• 한국재료학회지
• /
• 제28권1호
• /
• pp.6-11
• /
• 2018

There are various manufacturing processes for pure $SiO_2$ that is used as abrasives, chemicals, filters, and glasses, and in metallurgy and optical industries. In the optical fiber industry, to produce $SiO_2$ preform, $SiCl_4$ is utilized as a raw material. However, the combustion reaction of $SiCl_4$ has caused critical environmental issues, such as ozone deficiency by chlorine compounds, the greenhouse effect by carbon dioxide and corrosive gas such as hydrochloric acid. Thus, finding an alternative source that does not have those environmental issues is important for the future. Octamethylcyclotetrasiloxane (OMCTS or D4) as a chlorine free source is recently promising candidate for the $SiO_2$ preform formation. In this study, we first conducted a vaporizer design to vaporize the OMCTS. The vaporizer for the OMCTS vaporization was produced on the basis of the results of the vaporizer design. The size of the primary particle of the $SiO_2$ formed by OMCTS was less than 100 nm. X-ray diffraction patterns of the $SiO_2$ indicated an amorphous phase. Fourier-transform infrared spectroscopy analysis revealed the Si-O-Si bond without the -OH group.

• 멤브레인
• /
• 제24권1호
• /
• pp.20-30
• /
• 2014

C/N 비가 낮은 농촌마을 하수의 고도처리를 위하여 $0.4{\mu}m$의 세공크기를 갖고 있는 평막이 침지된 연속회분식 반응기를 사용하였다. 분말활성탄의 투입, 폭기량 및 유입 유기물 농도가 처리효율과 여과 성능에 미치는 영향을 조사하였다. 54일 이내의 조업 초기에서는 C/N 비가 증가할수록 COD, T-N 및 T-P의 제거율과 MLSS 농도는 증가하였다. 조업 89일 후의 COD, T-N 및 T-P의 제거율은 각각 97.1%, 75.0% 및 48.3%이었다. 막여과에 의해 처리수에서 SS는 검출되지 않았으며, T-P의 제거율이 낮게 나온 이유는 과잉의 슬러지를 배출하지 않았기 때문이다. 분말활성탄을 투여한 경우 조업이 진행됨에 따라 분말활성탄의 혼합강도와 충돌빈도가 증가하여 슬러지의 입자크기가 감소하였으며, 이로 인해 분말활성탄을 투여하지 않은 경우에 비해 TMP 상승이 크게 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권8호
• /
• pp.1165-1169
• /
• 2002

Palm kernel cake (PKC), a by-product of oil palm seeds after extraction of their oil. The aim of this study was to investigate the effects of different levels of PKC on growth performance and blood lipids in rats. A total of 64 Sprague-Dawley (8 weeks of age) male rats were assigned individually to four treatments with different levels of PKC in the diet: 0, 15, 20 and 25%. No differences (p<0.05) were found in daily feed intake (6-8 g/day), body weight, growth rate and epididymal fat weight for all the dietary groups. Plasma protein and very low density lipoprotein (VLDL) triacylglycerol (TG) were higher (p<0.05) for 20% PKC fed rats than the control rats. Conversely, the plasma cholesterol and TG and VLDL-phospholipid (PL) concentrations of the control rats were higher (p<0.05) than those of PKC fed rats. The VLDL-protein, total cholesterol, free cholesterol (FC) and cholesteryl ester (CE) were not significantly different (p>0.05) among the treatment groups. Rats fed PKC had greater (p<0.05) ratios of total surface to core lipid components [(FC+PL)/(CE+TG)] than control rats. The results reflect dissimilarities of VLDL particle size between PKC treatment and control rats, where the plasma of the PKC treated rats contained more lipid rich VLDL. In conclusion, there was no adverse effect on growth performance when inclusion of PKC up to 25%. However, fibre content may affect the plasma lipid concentrations.

• 공업화학
• /
• 제18권1호
• /
• pp.84-89
• /
• 2007

본 연구에서는 열플라즈마 직접분해법에 의해 메탄과 프로판으로부터 수소와 카본 블랙을 생성하는 공정에 대해 조사하였다. 메탄과 프로판의 직접분해 시 열역학적 평형조성을 깁스 자유에너지의 최소화에 근거하여 계산하였으며, 이를 바탕으로 직접분해 실험을 수행하였다. 탄화수소의 직접분해에 의해 생성된 수소의 순도는 분해가스 유량에 의존하는 것으로 나타났으며, 고순도의 수소를 얻기 위한 분해 조건을 조사하였다. 메탄을 분해가스로 사용한 경우 프로판의 경우보다 높은 수소의 순도를 나타내는데, 이는 열플라즈마에 의해 생성된 라디칼의 재결합 등으로 인한 메탄이나 에탄, 그리고 아세틸렌과 같은 부산물이 프로판의 경우에 더욱 많이 생겨나기 때문인 것으로 조사되었다. 생성된 카본블랙은 X선 회절분석과 Raman Spectroscopy 분석을 통해 결정성을 조사하였으며, SEM 분석 및 입도 분석을 통해 카본블랙의 입자 모양과 크기를 조사하였다. 그 결과 구형이며 결정성이 양호한 카본블랙이 생성되었음을 확인하였으며, 메탄으로부터 생성된 카본 블랙이 프로판으로부터 생성된 카본블랙보다 평균 입자 크기가 작은 것으로 나타났다.

• 공업화학
• /
• 제18권6호
• /
• pp.625-629
• /
• 2007

최근 피부친화성, 흡수력, 나노 입자의 제조 등에 우수한 특성을 지닌 불포화 레시친에 대한 관심이 높아지고 있다. 이에 따라 불포화레시친의 산화안정성을 높이고, 변질되기 쉽고 독성을 지닌 합성화합물을 대체하는 천연물을 개발하고자 하였다. 결과, 하늘타리(T. kirilowii Maximowicz)의 열매와 뿌리의 성분분석을 한 결과 항산화 성분으로는 갈릭산, 카페인산, 3,5-디하이드록시벤조익산, 플라보논이 검출되었다. 총 폴리페놀 함량은 열매추출물(53.5 mg/g)보다 뿌리추출물(133.85mg/g)에서 높게 나타났고 프리라디칼 제거 및 지질산패 억제효과 또한 뿌리 추출물이 우수하였으며 뿌리 추출물은 폴리페놀 함량이 100 ppm 이상일 때 대조군으로 사용한 BHT보다 약 20.1%, 19.2% 높게 나타났다. 또한 하늘타리 추출물은 1250ppm 이하에서 95% 이상의 높은 세포 생존율을 나타내어 안전성이 우수하였다. 리포좀의 안정성에 대한 효과는 열매보다 뿌리추출물이 우수하였으며 뿌리추출물은 대조군인 BHT에 비해 항산화 효과 15.1%, 제타전위 13.9% 높았으며, 입자크기는 9.3% 낮아 기존의 합성 원료보다 우수하였다

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.134-142
• /
• 2011

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Exhaust pipes with circular fin were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The gases examined in this study were oxides of nitrogen (NOx), carbon dioxide ($CO_2$) and carbon monoxide (CO). In addition, $O_2$ concentration in the exhaust was measured. The designs adopted in this study were about exhaust pipes with solid and hollow fins around them direct surface force measurement in water using a nano size colloidal probe technique. The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true Carbon nano Colloid size (<10 nm), surface forces are increasingly important. Nano particles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. The current tools for directly measuring interaction forces such as a surface force apparatus or atomic force microscopy (AFM) are limited to particles much larger than nano size. This paper use Water and CNC fluid at normal cooling system of EGR. Experimental result showed all good agreement at Re=$2.54{\times}10^4$ by free convection and Re=$3.36{\times}10^4$ by forced air furnace.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.201-212
• /
• 2002

This study investigated the shear bond strengths between abrasion-resistant denture teeth and composite resins according to surface treatments. Denture teeth for this study were Trubyte IPN teeth(Dentsply Inc., USA) with interpenetrating polymer network and Endura Posterio (Shofu Inc. Japan) of composite resin teeth, and restorative composite resins were Clearfil FII (Kuraray, Japan) of the self-cured composite resin and Z100(3M Dental Product, USA) of the light-cured composite resin. Five different surface treatments were evaluated: (1) $50{\mu}m\;A1_2O_3$ sandblasting: (2) #100 carbide paper; (3) chloroform; (4) retentive holes; and (5) no treatment. After surface treatments, denture teeth were examined by scanning electron microscopy(SEM), and the maximum shear bond strengths between abrasion-resistant denture teeth and composite resins were measured using Instron. The results were as follows; 1. IPN teeth treated with sandblasting had the highest shear bond strength, and Endura treated with sandblasting and carbide paper had significantly greater shear bond strength than with any other surface treatment. 2. Regardless or composite resins, the shear bond strength on Endura was greater than on IPN teeth. 3. Regardless of denture teeth, the shear bond strength of Clearfil FII was greater han of Z100. 4. In appearance of SEM, IPN teeth treated with sandblasting showed generalized roughness on the all of surface, however, carbide paper treatment resulted in partly rough. Endura treated with sandblasting and carbide paper showed similar surface characteristics. Wetting denture teeth surface with chloroform removed the debris and created a particle-free and smooth surface.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.197-203
• /
• 2020

PURPOSE. The aim of this study was to evaluate the effect of multiple firings on the bond strength between yttriatetragonal zirconia polycrystals (Y-TZP) and 2 types of resin cements. MATERIALS AND METHODS. Sixty 3Y-TZP specimens (LAVA Frame Multi) were divided into 3 groups depending on the following firing procedures: (1) 2-firing cycles, (2) 5-firing cycles, (3) 10-firing cycles. Two samples from each group were investigated by using SEM to determine the morphological changes. All specimens were treated with 125 ㎛ airborne-particle abrasion and the surface roughness of each specimen was measured. The specimens from each firing group were then further divided into 2 subgroups (n = 9) to apply 2 types of resin cement (MDP-free resin cement: RelyX Unicem-RU, and MDP containing resin cement: Panavia F 2.0-PA). The shear bond strength (SBS) test was performed and failure types of all the debonded specimens were classified by using a stereomicroscope as adhesive, cohesive, and mixed. The statistical analysis of surface roughness and SBS data were performed by using 1-way ANOVA and 2-way ANOVA followed by Tukey-HSD tests (α=.05). Failure modes were calculated as a percentage for each group. RESULTS. The bond strength of RU and PA to the specimens obtained with 2 firings were not statistically different from each other (P=.1). However, the SBS values of PA were found to be significantly higher than RU for the specimens obtained with 5 and 10 firing cycles (P=.001 and P=.02, respectively). Surface roughness analysis revealed no statistical difference between groups (P=.2). The SEM analysis of samples fired 5- and 10- times showed irregularities and boundary loss in zirconia grains, and empty spaces between zirconia grains. CONCLUSION. The bond strength of PA cement was higher than that of RU to the zirconia subjected to repeated firings (5 and 10 firing cycles). When zirconia is subjected to multiple firings, using MDP-containing resin cement can be recommended.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.66-72
• /
• 2006

The purpose of this study is to develop novel nanoparticles based on polyion complex formation between low molecular weight water-soluble chitosan (LMWSC) and all-trans retinoic acid (atRA). LMWSC nanoparticles encapsulating atRA based on polyion complex were prepared by mixing of atRA into LMWSC aqueous solution using ultrasonication. In FTIR spectra, the carbonyl group of atRA at 1690 $cm^{-1}$ disappeared or decreased when ion complexes were formed between LMWSC and atRA. In ${1}^H$ NMR spectra, specific peaks of atRA disappeared when atRA-encapsulated LMWSC (RAC) nanoparticles were reconstituted into $D_{2}O$ while specific peaks both of atRA and LMWSC appeared in $D_{2}O$/DMSO (1/3, v/v) mixture. XRD patterns also showed that the crystal peaks of atRA were disappeared by encapsulation into LMWSC nanoparticles. LMWSC nanoparticles encapsulating atRA have spherical shapes with particle size below 200 nm. The mechanism of encapsulation of atRA into LMWSC nanoparticles was thought to be an ion complex formation between LMWSC and atRA. LMWSC nanoparticles showed high atRA loading efficiency over 90$\%$ (w/w). AtRA was continuously released from nanoparticles over 10 days. In in vitro cell cytotoxicity test, free atRA showed higher cytotoxic effect against CT 26 colon carcinoma cell line on 1 day. However, RAC nanoparticles showed similar cytotoxicity against CT 26 cells on 2 day. These results suggest the potential for the introduction of LMWSC nanoparticles into various biomedical fields such as drug delivery.

• 폴리머
• /
• 제28권6호
• /
• pp.455-459
• /
• 2004

폴리(에틸렌 옥사이드) (PEO)를 기초로 한 전해질의 이온 전도도는 같은 조성인데도 불구하고 보고 된 값은 연구자에 따라 수천 배의 차이가 난다. 한편 세라믹 입자를 충전하면 열적 취급에 따라서 이온전도성이 수천 배 변할 수 있음이 보고되고, 그 원인이 세라믹 입자-PEO 고분자의 상호작용 때문인 것으로 논의되었다. 본 연구에서는 세라믹 입자가 충전되지 않은 PEO$_{10}$LiClO$_4$ 고분자 전해질에 대해서 여러 가지 열적 조건에 따른 이온 전도도의 변화 양상을 조사하고, 이온 전도도 값이 열적 이력에 따라 같은 시료에서도 수백 배 정도 차이가 날 수 있음을 보였다. 이는 PEO의 재결정화 과정이 너무 느리기 때문인 것으로 분석하였다. 따라서 본 연구 결과는 세라믹 충전제 효과가 전도도 이완 현상의 주원인이 아니라는 것을 나타낸다.다.