• 한국해양공학회지
• /
• 제28권2호
• /
• pp.93-101
• /
• 2014

In general, particle simulation methods such as the MPS(Moving Particle Simulation) or SPH(Smoothed Particle Hydrodynamics) methods have some serious drawbacks for pressure solutions. The pressure field shows spurious high fluctuations both temporally and spatially. It is well known that pressure fluctuation primarily occurs because of the numerical approximation of the partial differential operators. The MPS and SPH methods employ a pre-defined kernel function in the approximation of the gradient and Laplacian operators. Because this kernel function is constructed artificially, an accurate solution cannot be guaranteed, especially when the distribution of particles is irregular. In this paper, we propose a particle simulation method based on the moving least-square technique for solving the partial differential operators using a Taylor-series expansion. The developed method was applied to the hydro-static pressure and dam-broken problems to validate it.

• 한국해양공학회지
• /
• 제31권1호
• /
• pp.14-21
• /
• 2017

The erosion of solid particles in a pipe elbow was numerically investigated. A numerical procedure to estimate the sand erosion rate, as well as the particle motion, in the pipe elbow flow was introduced. This procedure was performed based on the combined empirical erosion model and computational fluid dynamics (CFD) analysis to consider the interaction between the particle motion and the eroded surface. The underlying turbulent flow on an Eulerian frame is described by the Reynolds averaged Navier-Stokes (RANS) equations with a $k-{\epsilon}$ turbulent model. The one-way coupled Eulerian-Lagrangian motion of the air flow and sand particles is employed to simulate the particle trajectories and particle-wall interactions on the pipe surfaces. The predicted CFD erosion magnitudes are compared with experimental data from pipe elbows. The erosion rate results do not reveal a good accordance between the simulation and experimental results. It seems that the CFD shows a slightly over-predicted erosion ratio.

• 한국게임학회 논문지
• /
• 제14권3호
• /
• pp.55-62
• /
• 2014

파티클 기반의 유체 시뮬레이션에서 파티클 들이 경계면에 부딪쳐 쇄파를 일으키는 경우 과도한 움직임으로 인해 자연스러운 흐름을 표현하기 어렵다. 파티클이 이동하는 시간 간격을 세분화하여 선형보간 함으로써 이 문제를 해결할 수 있다. 이렇게 하면 경계면에 모여 압력이 높아진 파티클 들의 가속도 벡터가 부드럽게 변한다. 하지만 보간을 하기위한 최소 샘플수가 높기 때문에 파티클 들이 점성을 가진 액체처럼 뭉치는 문제가 발생한다. 본 연구에서는 이 문제를 해결하기 가중치 보간 방식을 사용한다. 가중치 보간은 파티클의 현재 가속벡터와 이전 가속벡터에 서로 다른 가중치를 주며 차례로 더해 이동벡터를 구한다. 가중치 보간 방식을 쓰면 비슷한 흐름을 표현하는데 필요한 샘플수가 선형 보간 방식보다 적다. 그 결과로 점성을 가진 액체처럼 뭉치는 선형보간 방식의 문제점을 해결할 수 있다.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.81-89
• /
• 2016

Numerical simulations are carried out for the fluid flow and particle transport around two nearby circular cylinders in a side-by-side arrangement. The present study aims to understand the effects of the particle Stokes number and the spacing between two cylinders on particle dispersion and deposition characteristics. Simulations are based on an Eulerian-Lagrangian approach where the motion of particles is calculated by a Lagrangian approach based on one-way coupling. Results show that the flow structure is very different depending on the cylinder spacing, eventually affecting the overall pattern of particle dispersion significantly. It is also found that particles with smaller Stokes number tend to be distributed more uniformly in the wake of two cylinders, being located even inside the vortex cores. Meanwhile, particle deposition is analyzed in terms of the deposition efficiency and deposition location. The deposition efficiency of particles strongly depends on the Stokes number, whereas it is slightly affected by the cylinder spacing. The deposition location gets wider as the Stokes number increases, and it becomes asymmetric about the center of each cylinder as the cylinders get close.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.243-246
• /
• 2012

A new multi inner stage(MIS) cyclone was designed to remove the acidic gas and minute particles of harmful materials produced from electronic industry. To characterize gas flow in MIS cyclone, pressure and velocity distribution were calculated by means of computational fluid dynamics(CFD) commercial program. Also, the flow locus of particles and particle removal efficiency were analyzed by Lagrangian method. When outlet pressure condition was -1,000 Pa, the efficiency was the best in this study. Based on the CFD simulation result, the pressure loss and destruction removal efficiency was measured through MIS cyclone experiment.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.278-285
• /
• 2011

In the present study, the numerical prediction of the oil amount leaked from the hole of a damaged tank is investigated using the improved MPS (Moving Particle Semi-implicit) method, which was originally proposed by Koshizuka and Oka (1996) for incompressible flow. The governing equations, which consist of the continuity and Navier-Stokes equations, are solved by Lagrangian moving particles, and all terms expressed by differential operators should be replaced by the particle interaction models based on a Kernel function. The simulation results are validated though the comparison with the analytic solution based on Torricelli's equilibrium relation. Furthermore, a series of numerical simulations under the various conditions are performed in order to estimate more accurately the initial amount of leaked oil.

• 한국수자원학회논문집
• /
• 제54권6호
• /
• pp.365-379
• /
• 2021

수문 모형 매개변수는 모형 모의에 필수적이며, 지형, 기후조건, 기후변화와 인간 활동으로 인해 시간에 따라 달라질 수 있다. 결과적으로 고정된 매개변수의 사용은 부정확한 하천유량 모의로 이어질 수 있다. 본 연구의 목표는 하천유량 관측자료를 이용하여 시간에 따라 변하는 매개변수를 추정하는 방법을 살펴보고, 하천유량 자료가 모형에 동화될 때 모의 효율성이 어떻게 변하는지 분석하는 것이다. 자료 동화 방법은 변화하는 다양한 환경에 적응하여 수문 모형의 매개변수를 자동으로 추정하기 위하여 사용될 수 있다. 입자 필터를 이용하여 하천유량 관측치를 2개 매개변수 월 물 수지 모형에 동화했다. 자료 동화 방법으로 시간변화 매개변수를 사용한 모의 결과는 SCEM 방법으로 고정 매개변수를 사용한 모의 결과와 비교되었다. 먼저 다양한 시나리오에 기반한 합성 실험을 수행하여 입자 필터 방법이 시간에 따라 변화하는 매개변수를 적절하게 추적할 수 있는지를 살펴보았다. 이후 실제 유역에 적용하여 시간에 따라 변화하는 매개변수와 고정된 매개변수를 사용하였을 때의 하천유량 예측성능과 비교하였다. 본 연구를 통해 얻은 결론은 다음과 같다. (1) 전체적인 월 하천유량 시계열의 예측성능은 입자 필터 방법과 SCEM 방법이 서로 비슷하였다. (2) 우기를 제외한 시기의 월 유출고 예측성능은 자료 동화 방법을 이용한 주기적으로 변화하는 매개변수에 의한 모의가 더 우수하였다. (3) 동화에 사용되는 하천유량 관측자료의 불확실성은 입자 필터의 하천유량 예측성능에 중요한 역할을 하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.9-11
• /
• 2003

A homogeneous flow field including more than 2000 spherical particles was directly simulated. Particles are settling by gravity with the Reynolds number ranging from 50 to 300, based on diameter and slip velocity. Particular attention was focused on the distribution of particles. The Reynolds-number dependence, influences of particle rotation and loading ratio, and the dynamics of particle clusters are discussed. In the higher Reynolds number case, the wake attraction causes particle clusters and the average drag coefficient decreases significantly. Non-rotating particles maintain cluster structure and rotating ones moves randomly in the horizontal direction. It is because of the difference in the direction of the lift force.

• 한국컴퓨터그래픽스학회논문지
• /
• 제14권4호
• /
• pp.1-5
• /
• 2008

본 논문은 유체 시뮬레이션의 격자 내 상세도를 와류입자법(Vortex Particle Method)를 사용하여 향상시킬 수 있는 새로운 방법을 제안한다. 비압축 Navier-Stokes 방정식을 풀어 낸 속도장(Velocity Field)으로 유체의 거시적인 움직임을, 와류입자법으로 생성한 와도장(Vorticity Field)으로 유체의 미세한 움직임을 표현한다. 이 기법은 고해상도 격자에서 선형시스템을 풀지 않기 때문에 고해상도 유체 시뮬레이션을 효율적으로 할 수 있고, 강한 난류 효과를 만들어 낼 수 있다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.501-512
• /
• 2012

Social welfare maximization in a double-sided auction market is performed by implementing an aggregation-based particle swarm optimization (CAPSO) algorithm for optimal placement and sizing of one Static Synchronous Series Compensator (SSSC) device. Dallied simulation results (without/with line flow constraints and without/with SSSC) are generated to demonstrate the impact of SSSC on the congestion levels of the modified IEEE 14-bus test system. The proposed CAPSO algorithm employs conventional quadratic smooth and augmented quadratic nonsmooth generator cost curves with sine components to improve the accurate of the model by incorporating the valve loading effects. CAPSO also employs quadratic smooth consumer benefit functions. The proposed approach relies on particle swarm optimization to capture the near-optimal GenCos and DisCos, as well as the location and rating of SSSC while the Newton based load flow solution minimizes the mismatch equations. Simulation results of the proposed CAPSO algorithm are compared to solutions obtained by sequential quadratic programming (SQP) and a recently implemented Fuzzy based genetic algorithm (Fuzzy-GA). The main contributions are inclusion of customer benefit in the congestion management objective function, consideration of nonsmooth generator characteristics and the utilization of a coordinated aggregation-based PSO for locating/sizing of SSSC.