversing. It is classified as one way directional valves. There are various types of check valves that used in a marine application. A lift type check valve uses the disc to open and close the passage of fluid. The disc lift up from seat as pressure below the disc increases, while drop in pressure on the inlet side or a build up of pressure on the outlet side causes the valve to close. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. On the other hand, optimization is a process of finding the best set of parameters to reach a goal while not violating certain constraints. The AMESim software provides NLPQL(Nonlinear Programming by Quadratic Lagrangian) and genetic algorithm(GA) for optimization. NLPQL is the implementation of a SQP(sequential quadratic programming) algorithm. SQP is a standard method, based on the use of a gradient of objective functions and constraints to solve a non-linear optimization problem. A characteristic of the NLPQL is that it stops as soon as it finds a local minimum. Thus, the simulation results may be highly dependent on the starting point which user give to the algorithm. In this paper, we carried out optimization design of the check valve with NLPQL algorithm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.80-86
• /
• 2017

This paper describes switching method of the cross-sectional area of the fluid passage way to improve the performance of a hydraulic engine mount with an inertia track and a decoupler. The mount has nonlinear dynamic characteristics depending on the vibrational frequency and amplitude. For the convenience of analysis, two linear motion equations were derived on the basis of the mechanical model according to the low-and high-frequencies. The properties of the transmissibility and dynamic stiffness derived from the equations were investigated according to switching the cross-sectional area of the inertia track and decoupler. Switching method of the cross-sectional area can be derived from the transmissibility plot. In comparison between transmissibility of passive and switchable mounts with an inertia track and a decoupler, the performance of the switchable mount is improved greatly than the passive mount. The resonant peak is remarkably reduced in the high frequency region.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.697-703
• /
• 2008

Excessive water leakage phenomenon happens through damage of nation core zone of about 17,000 storage of water facilities or collapse of dam is worried, is being damaged or enforce dilapidated fill dam core zone's repair reinforcement. Example that use grouting method of construction considering construction and economic performance etc. recently by repair reinforcement way about defect of dam is increased. Permeation grouting method repair & reinforcement of fill dam countermeasure is preferred in nation. Do that is economical to decide these repair reinforcement effect and grouting effect estimation method that do not give damage to dam is effective. Therefore, observing electricity resistivity Survey change of dam since grouting reinforcement using Electric resistivity Survey inquiry of seismic survey method in this research, Wished to verify grouting effect whether is possible as Electric resistivity Survey, and study whether integrity of dam through repair reinforcement defined.

• Journal of the Korean housing association
• /
• v.14 no.5
• /
• pp.19-26
• /
• 2003

The purpose of this paper is to examine and analyse the features of plan type and space composition of the Siheyuan(courtyard house) which is one of the most remarkable types of the traditional dwellings in China. With the passage of time this house developed into one of the chinese house style. The technique of Siheyuan's spatial composition goes so far back in the New Stone Age. The relics of this are the colony layout, the system of four sides, the layout type of a palace, the picture of lacquered ware, the pictured brick, the earthenware of house type, the cave painting, the paintings of painters and others. The fundamental spatial conception of it arranges one or more courtyards to compose, sometimes in a very complex way, a general walled compound. The main longitudinal axis is mainly north-south, but the chief buildings, or halls are always placed transversely to it. These rectangular buildings mayor may not connect, by means of open galleries variously planned, with rows of smaller buildings flanking the courtyards on both sides. On this system, enlargement is never carried out by adding to height, but by continual duplication of existing units, and growth in breadth or preferably depth. The need for family security is thought to have led to the development of this rectangular houses with walls mainly blank on the outside, defensible entrances, and public service facilities in the center of the houses.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2353-2356
• /
• 2002

The increase of vehicles stagnations leads to the increasing attention to the way customers pay and a large number of projects on electronic cash system. Tranport system is comprised of a number of advanced technologies, including information processing, communications, control, and electronics. Recently many research on a system which provides contact in order to protect driver's vehicle passage have been carried out. And some potential problems from that system are being reviewed by electronic cash system. In this papers, we suggest RF protocol developing technology using the concept of electronic cash. ATM electronic cash developing is consist of component of pre-developed coin throw, integration of component using its, and production of more requirement-satisfactory ITS solution. Result increase 15$\sim$40% pre-type vehicles stagnations. Especially, we expect this proposed concept would be well adapted to our national environments.

• Industrial Engineering and Management Systems
• /
• v.15 no.4
• /
• pp.290-297
• /
• 2016

The successful transfer of technology, needs to recognize the industrial purposes, resources, technology, innovation and the mode of transmission, methods of transmission, influential factors, it's how to recruit and how to develop, and each of these cognitive relies on special expertise. One of the important technologies is automotive technology, and s technology is important for the transition and its development in recent years. Hence, in this paper, after studying Iran and the world's automotive and emerging technologies situation, the status of commercial vehicles and s technology model are studied based on external models, technical specifications, and cost. In this way, we examine the incidence and the applicability of the technology used in the production of heavy-duty vehicles, in recent years, with the passage of time, and we examine the technology lifecycle, from the perspective of physical characteristics and technical features. The results show that the technology of the studied heavy-duty vehicles (Titan) is close to the time of his fall, because spending puberty, so, according to the investigation of new technologies, we should strive to create changes in vehicle technology.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.367-370
• /
• 2005

Offer of medical treatment service for recovery or preservation of physical spiritual function of elderly people by sudden population graying developing is essential. Therefore, according to increase of elderly's medical treatment demand, medical treatment service request is augmented. Number of medical treatment service utilization wishes to grope medical treatment service support way for elderly residing cloth elevation laying stress on elderly's Aging in Place in increase trend in this research. If decide, is as following : First, national hospital and public health center were concentrated most on Seoul and kyonggi, and there were many hospitals to south of a river nine, Songpagu, Seochogu, and public health center was expose that is one by one to each nine. Second, in the case of Seoul, elderly population ratio was expose that comparatively high Yeongdeungpo, Chongno, Yongsan, west passage nine is few hospital number relatively in elderly's residential area. Third, need that establish elderly full text clinic on part of general hospital or university hospital equipment. Fourth, must do so that can use access as is easy little more in local community to all elderly who need medical treatment service of visit nursing, visit medical examination and treatment etc.. that consist in present public health center.