• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• 대한토목학회논문집
• /
• 제7권4호
• /
• pp.1-12
• /
• 1987

LRFD 설계형식의 개별안전계수를 확률이론에 의하여 구할 때 주로 AFOSM 방법이 이용되어 왔다. 그러나 이 방법에 의해 구한 하중 및 저항계수를 사용하면 결과적인 신뢰성지수는 목표 신뢰성지수와 다를 수 있다. 최근 Ayyub 등이 제안한 Reliability-Conditioned(RC) 방법은 목표 신뢰성지수에 부합하지만 계산의 신속성 및 일관적 체계를 유지할 수 없다. 본 연구에서 제안한 RC/AFOSM 조합방법을 이용하면 계산의 체계가 일관적이고, 다양한 설계조건에 대하여 거의 일정한 개별안전계수를 결정할 수 있으며 이로부터 결과되는 신뢰성지수도 목표 신뢰성지수에 매우 근접하다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.154-161
• /
• 2014

To study and locate partial discharge(PD) and analyze the transient state of power transformer, there is a need for a high frequency model of transformer winding and calculation of its parameters. Due to the high frequency nature of partial discharge phenomenon, there is a need for an accurate model for this frequency range. To attain this goal, a Multi-Conductor Transmission Line (MTL) model is used in this paper for modeling this transformer winding. In order that the MTL model can properly simulate the transformer behavior within a frequency range it is required that its parameters be accurately calculated. In this paper, all the basic parameters of this model are calculated by the use of Finite Element Method (FEM) for a 20kV winding of a distribution transformer. The comparison of the results obtained from this model with the obtained shape of the waves by the application of PD pulse to the winding in laboratory environment shows the validity and accuracy of this model.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.183-188
• /
• 2006

Abstract - In order to investigate the possibility of separating PD(partial discharge) and noises through the pulse analysis by use of a HFCT, pulse shapes measured by a resistive sensor and a HFCT were analyzed and adequate PA(pulse analysis) algorithms were studied. For the purpose, the HFPD detection and PA system has been developed. Also void discharges and air corona were adopted as the artificial defect and noises, respectively. As a result, it is possible to separate partial discharges and noises through the PA method using the $100kHz{\sim}20MHz$ frequency range HFCT. It is expected to apply the developed system to on-site PD measurements for the electric equipments.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.189-196
• /
• 1986

Linear second-order matrix systems representing dynamics of large flexible structures are recast in a state space form. By can efficient partial decoupling technique, a few of low frequency modes are decoupled from the rest of modes, and an optimal control procedure is developed in such a way that damping is added to the selected modes without control spillover to uncontrolled modes. Since the partial decoupling requires only eigenvectors of the sected modes, the computing time can be reduced significantly in large systems. Therefore, the method of partial decoupling and control developed in this work may be applicable to vibration contorl of large flexible space structures.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.114-118
• /
• 2022

The photovoltaic system is affected by various conditions such as temperature and irradiance. Because non-uniform irradiation and partial shading conditions affect the entire string of cells connected in series, a bypass diode is used to bypass the current flow normally. In order to find the maximum power point in partial shade conditions, it is necessary to estimate various methods of maximum power point tracking. In this paper, the hybrid method of MPPT using Lambert W function and perturbation & observation algorithm is proposed under partial shading conditions. The simulation results are obtained using MATLAB/Simulink and shows the improvement of the accuracy of MPPT.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권11호
• /
• pp.1015-1024
• /
• 2003

[1]에서 우리는 내장 소프트웨어의 시나리오들을 합성하여 테스트 모델 (GFSM)을 구하는 방법을 제안하였다. 이때 사용된 각각의 시나리오는 내장 소프트웨어가 받아들이는 외부 입력 사건에 대한 태스크들 사이의 상호작용을 기술하고 있다. 외부 입력 사건은 선택적 또는 병행적으로 발생할 수 있는데, [1]에서는 선택적인 관계만을 고려하였다. 본 논문에서는 병행적 시나리오들을 합성하여 GFSM을 생성할 때 발생하는 전이 수의 급격한 증가를 줄이기 위한 방법을 제안한다. 비동기적 메시지 전송을 수행하는 태스크들의 행위를 보존하도록 하면서 동기적으로 해석함으로써 GFSM의 전이 수를 줄이고, 또한 시나리오 기술에 사용된 MSC 명세로부터 독립 구역을 자동으로 찾아내어 인터리빙의 수를 줄이는 방법을 제안한다. 독립 구역은 최종 시스템의 상태에 변화를 주지 않는 메시지 전송들을 포함한다. 제안된 방법을 디지털 TV 소프트웨어의 시나리오에 적용하여 전이 수의 감소 효과를 얻을 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.436-450
• /
• 2017

Recently, the method based on fractional order partial differential equation has been used in image processing. Usually, the optional order of fractional differentiation is determined by a lot of experiments. In this paper, a denoising model is proposed based on adaptive fractional order anisotropic diffusion. In the proposed model, the complexity of the local image texture is reflected by the local variance, and the order of the fractional differentiation is determined adaptively. In the process of the adaptive fractional order model, the discrete Fourier transform is applied to compute the fractional order difference as well as the dynamic evolution process. Experimental results show that the peak signal-to-noise ratio (PSNR) and structural similarity index measurement (SSIM) of the proposed image denoising algorithm is better than that of other some algorithms. The proposed algorithm not only can keep the detailed image information and edge information, but also obtain a good visual effect.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제18권1호
• /
• pp.51-60
• /
• 2014

The Shortley-Weller method is a basic finite difference method for solving the Poisson equation with Dirichlet boundary condition. In this article, we review the analysis for supra-convergence of the Shortley-Weller method. Though consistency error is first order accurate at some locations, the convergence order is globally second order. We call this increase of the order of accuracy, supra-convergence. Our review is not a simple copy but serves a basic foundation to go toward yet undiscovered analysis for another supra-convergence: we present a partial result for supra-convergence for the gradient of solution.

• 컴퓨터교육학회논문지
• /
• 제14권2호
• /
• pp.83-94
• /
• 2011

생의학분야에서 문헌에 표기된 개체를 인식하기 위해 길이우선매칭기법을 빈번히 사용한다. 길이우선매칭기법은 사전을 이용한 개체인식기법으로 좋은 사전만 구축되어 있다면 빠르고 정확하게 개체를 찾아낼 수 있다는 장점을 가진다. 그러나 개체가 나열되고 중복된 단어가 생략될 경우에는 길이우선매칭기법을 이용할 경우 성능이 현저히 떨어지게 된다. 우리는 이러한 인식성능문제를 해결하기 위해 부분매칭기법을 제안한다. 제안된 부분매칭기법은 생략이 발생될 수 있다는 것을 가정하여 다수의 후보개체를 만들어 내고 그 후에 최적화 알고리즘을 통해 다수의 개체후보 중에서 가장 타당해 보이는 개체를 선택한다. 우리는 생의학분야의 개체 중에서 나열되는 경우가 빈번한 HLA 유전자, HLA 항원, HLA 대립유전자 개체들을 대상으로 길이우선매칭기법과 제안된 부분매칭기법의 개체인식성능을 분석하였다. 3종의 HLA 개체들을 인식하기 위해서 먼저 확장사전과 태그기반사전을 구축하였으며, 그 후 구축된 사전을 이용해 길이우선매칭과 부분매칭을 수행하였다. 실험결과에 따르면 길이우선매칭기법은 HLA 항원 개체에서 좋은 성능을 보였으며 부분매칭기법은 생략된 표현이 빈번한 HLA 유전자 개체, HLA 대립유전자 개체에서 좋은 성능을 보였다. 부분매칭기법은 HLA 대립유전자 개체를 대상으로 95.59%의 높은 F-score를 얻었다.