• Journal of Radiation Protection and Research
• /
• 제39권4호
• /
• pp.159-167
• /
• 2014

국내에서는 2012년 천연방사성핵종이 포함된 가공제품의 규제를 위해 생활주변방사선 안전관리법이 시행되었지만, 해당 가공제품 사용에 대한 인체 피폭선량을 평가할 수 있는 기초자료나 피폭선량 평가기술이 미비하다. 따라서 본 연구는 사용자 피폭선량을 정량적으로 평가하기 위한 방법을 제안하고, 방사선의 종류 및 에너지에 따른 피폭선량 특성의 확인을 목적으로 한다. 피폭선량 평가를 위해서 몬테칼로 방법을 사용한 Monte Carlo N-Particle Extended (MCNPX) 코드를 통해 International Commission on Radiological Protection (ICRP)의 기준팬텀이 전산모사 되었으며, 대표적 천연방사성핵종인 우라늄 계열에서 발생되는 알파선, 베타선, 감마선의 최소, 중간, 최대 에너지가 선원항으로 사용되었다. 연간 유효선량은 가공제품 사용시간 및 사용위치를 고려한 피폭시나리오를 기반으로 평가되었다. 짧은 비정의 알파선 및 베타선은 대부분의 선량을 피부에 전달한 반면, 감마선은 대부분의 장기에 유사한 선량을 전달하였다. 방사능이 $1Bq{\cdot}g^{-1}$ 인 돌침대에 포함된 천연방사성핵종의 함유율이 10%라고 가정하고 한국인 평균 수면시간인 7시간 50분간 돌침대를 사용하였을 때 최대 연간 유효선량은 알파선, 베타선, 감마선에 대해서 각각 0.0222, 0.0836, $0.0101mSv{\cdot}y^{-1}$로 평가되었다.

• 에너지공학
• /
• 제7권1호
• /
• pp.146-156
• /
• 1998

석탄을 연소한 후 형성되는 석탄회는 미세한 분말상태로 입자의 형상은 다공성이며 단단한 구형입자로 이루어져 있다. 본 연구에서는 국내 발전소에서 생성된 9종의 석탄회의 물리적, 형태적 및 화학적 조성 분석을 통해 국내 석탄회 데이터 베이스화, 연소효율 개선, 석탄회 집진설비인 전기집진기의 성능향상과 석탄회의 재활용에 기여하고자 한다. 석탄회의 물리적 특성은 입도분포와 비중을 입자카운터와 한국공업규격(KS L-5110)에 따른 비중 측정계를 이용하였으며, 형태적 특성은 입자의 구형성 정도, 표면특성 그리고 색상변화 등을 전자현미경(SEM)과 광학현미경을 이용하였다. 그리고 화학적 특성을 파악하기 위해 유도결합 플라즈마방출 분광기(ICP)와 에너지스펙트럼 분석기(EDXA)를 이용하여 석탄회의 구성성분을 분석하였고 한국공업규격 KS L-5405에 따른 석탄회에 함유된 미연탄소분을 측정하였다. 삼천포 화력발전소 전기집진기에서 포집한 석탄회에 대한 질량평균입경은 각각 15~25 $\mu\textrm{m}$로 나타났다. 석탄회 입자의 형상은 석탄 입자가 보일러의 연소 영역에 노출되는 정도에 따라 구형성, 투명성 및 색변화가 다양하게 나타나는데 완전 연소에 가까울수록 무색의 구형입자가 형성되었다. 석탄회는 보일러 내의 연소 조건과 원탄의 성분에 따라 구형, 무정형, Cenosphere 그리고 Plerosphere와 같은 유형의 입자를 형성하며 입자간의 상호 작용에 의해 집괴, 응집 그리고 결정형의 입자군들을 형성한다. 석탄회는 산회광물질로 이루어져 있으며 주성분 SiO2, Fe2O3, Al2O3로 약 85% 이상을 차지하였으며 10% 정도는 미연탄소분으로 이루어져 있었다.

• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.163-170
• /
• 2008

Purpose: Biphasic calcium phosphates have been of great interest recently. Mixing adequate ratios of hydroxyapatite(HA) and beta-tricalcium phosphate($\beta$-TCP) allowed to control the resorption rate without distorting its osteoconductive property. This study evaluated the bone formation effect of newly developed biphasic calcium phosphate(BCP) in calvarial defect of rabbits. Materials and Methods: 6 male New Zealand rabbits were used. Four defects with 8mm in diameter were created on each animal. BCP with HA/$\beta$-TCP ratio of 7:3 and particle size of $0.5{\sim}1.0\;mm$ was used as the test group and bovine bone with $0.25{\sim}1.0\;mm$ particle size, as the control group. Both test and control group materials were randomly implanted in the calvarial defects and were covered witha polymer membrane. The animals were sacrificed after 12, 24, and 48 weeks of implantation under general euthanasia. Resin blocks were obtained and were stained by masson's trichrome for histological observation. Results: Overall results were uneventful without any defect exposure or inflammation. The amount of new bone formation and bone maturity increased with increase in healing period at both groups. New bone in test group was mostly formed along the material particle surrounded by osteoblasts, and observation of osteoblastic stream was also present. Bone maturity increased as it was closer to thedefect margins. Under the same healing period, the test group showed more bone formation than the control group with more stable bovine bone particles remaining even after 48 weeks, whereas considerable resorption took place in BCP. Almost total defect closure was observed in test group with new bone formation in the central part of the defect. However, limited new bone formation was observed in the control group. Conclusion: Within the limits of the study, the present study reveals the newly developed BCP to be a good osteoconductive material. However, further studies are needed to be conducted in a different study model with a larger sample size.

• 한국입자에어로졸학회지
• /
• 제18권3호
• /
• pp.51-59
• /
• 2022

In this work, virion concentration and its dose changes by HVAC and air cleaners were estimated in a subway station platform to control airborne infection of SARS-CoV-2. Collection efficiencies with particle size were measured for the air filter equipped in a HVAC in one subway station in Daejeon. Indoor PM_2.5 changes according to outdoor PM_2.5 with time were also measured to estimate air infiltration rate in the subway station platform. When infected persons generate virions by 10⁴, 10⁵, 10⁶, 3 × 10⁶ and 5 × 10⁶ h^-1 in a 2,400 m³ volume platform, the concentration and dose were estimated as 9, 92, 275 and 458 virions/m³ and 4, 43, 130 and 217 virions after 1 hour exposure, respectively. The concentration and dose were reduced by 70%, and 64%, respectively by operations of both HVAC (with a flow rate of 16,000 m³/h, MERV 11) and ten air cleaners(with total CADR 10,740 m³/h) compared to those without operation of both HVAC and air cleaners. However, virion dose in the platform was estimated to be too low at the general conditions due to a large space, a high air infiltration (3 h^-1) and a short residence time (usually < 10 mins) in the platform irrespective of the operations of HVAC or air cleaners. HVAC with filters and air cleaners would be more necessary in the concourse or shopping areas in the subway stations to reduce the infection dose from a few hundred to several tens virions in a hour.

• 대한화장품학회지
• /
• 제23권3호
• /
• pp.48-74
• /
• 1997

Retinlyl Palmitate, the skin normalizerm is useful to promote greater skin elasticity, to diminish lipid peroxidation and skin roughness following UV exposure, and promote a youthfulgeneral skin appearance. In manufacturing creams, Retinyl Palmitate, which is a derivative of retinol, is used since reionol is easily oxidized by heat and light. However, only a small mount of retinol, is used since using a large amount of it may be harmful to its stability. In this study, thermal stability and UV stability of W/O-, W/S-, O/W-, and MLV-type creams containing 5% of retinyl palmitate and 10% of tocopheryl acetate are measured by Chroma Meters, and the content of RP is quantitatively analyzed by HPLC at 25 $^{\circ}C$ and 45 $^{\circ}C$. Also, how RP has been changed by heat, light, etc. is measured by HPLC, and toxicity of the changed substance is studied. Particle size of each type of the cream if measured, cellular renewal is measured by using DHP and Chroma Meters in order to study their efficacy and effect, moisture content is measured by using Corneometer and Tewameter, and how much wrinkles are improved is studied by using Image Analyzer. Development of MLV-type cream containing 5% of RP and 10% of TA, and satisfying conditions for better creams has been successful.

• Journal of Dairy Science and Biotechnology
• /
• 제36권3호
• /
• pp.171-177
• /
• 2018

In this study, we aimed to investigate the effects of low-temperature encapsulation on the viability of Weissella cibaria CMU under harsh conditions and in freeze-dried foods during storage. The capsules were prepared by gelation of sodium caseinate at different concentrations (5%, 6%, 7%, and 8%) with a combination of 0.5% gellan gum and 2% $glucono-{\delta}-lactone$. The size distribution of the capsules was determined using a Mastersizer 3000 laser diffraction particle size analyzer. Scanning and transmission electron microscopy revealed that the capsule with 6% sodium caseinate had a smooth and rounded external surface, with reproducibility. The acid, bile, and heat tolerances of the encapsulated cells were significantly higher than those of the control under prolonged acid (5 h), bile (12 and 24 h), and heat (2 h) exposure, respectively. During storage for up to 6 months at $4^{\circ}C$ or $25^{\circ}C$, the viability of encapsulated Weissella cibaria CMU in beef and vegetable rice porridge was effectively improved.

• Carbon letters
• /
• 제12권4호
• /
• pp.243-248
• /
• 2011

Two different types of graphite, such as flake graphite (FG) and spherical graphite (SG), were used as anode materials for a lithium-ion secondary battery in order to investigate their electrochemical performance. The FG particles were prepared by pulverizing natural graphite with a planetary mill. The SG particles were treated by immersing them in acid solutions or mixing them with various carbon additives. With a longer milling time, the particle size of the FG decreased. Since smaller particles allow more exposure of the edge planes toward the electrolyte, it could be possible for the FG anodes with longer milling time to deliver high reversible capacity; however, their initial efficiency was found to have decreased. The initial efficiency of SG anodes with acid treatments was about 90%, showing an over 20% higher value than that of FG anodes. With acid treatment, the discharge rate capability and the initial efficiency improved slightly. The electrochemical properties of the SG anodes improved slightly with carbon additives such as acetylene black (AB), Super P, Ketjen black, and carbon nanotubes. Furthermore, the cyclability was much improved due to the effect of the conductive bridge made by carbon additives such as AB and Super P.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.195-195
• /
• 2003

Combustion generated fine particles, defined as those with aerodynamic diameters less than 2.5 m, have come under increased regulatory scrutiny because of suspected links to adverse human health effects. Transition metals are of particular interest due to the results of a number of studies that have shown cardiopulmonary damage associated with exposure to these elements and their presence in coal, residual fuel oils, sewage sludge, and other combusted fuels and wastes. This lecture will review results from multi-di sciplinary studies being conducted at EPA and elsewhere examining the physical, chemical, and toxicological characteristics of combustion generated particles. The research describes how collaborative work between combustion engineers and health scientists can provide insight on how combustion processes affect particle properties and subsequent health effects as measured by a combination of in-vitro and in-vivo studies using a variety of animal models. The focus of this lecture is on the interdisciplinary approach required to address the problem. Difficulties are discussed. Engineering aspects involved in this approach are described in detail. Physical and chemical characterizations are performed using a variety of analytical approaches including new techniques of x-ray absorption fine structure (XAFS) spectroscopy and x-ray absorption near-edge structure (XANES) deconvolution of these spectra to gather metal speciation information.

• 한국표면공학회지
• /
• 제45권1호
• /
• pp.1-7
• /
• 2012

Multi-walled carbon nanotube (MWCNT) aluminum composite powders were deposited to form coatings using a high velocity oxygen fuel (HVOF) spraying process. High thermal energy and contact with atmospheric oxygen were supplied as the MWCNT aluminum composite particles were exposed to a gas flow field at high temperature (${\sim}3.0{\times}10^3$ K) during HVOF spraying. As a result, the particles underwent full or partial melting and rapid solidification due to the high thermal energy, and the exposure to oxygen induced the interfacial reaction of MWCNTs within the particle. The electrical and mechanical properties of MWCNT aluminum composite coatings were evaluated based on microstructure analysis. Electrical resistivity, elastic modulus, and micro-hardness, of the MWCNT aluminum composite coatings were higher than those of pure aluminum coating. The contribution of MWCNTs to the aluminum matrix can be attributed to their high electrical conductivity, dispersion hardening and anchoring effects. The relationship among the properties and the interaction of the MWCNTs with the aluminum matrix is discussed.

• Asian Journal of Atmospheric Environment
• /
• 제1권1호
• /
• pp.1-8
• /
• 2007

Vehicle exhaust is a dominant source of air pollutants in urban areas. Since people are easily exposed to vehicle exhaust particles while driving a car and/or traveling via public transportation, air pollution near traffic has been extensively studied in developed countries. In this paper, investigations on vehicle-related fine particulate air pollution at roadsides and on roads in Seoul, Korea were reviewed to understand air pollution near traffic. Comparison of $PM_{10}$ concentrations in Seoul showed that roadside air is more contaminated than urban air, implying that exposure levels near vehicular emissions are more critical to sensitive persons. Concentrations of ultrafine particles and BC (black carbon) at roadsides of Seoul fluctuate highly for short durations, responding to traffic situations. Diurnal variations of ultrafine particles and BC concentrations at roadsides seem to be affected by traffic volume, mixing layer height, and wind speed. Concentrations of ultrafine particles and BC decrease as distance from the road increases due to dilution during transport. On-road air pollution seems to be more severe than roadside air pollution in Seoul. Since nearby traffic air pollution has not been well understood in Seoul, further studies including various vehicular air pollutants and representative locations are needed.