• 환경위생공학
• /
• 제17권2호
• /
• pp.11-17
• /
• 2002

Diesel particulate matter (DPM) is known to be one of the major harmful emissions produced by diesel engines. The majority of diesel particles are in the range of smaller than $I{\mu}\textrm{m}$. Because of their tiny volume, ultrafine diesel particles contribute very little to the total mass concentration which is currently regulated for automobile emissions. Diesel particles are known to have deleterious effects upon human health because they penetrate human respiratory tract and have negative effects on the health. The measurement of the number distribution of nanometer size particles (nanoparticles) in the diesel exhaust emission is important in order to evaluate their environmental and health impact, and to develop new types of diesel particulate filters. In this study, we directly sampled particulate matters emitted from a diesel truck mounted on the chassis dynamometer by a flow separator and dilution system, and measured the nanoparticles using two types of differential mobility analyzers combined with a Faraday cup electrometer (FCE) and a condensation particle counter (CPC). The particle size distributions were analyzed by changing engine operation condition, i.e. ratio of engine loading. The total number concentration of particles were increased with the engine loading ratio and the nanoparticles (less than 50nm) were affected by hydrocarbon (HC) concentration in the diesel exhaust.

• 한국환경보건학회지
• /
• 제29권3호
• /
• pp.91-96
• /
• 2003

This study was intended as an investigation of characteristics of background site atmospheric respirable particulate matters(RPM), and fine particles(<2.5 ${\mu}{\textrm}{m}$). The particle size distributions during the phenomenon of Yellow Sand(YS) occurs from April, 2001. Atmospheric aerosol particulate matter was directly collected on the Jeju island between 1 to 30, April, 2001 using an eight-stage cascade impacter(particle size range: 0.43-11 ${\mu}{\textrm}{m}$), and cyclone separator(cut size: 2.5, 10 ${\mu}{\textrm}{m}$). The episode of YS observed in background monitoring site, Kosan and appeared 2 times at sampling period. The mass concentrations of fine and coarse particles for YS episode were 34.2 and 59.6 $\mu\textrm{g}$/㎥, respectively, which were significantly increased amounts compared to 13.3 and 13.0 $\mu\textrm{g}$/㎥ for NonYS(NYS). Most size distributions had two peaks, one at 0.43∼.65 ${\mu}{\textrm}{m}$ and the other at 3.3${\mu}{\textrm}{m}$4.7 ${\mu}{\textrm}{m}$. The result of analysis of water-soluble ion component indicated that sulfate was mainly ion component, but nitrate and calcium ion was significantly increased at the YS episode.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.87-91
• /
• 2009

This study investigates possibility for practical use through small sized test with OPC and substituted fly ash 10% and return coarse cement (RCC), classed 1100${\sim}$1200 cm2/g, which is made by Cyclone Separator at cement producing process 20% (CF) for OPC. The experimental factors are 48% of W/B and OPC and 2 kinds of concrete proportions. The target slump and air content are $150{\pm}25$ mm and $4.5{\pm}1.5$ %. For the results, the flowalility and air content of CF are less than OPC because it needs more superplasticiser and air-entraining agent. The temperature history of CF is lower than OPC about $6{\sim}10^{\circ}C$. For the strength properties, CF is less than OPC, but their gap is declined at 28 days. The strength of the specimens are ordered by standard curing, field cured specimens, and core specimens.

• 한국초지조사료학회지
• /
• 제34권4호
• /
• pp.288-295
• /
• 2014

본 연구는 옥수수 사일리지를 이용하여 TMR 제조 시 배합시간에 따른 물리적 특성(Particle size, peNDF 및 laceration)의 변화를 조사하고, 반추위 내 in situ 건물분해율 및 비유중기 착유우의 유생산성에 미치는 영향을 조사하고자 수행되었다. TMR 시험사료는 동일한 원료를 이용하여 배합시간을 30분(T1구)과 50분(T2구)으로 제조하였다. Penn State Particle Size Separator (PSPS, 19 mm와 8mm 체)로 분리하여 입자크기의 분포를 분석한 결과 배합 시간이 30분(T1)에서 50분(T2)로 증가함에 따라 하층(<8mm)의 비율이 유의적으로 증가하였고(p<0.01), $peNDF_{&gt;8.0}$는 유의적으로 감소하였으며(p<0.01), 굵은 비율(${\geq}1mm$) 이 유의적으로 감소하였다(p<0.01). 반추위 내 in situ 건물 분해율은 모든 배양시간에서 처리구간 차이가 없었지만 24시간 배양에서 T1구에서 유의적으로 높게 나타났다. (p<0.01). 산유량은 처리구간 차이가 없었지만 유지방은 T1이 유의적으로 높게 나타났다(p<0.01). 본 연구 결과에서 옥수수 사일리지 위주의 TMR 제조 시 배합시간을 단축 조절함으로서 산유량 및 유성분에 대한 부정적 영향 없이 조사료의 물리적 사료가치를 증진하는데 효과가 있을 것으로 기대된다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.153-158
• /
• 2000

Flow visualization and PIV measurements were conducted to investigate the flow characteristics of multi-channel with inclination angle. The water flow seeded with tiny vegetable powder as tracers revealed details of flow field. The PIV measurement to acquire multi-point velocity data simulatneously was carried out at three space of plates for 5, 10, and 15mm with variation of inlet flow rates of $0.25m^3/h$ and <$0.5m^3/h.$ Experiment results show that space of plates acts a significant role in separating process.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.97-105
• /
• 1998

The goal of this study is to investigate the potential application of triboelectrostatic separation process for removing unburned carbon from fly ash. The process utilizes the difference in electrical charging characteristics between the organic material (carbon) and the mineral matter (fly ash). In the present work, dry separation tests have been conducted on Samchunpo fly ash samples using a bench - scale analytic separator. The test variables studied include air rate, feed rate, electric field strength, particle size, charger material and length, etc. The best separation results were obtained at the air rate 501/min, feed rate 15 g/min and voltage 15 ㎸. The fly ash with carbon content below 1 % was obtained with over 65% recovery.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.425-427
• /
• 1994

A manipulator which can separate dielectric particles (biological cells) was fabricated on a silicon wafer using polyimide and n-type electroplating. It consists of 1024 electrode arrays ($60{\mu}m{\times}60{\mu}m$) and spacing insulator. Positive dielectrophoresis is used for attracting particles. We have the solution of 3-D laplace equation about this device and calculate the force acting on the particles. The solution has spatial periodicity in the x, y directions and decays exponentially in the z direction.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.293-298
• /
• 2016

6M의 KOH 수계 전해액에 potassium polyacrylate (PAAK)가 3 wt.% 포함된 하이드로겔 전해질을 제조하고, 이에 친수성 실리카 OX50을 1 wt.% 포함시킨 하이드로겔 전해질을 함께 제조하고, 이를 Scimat 분리막에 코팅 및 건조하여 활성탄 수퍼커패시터의 자기지지체 전해질/분리막으로 사용하여 그 실리카 첨가효과를 조사하였다. 실리카 입자는 다공성 분리막 지지체의 표면기공에 균일하게 분포하여 하이드로겔의 이온전도도와 전기화학적 안정성을 향상시켰으며 이에 따라 고속스캔 조건에서도 활성탄 수퍼커패시터의 비축전용량이 비교적 높게 유지되었는데, 이는 실리카가 포함된 하이드로겔 전해질이 활성탄 전극과 분리막 사이에서의 계면저항이 감소하기 때문이다.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.355-361
• /
• 2009

선택적 고체순환을 위한 2탑 유동층 공정에서 고체분리기에 의한 고체분리속도에 미치는 조업변수들의 영향을 측정 및 고찰하였다. 본 연구에서 개발한 고체분리기를 이용하여 굵은입자(212~300 또는 $425{\sim}600{\mu}m$)와 고운입자($63{\sim}106{\mu}m$)의 분리가 가능하였으며 고체분리속도는 66~987 g/min의 범위를 나타내었다. 고체분리속도는 고체분사노즐의 유속, 고체층 높이, 고체분사노즐의 직경, 고운입자와 굵은입자의 입자크기 차이, 고체분리기 금속망 간극크기 및 혼합입자 중 고운입자의 무게분율이 증가함에 따라 증가하였으며 유동화 속도의 영향은 크지 않았다.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.364-369
• /
• 2017

Ceramic powder, such as MgO, is added as a binder to prepare the green compacts of molten salts of an electrolyte for a thermal battery. Despite the addition of a binder, when the thickness of the electrolyte decreases to improve the battery performance, the problem with the unintentional short circuit between the anode and cathode still remains. To improve the current powder molding method, a new type of electrolyte separator with porous MgO preforms is prepared and characteristics of the thermal battery are evaluated. A Spherical PMMA polymer powder is added as a pore-forming agent in the MgO powder, and an organic binder is used to prepare slurry appropriate for tape casting. A porous MgO preform with $300{\mu}m$ thickness is prepared through a binder burnout and sintering process. The particle size of the starting MgO powder has an effect, not on the porosity of the porous MgO preform, but on the battery characteristics. The porosity of the porous MgO preforms is controlled from 60 to 75% using a pore-forming agent. The batteries prepared using various porosities of preforms show a performance equal to or higher than that of the pellet-shaped battery prepared by the conventional powder molding method.